[1. Irtiseva, K., Baronins, J., Krūmiņš, J., Ozolins, J., Kļaviņš, M., & Medne, O. (2020). Development of Peat Processing Methods for Production of Innovative Products. Key Eng. Mater., 850, 9–15.10.4028/www.scientific.net/KEM.850.9]Search in Google Scholar
[2. Kommel, L., & Baronins, J. (2017). Dependence of Wear of Cu-Cr-S Alloy on Hardness and Electrical Conductivity in Sliding Electrical Contact. Solid State Phenomena, 267, 229–233.10.4028/www.scientific.net/SSP.267.229]Search in Google Scholar
[3. Arshad, A., Samarasinghe, S., Akeel, F.A.M., & Urbahs, A. (2020). A Simplified Design Approach for High-Speed Wind Tunnels. Part I: Table of Inclination. J. Mech. Sci. Technol., 34, 2455–2468.10.1007/s12206-020-0521-9]Search in Google Scholar
[4. Arshad, A., Andrew, N., & Blumbergs, I. (2020). Computational Study of noise reduction in CFM56-5B using core nozzle chevrons. In: Proceedings of the 11th International Conference on Mechanical and Aerospace Engineering (ICMAE) (pp. 162–167), IEEE, 2020.10.1109/ICMAE50897.2020.9178891]Search in Google Scholar
[5. Kalniņa, R., & Romule, A. (2020). Analysis of Ballast Water Treatment Technologies on Ships Operating in the Baltic Sea Region. Transp. Aerosp. Eng., 8, 15–20.10.2478/tae-2020-0002]Search in Google Scholar
[6. Shishkin, A., Mironovs, V., Vu, H., Novak, P., Baronins, J., Polyakov, A., & Ozolins, J. Cavitation-Dispersion Method for Copper Cementation from Wastewater by Iron Powder. Metals (Basel), 8, 920.10.3390/met8110920]Search in Google Scholar
[7. WWF International. (2009). Silent invasion – The spread of marine invasive species via ships’ ballast water. Gland, Switzerland.]Search in Google Scholar
[8. Drake, L.A., Wier, T.P., Parson, E.W.J., & Grant, J.F. (2016). Recommendations for evaluating multiple filters in ballast water management systems for US type approval. USA: Naval Research Laboratory.10.21236/AD1011773]Search in Google Scholar
[9. ALfa Laval Corporate AB. (2017). Muddy waters and filter clogging in ballast water treatment. Tigre, Argentina. Available at https://www.alfalaval.lat/globalassets/documents/products/process-solutions/ballast-water-solutions/muddy_waters_and_filter_clogging_in_ballast_water_treatment.pdf]Search in Google Scholar
[10. Andersen, A.B. (2017). Should you Accept Stainless Steel Filter-Screens in your Ballast Water Management System? Available at https://www.linkedin.com/pulse/should-you-accept-stainless-steel-filter-screens-your-andersen/]Search in Google Scholar
[11. Bhushan, B., & Gupta, B.K. (1991). Handbook of tribology: Materials, coatings, and surface treatments. USA: McGraw-Hill.]Search in Google Scholar
[12. Cai, F. (2011). Tribological and electrochemical corrosion behaviours of titanium nitride and chromium nitride based PVD coating systems. PhD Thesis. Princeton: Princeton University. ISBN 9780494815458.]Search in Google Scholar
[13. Sharifinia, M., Bahmanbeigloo, Z.A., Keshavarzifard, M., Khanjani, M.H., & Lyons, B.P. (2020). Microplastic Pollution as a Grand Challenge in Marine Research: A Closer Look at their Adverse Impacts on the Immune and Reproductive Systems. Ecotoxicol. Environ. Saf., 204, 111109.10.1016/j.ecoenv.2020.11110932798751]Search in Google Scholar
[14. Transparency Market Research. (n.d.). High-Performance Anti-Corrosion Coatings Market. Available at https://www.transparencymarketresearch.com/high-performance-anticorrosion-coatings-market.html]Search in Google Scholar
[15. Méndez, C.M., Covinich, M.M., & Ares, A.E. (2013). Resistance to corrosion and passivity of 316L stainless steel directionally solidified samples. In M. Aliofkhazraei (Ed.), Developments in Corrosion Protection (pp. 41–63). ISBN 978-953-51-1223-5.]Search in Google Scholar
[16. Baronins, J., Podgursky, V., Antonov, M., Bereznev, S., & Hussainova, I. (2016). Electrochemical Behaviour of TiCN and TiAlN Gradient Coatings Prepared by Lateral Rotating Cathode Arc PVD Technology. Key Eng. Mater., 721, 414–418.10.4028/www.scientific.net/KEM.721.414]Search in Google Scholar
[17. Panjan, P., Čekada, M., Panjan, M., & Kek-Merl, D. (2009). Growth Defects in PVD Hard Coatings. Vacuum, 84, 209–214.10.1016/j.vacuum.2009.05.018]Search in Google Scholar
[18. Baronins, J., Antonov, M., Bereznev, S., Raadik, T., & Hussainova, I. (2018). Raman Spectroscopy for Reliability Assessment of Multilayered AlCrN Coating in Tribo-Corrosive Conditions. Coatings, 8 (7), 229.10.3390/coatings8070229]Search in Google Scholar
[19. Shishkin, A., Kozlov, V., Drozdova, M., Rulev, J., Mironov, V., & Hussainova, I. (2016). Low-density composite powder for lightweight parts made by means powder metallurgy. In Proceedings of the World PM2016; European Powder Metallurgy Association (EPMA) (pp. 93–94). 9–13 October 2016, Hamburg, Germany.]Search in Google Scholar
[20. Shishkin, A., Drozdova, M., Kozlov, V., Hussainova, I., & Lehmhus, D. (2017). Vibration-Assisted Sputter Coating of Cenospheres: A New Approach for Realizing Cu-Based Metal Matrix Syntactic Foams. Metals (Basel), 7, 16.10.3390/met7010016]Search in Google Scholar
[21. Shishkin, A., Hussainova, I., Kozlov, V., Lisnanskis, M., Leroy, P., & Lehmhus, D. (2018). Metal-Coated Cenospheres Obtained via Magnetron Sputter Coating: A New Precursor for Syntactic Foams. JOM, 70 (7), 1319–1325.10.1007/s11837-018-2886-0]Search in Google Scholar
[22. Hoche, H., Groß, S., & Oechsner, M. (2014). Development of New PVD Coatings for Magnesium Alloys with Improved Corrosion Properties. Surf. Coatings Technol., 259, 102–108.10.1016/j.surfcoat.2014.04.038]Search in Google Scholar
[23. Taha, M.A., El-Mahallawy, N.A., Hammouda, R.M., & Nassef, S.I. (2010). PVD Coating of Mg-AZ31 by Thin Layer of Al and Al-Si. J. Coatings Technol. Res., 7, 793–800.10.1007/s11998-010-9252-7]Search in Google Scholar
[24. Wang, C.,Wang, G., Feng, Z., Ji, X., Li, Q., Zhang, Z., & Song, D. (2011). Strengthen Water Conservancy Construction, Use Water Resources Scientifically, and Develop Modern Agriculture. Procedia Environ. Sci., 10, 1595–1600.10.1016/j.proenv.2011.09.253]Search in Google Scholar
[25. Williams, J. A. (1999). Wear Modelling: Analytical, Computational And Mapping: A Continuum Mechanics Approach. Wear, 225–229, 1–17.10.1016/S0043-1648(99)00060-5]Search in Google Scholar
[26. Merl, D.K., Panjan, P., Panjan, M., & Čekada, M. (2007). The Role of Surface Defects Density on Corrosion Resistance of PVD Hard Coatings. Plasma Process. Polym., 4, 613–617.10.1002/ppap.200731416]Search in Google Scholar
[27. Yang, M., Allen, A.J., Nguyen, M.T., Ralston, W.T., MacLeod, M.J., & DiSalvo, F.J. (2013). Corrosion Behavior of Mesoporous Transition Metal Nitrides. J. Solid State Chem., 205, 49–56.10.1016/j.jssc.2013.06.026]Search in Google Scholar
[28. Ibrahim, M.A.M., Korablov, S.F., & Yoshimura, M. (2002). Corrosion of Stainless Steel Coated with TiN, (TiAl)N and CrN in Aqueous Environments. Corros. Sci., 44, 815–828.10.1016/S0010-938X(01)00102-0]Search in Google Scholar
[29. Baronins, J., Antonov, M., Bereznev, S., Raadik, T., & Hussainova, I. (2019). Raman Spectroscopy of Multilayered AlCrN Coating under High Temperature Sliding/ Oxidation. Key Eng. Mater., 799, 9–14.10.4028/www.scientific.net/KEM.799.9]Search in Google Scholar
[30. William Grips, V.K., Barshilia, H.C., Selvi, V.E., & Rajam, K.S. (2006). Electrochemical Behavior of Single Layer CrN, TiN, TiAlN Coatings and Nanolayered TiAlN/CrN Multilayer Coatings Prepared by Reactive Direct Current Magnetron Sputtering. Thin Solid Films, 514, 204–211.10.1016/j.tsf.2006.03.008]Search in Google Scholar
[31. Urbahs, A., Savkovs, K., Urbaha, M., & Kurjanovičs, I. (2012). Nanostructured Intermetal-Ceramic Coatings for Blades of Gas Turbine Engines. Nanodevices and Nanomaterials for Ecological Security: NATO Science for Peace and Security Series B: Physics and Biophysics, 307–314. Dordrecht: Springer.10.1007/978-94-007-4119-5_28]Search in Google Scholar
[32. ASTM. (1997). ASTM G59 – 97e1 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements. ASTM International: West Conshohocken.]Search in Google Scholar
[33. Yoo, Y.H., Le, D.P., Kim, J.G., Kim, S.K., & Van Vinh, P. (2008). Corrosion Behavior of TiN, TiAlN, TiAlSiN Thin Films Deposited on Tool Steel in the 3.5 wt.% NaCl Solution. Thin Solid Films, 516, 3544–3548.10.1016/j.tsf.2007.08.069]Search in Google Scholar
[34. Liu, H.-N., Nomura, M., Ogi, K., & Sakamoto, M. (2001). Abrasion Resistance of High Cr Cast Irons at an Elevated Temperature. Wear, 250, 71–75.10.1016/S0043-1648(01)00665-2]Search in Google Scholar
[35. Subramanian, B., Thampi, A., Manivasagam, G., & Dhandapani, P. (2015). Influence of Needle-Like Morphology on the Bioactivity of Nanocrystalline Wollastonite – An in Vitro Study. Int. J. Nanomedicine, 107–118.10.2147/IJN.S79976]Search in Google Scholar
[36. Bowen, P., Highfield, J.G., Mocellin, A., & Ring, T.A. (1990). Degradation of Aluminum Nitride Powder in an Aqueous Environmet. J. Am. Ceram. Soc., 73, 724–728.10.1111/j.1151-2916.1990.tb06579.x]Search in Google Scholar
[37. Liu, C., Bi, Q., Leyland, A., & Matthews, A. (2003). An Electrochemical Impedance Spectroscopy Study of the Corrosion Behavior of PVD Coated Steels in 0.5 N NaCl Aqueous Solution: Part II. EIS Interpretation of Corrossion Behaviour. Corros. Sci., 45, 1257–1273.10.1016/S0010-938X(02)00214-7]Search in Google Scholar
[38. BOUKAMP, B. A (1986). Nonlinear Least Squares Fit Procedure for Analysis of Immittance Data of Electrochemical Systems. Solid State Ionics, 20, 31–44.10.1016/0167-2738(86)90031-7]Search in Google Scholar