[
[1] Y. Li, K. H. Ang, and G. Chong, “PID control system analysis and design: problems, remedies, and future directions”, IEEE Control Syst. Mag., vol. 26, no. 1, pp. 32–41, 2006.10.1109/MCS.2006.1580152
]Search in Google Scholar
[
[2] K. J. Åström and T. Hägglund, “Advanced PID Control”, ISA-The Instrumentation, Systems, and Automation Society, 2006.
]Search in Google Scholar
[
[3] Q. Wang, Z. Ye, W. Cai, and C. Hang, PID Control for Multivariable Processes. Berlin: Springer, 2008.
]Search in Google Scholar
[
[4] S. Skogestad, “Simple Analytic Rules for Model Reduction and PID Controller Tuning”, J. Process Control, vol. 13, no. 1, pp. 291–309, 2003.10.1016/S0959-1524(02)00062-8
]Search in Google Scholar
[
[5] A. S. Rao and M. Chidambaram, “Control of Unstable Processes with Two RHP Poles, a Zero and Time Delay”, Asia-Pac. J. Chem. Eng., vol. 1, no. 1–2, pp. 63–69, 2006.10.1002/apj.8
]Search in Google Scholar
[
[6] M. Shamsuzzoha and M. Lee, “Design of Advanced PID Controller for Enhanced Disturbance Rejection of Second-Order Processes with Time Delay”, AIChE J., vol. 54, no. 6, pp. 1526–1536, 2008.
]Search in Google Scholar
[
[7] J. E. Normey-Rico and E. F. Camacho, Control of Dead-time Processes, London, Springer-Verlag, 2007.
]Search in Google Scholar
[
[8] M. Veronesi and A. Visioli, “Simultaneous Closed-Loop Automatic Tuning Method for Cascade Controllers”, IET Control Theory Appl., vol. 5, no. 2, pp. 263–270, 2011.10.1049/iet-cta.2010.0082
]Search in Google Scholar
[
[9] A. Visioli, “Design and Tuning of a Ratio Controller”, Control Eng. Pract., vol. 13, no. 4, pp. 485–497, 2005.10.1016/j.conengprac.2004.04.010
]Search in Google Scholar
[
[10] M. Araki and H. Taguchi, “Two-Degree-of-Freedom PID Controllers”, Int. J. Control, vol. 1, no. 4, pp. 401–411, 2003.
]Search in Google Scholar
[
[11] J. Chen and T-C Huang, “Applying Neural Networks to On-Line Updated PID Controllers for Nonlinear Process Control”, J. Process Control, vol. 14, no. 2, pp. 211–230, 2004.10.1016/S0959-1524(03)00039-8
]Search in Google Scholar
[
[12] H. A. Malki, D. Misir, D. Feigenspan, and Guanrong Chen, “Fuzzy PID Control of a Flexible-Joint Robot Arm with Uncertainties from Time-Varying Loads”, IEEE Trans. Control Syst. Technol., vol. 5, no. 3, pp. 371–378, 1997.10.1109/87.572133
]Search in Google Scholar
[
[13] A. Visioli, Practical PID Control, London: Springer, 2006.
]Search in Google Scholar
[
[14] I. Podlubny, “Fractional-Order Systems and PI-lambda D-mu Controllers”, IEEE Transon Autom. Control, vol. 44, pp. 208-214, 1999.10.1109/9.739144
]Search in Google Scholar
[
[15] F. N. Deniz, A. Yüce, N. Tan, and D. P. Atherton, “Tuning of Fractional Order PID Controllers Based on Integral Performance Criteria Using Fourier Series Method”, IFAC-Pap., vol. 50, no. 1, pp. 8561–8566, 2017.
]Search in Google Scholar
[
[16] K-E Åarzén, “A Simple Event-Based PID Controller”, IFAC Proc. Vol., vol. 32, no. 2, pp. 8687–8692, 1999.
]Search in Google Scholar
[
[17] T. D. C. Thanh and K. K. Ahn, “Nonlinear PID Control to Improve the Control Performance of 2 Axes Pneumatic Artificial Muscle Manipulator using Neural Network”, Mechatronics, vol. 16, no. 9, pp. 577–587, 2006.10.1016/j.mechatronics.2006.03.011
]Search in Google Scholar
[
[18] G. Ablay, “Variable Structure Controllers for Unstable Processes”, J. Process Control, vol. 32, pp. 10–15, 2015.10.1016/j.jprocont.2015.04.017
]Search in Google Scholar
[
[19] A. A. Abdelrauf, M. Abdel-Geliel, and E. Zakzouk, “Adaptive PID Controller Based on Model Predictive Control”, in 2016 European Control Conference (ECC), June 2016, pp. 746–751.10.1109/ECC.2016.7810378
]Search in Google Scholar
[
[20] S. Manabe and Y. C. Kim, “Recent Development of Coefficient Diagram Method”, Shanghai, China, 2000.
]Search in Google Scholar
[
[21] S. E. Hamamci and A. Ucar, “A Robust Model-Based Control for Uncertain Systems”, Trans. Inst. Meas. Control, vol. 24, no. 5, pp. 431–445, 2002.10.1191/0142331202tm065oa
]Search in Google Scholar
[
[22] Y-B Kang, H. Rho, and H. Kim, “A New Approach for Transient Response Control via Characteristic Ratio Assignment Method”, Int. J. Control Autom. Syst., vol. 9, no. 4, p. 659, 2011.10.1007/s12555-011-0406-x
]Search in Google Scholar
[
[23] M. Tabatabaei, “Generalized Characteristic Ratios: Definition, Assignment, and Application”, IETE J. Res., vol. 66, no. 4, pp. 466–477, 2020.10.1080/03772063.2018.1498030
]Search in Google Scholar
[
[24] Y. C. Kim, L. H. Keel, and S. P. Bhattachayya, “Transient Response Control via Characteristic Ratio Assignment”, IEEE Trans Autom. Control, vol. 48, no. 12, pp. 2238–2244, 2003.
]Search in Google Scholar
[
[25] M. Haeri and M. S. Tavazoei, “CDM-Based Closed-Loop Transfer Function Design for Ramp Input”, Trans. Inst. Meas. Control, vol. 33, no. 5, pp. 558–572, 2011.10.1177/0142331210377098
]Search in Google Scholar
[
[26] O. Ocal, A. Bir, and B. Tibken, “Digital Design of Coefficient Diagram Method”, in Proceedings of the IEEE American Control Conference, St. Louis MO, USA, 2009, pp. 2849–2854.10.1109/ACC.2009.5160040
]Search in Google Scholar
[
[27] G. Ablay, “Coefficient Ratios-Based Robust Sliding Surface and Integral Sliding Mode Control Designs with Optimal Transient Responses”, IET Control Theory Appl., vol. 8, no. 17, pp. 1896–1904, 2014.
]Search in Google Scholar
[
[28] C. T. Chen, Linear System Theory and Design, New York: Oxford University Press, 1999.
]Search in Google Scholar
[
[29] A. Williams and F. Taylor, Electronic Filter Design Handbook, Fourth Edition, McGraw Hill Professional, 2010.
]Search in Google Scholar
[
[30] S. Manabe, “Unified Interpretation of Classical, Optimal, and Hinf Control”, J. SICE, vol. 30, no. 10, pp. 941–946, 1991.
]Search in Google Scholar
[
[31] M. Ben Hariz, F. Bouani, and M. Ksouri, “Robust Controller for Uncertain Parameters Systems”, ISA Trans., vol. 51, no. 5, pp. 632–640, 2012.10.1016/j.isatra.2012.04.007
]Search in Google Scholar
[
[32] D. C. Youla, J. J. Bongiorno, and C. N. Lu, “Single-Loop Feedback- Stabilization of Linear Multivariable Dynamical Plants”, Automatica, vol. 10, no. 2, pp. 159–173, 1974.10.1016/0005-1098(74)90021-1
]Search in Google Scholar
[
[33] A. V. Lipatov and N. I. Sokolov, “Some Sufficient Conditions for Stability and Instability of Continuous Linear Stationary Systems”, Autom. Contr, vol. 39, pp. 1285–1291, 1979.
]Search in Google Scholar
[
[34] N. K. Bose, E. I. Jury, and E. Zeheb, “On Robust Hurwitz and Schur Polynomials”, IEEE Trans. Autom. Control, vol. 33, no. 12, pp. 1166–1168, 1988.
]Search in Google Scholar
[
[35] J. C. Lagarias, J. A. Reeds, M. H. Wright, and P. E. Wright, “Convergence Properties of the Nelder-Mead Simplex Method in Low Dimensions”, SIAM J. Optim., vol. 9, pp. 112–147, 1998.10.1137/S1052623496303470
]Search in Google Scholar
[
[36] F. G. Martins, “Tuning PID Controllers using the ITAE Criterion”, Int J. Eng. Educ., vol. 21, no. 5, pp. 867–873, 2005.
]Search in Google Scholar
[
[37] A. Tonoli, A. Bonfitto, M. Chiaberge, M. Silvagni, L. D. Suarez, and E. Zenerino, “Feedforward and Modal Control for a Multi Degree of Freedom High PrecisionMachine”, in Smart Actuation and Sensing Systems – Recent Advances and Future Challenges, Croatia: InTech, 2012, pp. 513–546.10.5772/52213
]Search in Google Scholar
[
[38] P. Cortés-Antonio, F. Valdez, O. Castillo, and P. Melin, “Towards Tracking Trajectory of Planar Quadrotor Models”, in Intuitionistic and Type-2 Fuzzy Logic Enhancements in Neural and Optimization Algorithms: Theory and Applications, Springer International Publishing, 2020, pp. 313–323.10.1007/978-3-030-35445-9_24
]Search in Google Scholar
