Logowanie
Zarejestruj się
Zresetuj hasło
Publikuj i Dystrybuuj
Rozwiązania Wydawnicze
Rozwiązania Dystrybucyjne
Dziedziny
Architektura i projektowanie
Bibliotekoznawstwo i bibliologia
Biznes i ekonomia
Chemia
Chemia przemysłowa
Filozofia
Fizyka
Historia
Informatyka
Inżynieria
Inżynieria materiałowa
Językoznawstwo i semiotyka
Kulturoznawstwo
Literatura
Matematyka
Medycyna
Muzyka
Nauki farmaceutyczne
Nauki klasyczne i starożytne studia bliskowschodnie
Nauki o Ziemi
Nauki o organizmach żywych
Nauki społeczne
Prawo
Sport i rekreacja
Studia judaistyczne
Sztuka
Teologia i religia
Zagadnienia ogólne
Publikacje
Czasopisma
Książki
Materiały konferencyjne
Wydawcy
Blog
Kontakt
Wyszukiwanie
EUR
USD
GBP
Polski
English
Deutsch
Polski
Español
Français
Italiano
Koszyk
Home
Czasopisma
Journal of Electrical Bioimpedance
Tom 15 (2024): Zeszyt 1 (January 2024)
Otwarty dostęp
Sensitivity study of a locally developed six electrode focused impedance method
Trilochan Khanal
Trilochan Khanal
oraz
K Siddique-e Rabbani
K Siddique-e Rabbani
| 24 kwi 2024
Journal of Electrical Bioimpedance
Tom 15 (2024): Zeszyt 1 (January 2024)
O artykule
Poprzedni artykuł
Następny artykuł
Abstrakt
Artykuł
Ilustracje i tabele
Referencje
Autorzy
Artykuły w tym zeszycie
Podgląd
PDF
Zacytuj
Udostępnij
Data publikacji:
24 kwi 2024
Zakres stron:
33 - 40
DOI:
https://doi.org/10.2478/joeb-2024-0005
Słowa kluczowe
Electrical bioimpedance
,
FIM
,
focused impedance
,
sensitivity study
,
indigenous technology
© 2024 Trilochan Khanal et al., published by Sciendo
This work is licensed under the Creative Commons Attribution 4.0 International License.
Figure 1:
Tetra-polar impedance measurement scheme [3].
Figure 2:
Basic concept of FIM-6 [3].
Figure 3:
Photograph of the phantom used in the study. Tap water of about 1cm height covers the base made with a cork sheet (foam plastic). The plastic pipe shown is an insulating object which was placed at different points to measure the sensitivity of the system.
Figure 4:
A laboratory set up for Phantom study.
Figure 5:
Placement of electrodes for FIM-6 phantom study.
Figure 6:
Positions for object placement for TPIM and FIM-6 phantom study.
Figure 7:
Transfer Impedance against distance for linear TPIM for the measurement along horizontal and vertical directions.
Figure 8:
Percentage change in Transfer Impedance against distance for linear TPIM along and perpendicular direction of electrode arrangement.
Figure 9:
Matrix Representations of Normalized Changes of Transfer Impedance for Linear TPIM.
Figure 10:
Focused Transfer Impedance against a distance measured along both horizontal and vertical directions.
Figure 11:
Percentage Change in FTZ against distance for Horizontal and vertical direction of measurement
Figure 12:
Matrix Representation of Normalized Values for FIM-6 arrangements measured along chosen positions.
Figure 13:
Percentage change in Impedance against distance for the Horizontal measurement of TPIM and FIM-6 configuration.
Figure 14:
Percentage change in Impedance against a distance measured for the perpendicular direction of the electrode arrangement of TPIM and FIM-6 configuration.