<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Quantum-dot Cellular Automata (QCA) is a rival to complementary-metal-oxide-semiconductor (CMOS)-based technology and one of the most cutting-edge nano-scale technologies. The multiplexer is a fundamental component in the fields of nano communication and nano computation. The investigative item of this article is the QCA multiplexer, and a handful of the best multiplexers were chosen as samples for the current experiment. The QCA layouts were designed in the QCADesigner-2.0.3 simulation engine environment, and the best one was reported after successfully experimenting on a total of eight samples. The co-ordinate-based energy was estimated using QCADesigner-E (QDE), and the non-adiabatic energy waste was investigated using QCAPro. According to the coordinates-based technique, the overall energy waste of the best energy-saving QCA multiplexer is 5.90 meV, with an average energy loss per cycle of 0.537 meV. Another approach, QCAPro-based, was used to estimate the energy loss at three different levels of tunneling at a constant temperature, yielding an overall energy loss of approximately 12 to 15 meV for the energy-efficient multiplexers..</p>
</abstract>

Quantum-dot Cellular Automata (QCA) is a rival to complementary-metal-oxide-semiconductor (CMOS)-based technology and one of the most cutting-edge nano-scale technologies. The multiplexer is a fundamental component in the fields of nano communication and nano computation. The investigative item of this article is the QCA multiplexer, and a handful of the best multiplexers were chosen as samples for the current experiment. The QCA layouts were designed in the QCADesigner-2.0.3 simulation engine environment, and the best one was reported after successfully experimenting on a total of eight samples. The co-ordinate-based energy was estimated using QCADesigner-E (QDE), and the non-adiabatic energy waste was investigated using QCAPro. According to the coordinates-based technique, the overall energy waste of the best energy-saving QCA multiplexer is 5.90 meV, with an average energy loss per cycle of 0.537 meV. Another approach, QCAPro-based, was used to estimate the energy loss at three different levels of tunneling at a constant temperature, yielding an overall energy loss of approximately 12 to 15 meV for the energy-efficient multiplexers..

Energy estimation of QCA circuits: An investigation with multiplexers

Department of Electronics and Communication Engineering

Department of Electronics and Communication

Department of Electrical and Computer Engineering

Journal of Electrical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Energy estimation of QCA circuits: An investigation with multiplexers"}

Quantum-dot Cellular Automata (QCA) is a rival to complementary-metal-oxide-semiconductor (CMOS)-based technology and one of the most cutting-edge nano-scale...

Energy estimation of QCA circuits: An investigation with multiplexers

Data publikacji: 22 wrz 2022

Zakres stron: 276 - 283

Otrzymano: 06 sie 2022

DOI: https://doi.org/10.2478/jee-2022-0036

Słowa kluczowe
energy estimation, multiplexer, QCA circuits, QCADesigner, QCADesigner-E, QCAPro

© 2022 Angshuman Khan et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Energy estimation of QCA circuits: An investigation with multiplexers

Data publikacji: 22 wrz 2022

Zakres stron: 276 - 283

Otrzymano: 06 sie 2022

DOI: https://doi.org/10.2478/jee-2022-0036

Słowa kluczoweenergy estimation, multiplexer, QCA circuits, QCADesigner, QCADesigner-E, QCAPro

© 2022 Angshuman Khan et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
energy estimation, multiplexer, QCA circuits, QCADesigner, QCADesigner-E, QCAPro