<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The Kushk-e-Bahram Manto-type Cu deposit is located in central Iran, within Eocene to Oligo–Miocene volcanic strata which occur in the central part of the Uremia-Dokhtar Magmatic Arc (UDMA). Propylitization, silicification, argillization and carbonatization are the main types of alteration to have affected the pyroclastic and volcanic rocks. There are high amounts of oxide minerals, including malachite, azurite, hematite, magnetite and goethite. Three types of primary FIs have been determined in the Kushk-e-Bahram deposit, namely; I: two-phase liquid-rich FIs (L+V), II: mono-phase liquid FIs, III: two-phase vapour-rich FIs which have been identified based on petrographical studies. Based on FI studies of co-existing quartz and calcite, homogenization temperatures (Th) must have been between 67 and 228°C, with an average of 158°C. Moreover, salinity is between 14.0–30.3 wt% NaCl, equivalent to a 19.6% average. Fluid density values vary from 0.8 to 1.1 gr/cm<sup>3</sup>. Based on FI data and related diagrams, the depth of their trapping was estimated to be &lt;200 m and ore formation occurred at pressures of &lt;50 bars. Consequently, mineralogy, host rock and FIs characteristics in the Kushk-e-Bahram deposit are similar to the Manto-type Cu deposits in Mesozoic-Cenozoic volcanic belts of Iran and South America.</p></abstract>

The Kushk-e-Bahram Manto-type Cu deposit is located in central Iran, within Eocene to Oligo–Miocene volcanic strata which occur in the central part of the Uremia-Dokhtar Magmatic Arc (UDMA). Propylitization, silicification, argillization and carbonatization are the main types of alteration to have affected the pyroclastic and volcanic rocks. There are high amounts of oxide minerals, including malachite, azurite, hematite, magnetite and goethite. Three types of primary FIs have been determined in the Kushk-e-Bahram deposit, namely; I: two-phase liquid-rich FIs (L+V), II: mono-phase liquid FIs, III: two-phase vapour-rich FIs which have been identified based on petrographical studies. Based on FI studies of co-existing quartz and calcite, homogenization temperatures (Th) must have been between 67 and 228°C, with an average of 158°C. Moreover, salinity is between 14.0–30.3 wt% NaCl, equivalent to a 19.6% average. Fluid density values vary from 0.8 to 1.1 gr/cm3. Based on FI data and related diagrams, the depth of their trapping was estimated to be <200 m and ore formation occurred at pressures of <50 bars. Consequently, mineralogy, host rock and FIs characteristics in the Kushk-e-Bahram deposit are similar to the Manto-type Cu deposits in Mesozoic-Cenozoic volcanic belts of Iran and South America.

Characteristics of fluid inclusions in the Cenozoic volcanic-hosted Kushk-e-Bahram Manto-type Cu deposit of central Iran

Department of Geology, North Tehran Branch

Department of Petroleum and Mining Engineering, South Tehran Branch

Department of Science and Research Branch

Geologos

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The Kushk-e-Bahram Manto-type Cu deposit is located in central Iran, within Eocene to Oligo–Miocene volcanic strata which occur in the central part of the...

Characteristics of fluid inclusions in the Cenozoic volcanic-hosted Kushk-e-Bahram Manto-type Cu deposit of central Iran

Data publikacji: 29 wrz 2020

Zakres stron: 127 - 137

Otrzymano: 17 lut 2020

Przyjęty: 05 cze 2020

DOI: https://doi.org/10.2478/logos-2020-0012

Słowa kluczowe
Fluid inclusion (FI), salinity, homogenization temperatures (Th), copper

© 2020 Marjan Jebeli et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Characteristics of fluid inclusions in the Cenozoic volcanic-hosted Kushk-e-Bahram Manto-type Cu deposit of central Iran

Data publikacji: 29 wrz 2020

Zakres stron: 127 - 137

Otrzymano: 17 lut 2020

Przyjęty: 05 cze 2020

DOI: https://doi.org/10.2478/logos-2020-0012

Słowa kluczoweFluid inclusion (FI), salinity, homogenization temperatures (Th), copper

© 2020 Marjan Jebeli et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
Fluid inclusion (FI), salinity, homogenization temperatures (Th), copper