Zacytuj

Fig. 1

Alambeta device of the Sensora company, Czech Republic
Alambeta device of the Sensora company, Czech Republic

Fig. 2

Setup for measurement and evaluation of thermodynamic parameters in a system simulating a real human body - material/textile system
Setup for measurement and evaluation of thermodynamic parameters in a system simulating a real human body - material/textile system

Fig. 3

Average values of air permeability of fabrics tested
Average values of air permeability of fabrics tested

Fig. 4

Average values of tear strength of fabrics tested
Average values of tear strength of fabrics tested

Fig. 5

Average values of water vapour resistance of fabrics tested
Average values of water vapour resistance of fabrics tested

Fig. 6

Abrasion resistance of fabrics tested
Abrasion resistance of fabrics tested

Figure 7

Thermal conductivity of fabrics tested
Thermal conductivity of fabrics tested

Fig. 8

Thermal resistance of fabrics tested
Thermal resistance of fabrics tested

Fig. 9

Thickness of fabrics tested
Thickness of fabrics tested

Fig. 10

Medium power density
Medium power density

Fig. 11

Average underclothing humidity
Average underclothing humidity

Fig. 12

Ergonomics taken into account in the construction by modeling and shaping the convexity. a) jacket, b) trousers
Ergonomics taken into account in the construction by modeling and shaping the convexity. a) jacket, b) trousers

Fabric characteristics

Fabric marking Raw materials composition % Weave Surface mass g×m−2
1 PES 65/CO35 twill 2/1 S 243
2 PES 65/CO35 twill 2/1 S 204
3 CO 100 twill 3/1 S 276
4 PES 65/CO35 twill 3/1 Z 228
5 CO 100 plain 183
6 PES 65/CO35 twill 2/1 S 175