<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In this article, the author describes the problem with low frequency vibrations in the range of 0–100 Hz and how exposure to these vibrations could affect human health when working in dangerous environments. For this research, vibrations in the range of 0–30 Hz were studied as this frequency range has the largest impact on human health and such vibrations usually occur when operating excavators, forklifts or Melex vehicles. Workers who are exposed to these vibrations usually work in a seated position for many hours. Over time, exposure to dangerous vibrations in the working environment will cause damage to the human spine, resulting in a great deal of discomfort for the worker. In order to alleviate the pain, the worker will tend to shift their seating position away from the correct position, which further compounds the issue. The author proposes the use of a 3D knitted seat mat in order to reduce the amplitude of any harmful vibrations. This will provide better ergonomic conditions for the user and will reduce the effects of low frequency vibrations.</p>
</abstract>

In this article, the author describes the problem with low frequency vibrations in the range of 0–100 Hz and how exposure to these vibrations could affect human health when working in dangerous environments. For this research, vibrations in the range of 0–30 Hz were studied as this frequency range has the largest impact on human health and such vibrations usually occur when operating excavators, forklifts or Melex vehicles. Workers who are exposed to these vibrations usually work in a seated position for many hours. Over time, exposure to dangerous vibrations in the working environment will cause damage to the human spine, resulting in a great deal of discomfort for the worker. In order to alleviate the pain, the worker will tend to shift their seating position away from the correct position, which further compounds the issue. The author proposes the use of a 3D knitted seat mat in order to reduce the amplitude of any harmful vibrations. This will provide better ergonomic conditions for the user and will reduce the effects of low frequency vibrations.

Design and Testing of 3D Textile Materials with Vibro-Insulating Properties, Applicable in the Construction of Vibroisolating Seats for Machine and Device Operators

Technical University of Lodz Faculty of Material Technology and Textile Design

Department of Knitting Technology and Textile Machines

Fibres & Textiles in Eastern Europe

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

In this article, the author describes the problem with low frequency vibrations in the range of 0–100 Hz and how exposure to these vibrations could affect...

Design and Testing of 3D Textile Materials with Vibro-Insulating Properties, Applicable in the Construction of Vibroisolating Seats for Machine and Device Operators

Article Category: Research Article

Data publikacji: 06 sie 2024

Zakres stron: 57 - 68

DOI: https://doi.org/10.2478/ftee-2024-0020

Słowa kluczowe
vibroisolation, measurement, spacer materials, OHS, seats

© 2024 Michal Frydrysiak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Design and Testing of 3D Textile Materials with Vibro-Insulating Properties, Applicable in the Construction of Vibroisolating Seats for Machine and Device Operators

Article Category: Research Article

Data publikacji: 06 sie 2024

Zakres stron: 57 - 68

DOI: https://doi.org/10.2478/ftee-2024-0020

Słowa kluczowevibroisolation, measurement, spacer materials, OHS, seats

© 2024 Michal Frydrysiak et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
vibroisolation, measurement, spacer materials, OHS, seats