<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Recently, the reinforced cement concrete (RCC) frame has been one of the most commonly used structural systems for buildings in the high seismic region due to its inherent earthquake-resistant property. However, there is still a deficiency in understanding the RCC building structural system dynamic behaviour during significant earthquakes. A 1/4th scaled RCC framed building structure has been tested on the shake table in the present study. The response in terms of engineering parameters like natural time period, damping, story acceleration, and damage pattern have been reported. The 1940 EL-Centro (NS component) time history has been used for the study. The failure patterns were observed within the column-beam joints. The difference between the input signal and the output signal has been noted and found to be in good agreement with each other.</p>
</abstract>

Recently, the reinforced cement concrete (RCC) frame has been one of the most commonly used structural systems for buildings in the high seismic region due to its inherent earthquake-resistant property. However, there is still a deficiency in understanding the RCC building structural system dynamic behaviour during significant earthquakes. A 1/4th scaled RCC framed building structure has been tested on the shake table in the present study. The response in terms of engineering parameters like natural time period, damping, story acceleration, and damage pattern have been reported. The 1940 EL-Centro (NS component) time history has been used for the study. The failure patterns were observed within the column-beam joints. The difference between the input signal and the output signal has been noted and found to be in good agreement with each other.

Seismic Analysis of Reinforced Concrete Frame Using Shake Table Test

Journal of Applied Engineering Sciences

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Seismic Analysis of Reinforced Concrete Frame Using Shake Table Test"}

Recently, the reinforced cement concrete (RCC) frame has been one of the most commonly used structural systems for buildings in the high seismic region due to...

Seismic Analysis of Reinforced Concrete Frame Using Shake Table Test

Data publikacji: 14 maj 2023

Zakres stron: 23 - 26

Otrzymano: 16 gru 2022

Przyjęty: 26 sty 2023

DOI: https://doi.org/10.2478/jaes-2023-0004

Słowa kluczowe
Seismic Analysis, Framed Structures, Shake Table, EL-Centro Earthquake, Column-beam Joint

© 2023 M. Arastu et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Seismic Analysis of Reinforced Concrete Frame Using Shake Table Test

Data publikacji: 14 maj 2023

Zakres stron: 23 - 26

Otrzymano: 16 gru 2022

Przyjęty: 26 sty 2023

DOI: https://doi.org/10.2478/jaes-2023-0004

Słowa kluczoweSeismic Analysis, Framed Structures, Shake Table, EL-Centro Earthquake, Column-beam Joint

© 2023 M. Arastu et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
Seismic Analysis, Framed Structures, Shake Table, EL-Centro Earthquake, Column-beam Joint