<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This article begins with an explanation of a frequency selective surface, also known as an FSS, which is used to increase gain across a wide frequency range. The proposed unit design is a modified combination of circular and square elements with two cross dipoles and a T-type structure at the inner side. In the second step of the process, a single wideband antenna that covers the same range as FSS is designed and then analyzed in terms of its gain and radiation patterns. After that, an antenna array was built using the same solo structure in order to take advantage of the benefits that come with using an array system. The array is made up of elements that are CPW fed. A ground-backed T-shaped power divider network with additional shorting pins is used to supply power to the entire array. In the fourth step, an array of the FSS unit cell has been positioned beneath the UWB solo antenna and its array in order to investigate the possibility of improved gain and radiation pattern. The FSS equivalent lumped circuit model is presented here for validation purposes. It has been determined that the results of the experiment and the simulation are consistent with one another. In contrast to the structures that have been reported in the past, the newly developed model possesses a greater bandwidth, a higher gain, and a lower profile.</p>
</abstract>

This article begins with an explanation of a frequency selective surface, also known as an FSS, which is used to increase gain across a wide frequency range. The proposed unit design is a modified combination of circular and square elements with two cross dipoles and a T-type structure at the inner side. In the second step of the process, a single wideband antenna that covers the same range as FSS is designed and then analyzed in terms of its gain and radiation patterns. After that, an antenna array was built using the same solo structure in order to take advantage of the benefits that come with using an array system. The array is made up of elements that are CPW fed. A ground-backed T-shaped power divider network with additional shorting pins is used to supply power to the entire array. In the fourth step, an array of the FSS unit cell has been positioned beneath the UWB solo antenna and its array in order to investigate the possibility of improved gain and radiation pattern. The FSS equivalent lumped circuit model is presented here for validation purposes. It has been determined that the results of the experiment and the simulation are consistent with one another. In contrast to the structures that have been reported in the past, the newly developed model possesses a greater bandwidth, a higher gain, and a lower profile.

Lightweight ultra-wideband antenna array equipped with thin frequency selective surface for high-gain applications

Department of Electronics and Communication Engineering

Journal of Electrical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This article begins with an explanation of a frequency selective surface, also known as an FSS, which is used to increase gain across a wide frequency range....

Lightweight ultra-wideband antenna array equipped with thin frequency selective surface for high-gain applications

Data publikacji: 24 gru 2022

Zakres stron: 396 - 404

Otrzymano: 14 wrz 2022

DOI: https://doi.org/10.2478/jee-2022-0054

Słowa kluczowe
ultra-wideband antenna array, X-band, Ku-band

© 2022 Pratyancha Prasad et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Lightweight ultra-wideband antenna array equipped with thin frequency selective surface for high-gain applications

Data publikacji: 24 gru 2022

Zakres stron: 396 - 404

Otrzymano: 14 wrz 2022

DOI: https://doi.org/10.2478/jee-2022-0054

Słowa kluczoweultra-wideband antenna array, X-band, Ku-band

© 2022 Pratyancha Prasad et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
ultra-wideband antenna array, X-band, Ku-band