<abstract xmlns="http://www.w3.org/1999/xhtml"><p>A project called AntArr as a new application of the DBBC3 (Digital Base Band Converter, 3rd generation) is under development. A group of antennas operating at low frequency, in the range from 10 MHz up to 1500 MHz, are phased up for VLBI, pulsar and more recently for FRB observations. Part of the scientific programme is also dedicated to SETI activities in piggy-back mode. Dedicated elements can even be added to reach still lower frequencies to observe the range down to kHz frequencies. The DBBC3 manages the array operations in a selected portion of the band and the main characteristic is to synthesize a beam with an innovative approach. The final product of the array is a single station standard VLBI data stream for correlation with other antennas, or a synthesized beam for single dish observations. A number of antennas and array prototypes are under test at a location on the Etna volcano slope, with the aim to form a complete radio telescope of up to 1024 elements in 2020 and beyond. This project completes the lower part of the frequency spectrum covered in VLBI by the BRAND EVN project. The project AntArr is hosted and financed by HAT-Lab Ltd., which is the manufacturer of the DBBC family backends.</p></abstract>

A project called AntArr as a new application of the DBBC3 (Digital Base Band Converter, 3rd generation) is under development. A group of antennas operating at low frequency, in the range from 10 MHz up to 1500 MHz, are phased up for VLBI, pulsar and more recently for FRB observations. Part of the scientific programme is also dedicated to SETI activities in piggy-back mode. Dedicated elements can even be added to reach still lower frequencies to observe the range down to kHz frequencies. The DBBC3 manages the array operations in a selected portion of the band and the main characteristic is to synthesize a beam with an innovative approach. The final product of the array is a single station standard VLBI data stream for correlation with other antennas, or a synthesized beam for single dish observations. A number of antennas and array prototypes are under test at a location on the Etna volcano slope, with the aim to form a complete radio telescope of up to 1024 elements in 2020 and beyond. This project completes the lower part of the frequency spectrum covered in VLBI by the BRAND EVN project. The project AntArr is hosted and financed by HAT-Lab Ltd., which is the manufacturer of the DBBC family backends.

AntArr – Etna Low Frequency Antenna Array

Latvian Journal of Physics and Technical Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

{"article-title":"AntArr \u2013 Etna Low Frequency Antenna Array"}

A project called AntArr as a new application of the DBBC3 (Digital Base Band Converter, 3rd generation) is under development. A group of antennas operating at...

AntArr – Etna Low Frequency Antenna Array

Data publikacji: 11 maj 2020

Zakres stron: 6 - 12

DOI: https://doi.org/10.2478/lpts-2020-0001

Słowa kluczowe
Antenna array, BRAND EVN, DBBC backend, VLBI

© 2020 G. Tuccari et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

AntArr – Etna Low Frequency Antenna Array

Data publikacji: 11 maj 2020

Zakres stron: 6 - 12

DOI: https://doi.org/10.2478/lpts-2020-0001

Słowa kluczoweAntenna array, BRAND EVN, DBBC backend, VLBI

© 2020 G. Tuccari et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Słowa kluczowe
Antenna array, BRAND EVN, DBBC backend, VLBI