<abstract xmlns="http://www.w3.org/1999/xhtml"><p>Ni-based coatings can be successfully applied under abrasive and adhesive conditions as a substitute for environmentally harmful chrome coatings. The research has been carried out for thermally flame sprayed Ni-based coatings with remelting (so-called the two-step process) with the different chemical composition of starting powders. The structure of coatings was evaluated by optical and scanning electron microscopy. Both the three-body abrasive wear test, according to ASTM G65-4 (Dry-Sand Rubber Wheel Test) and dry sliding wear test by the Falex tester, were performed. The results show the influence of the effective chemical composition of the metal powders on improving the properties of the coating. The higher hardness of the coatings leads to a lower tendency for the creation of adhesive bonds, and as a result, leads to a lower tendency to scuffing. A similar trend shows the influence of higher coating hardness on the increasing of abrasive wear resistance.</p></abstract>

Ni-based coatings can be successfully applied under abrasive and adhesive conditions as a substitute for environmentally harmful chrome coatings. The research has been carried out for thermally flame sprayed Ni-based coatings with remelting (so-called the two-step process) with the different chemical composition of starting powders. The structure of coatings was evaluated by optical and scanning electron microscopy. Both the three-body abrasive wear test, according to ASTM G65-4 (Dry-Sand Rubber Wheel Test) and dry sliding wear test by the Falex tester, were performed. The results show the influence of the effective chemical composition of the metal powders on improving the properties of the coating. The higher hardness of the coatings leads to a lower tendency for the creation of adhesive bonds, and as a result, leads to a lower tendency to scuffing. A similar trend shows the influence of higher coating hardness on the increasing of abrasive wear resistance.

The corrosion-resistant Ni-based coatings and their tribological properties

KOM – Corrosion and Material Protection Journal

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"The corrosion-resistant Ni-based coatings and their tribological properties"}

Ni-based coatings can be successfully applied under abrasive and adhesive conditions as a substitute for environmentally harmful chrome coatings. The research...

The corrosion-resistant Ni-based coatings and their tribological properties

Data publikacji: 24 sie 2020

Zakres stron: 38 - 44

DOI: https://doi.org/10.2478/kom-2020-0006

© 2020 Zdravecká E. et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.