<abstract xmlns="http://www.w3.org/1999/xhtml"><p> This paper describes a simple device, consisting of a collection of glass capillary tubes, which can be used as a stable, pressure insensitive standard for calibrating pressure drop machines. For air flowing through a single capillary tube of the proper dimensions to give a pressure drop similar to that of a filter rod, the Reynolds number is about 2000, the boundary between laminar and turbulent flow. Since turbulent flow gives pressure drops which vary with atmospheric pressure, it is desirable to reduce this quantity to a level where laminar flow is always present. This can be accomplished by distributing the flow among 10 parallel capillaries of very small diameter. The capillaries were formed by drawing pyrex tubing on a Hupe glass drawing machine to a finished internaI diameter of .44 mm. Ten Iengths of this capillary were mounted in 8 mm tubing and were encased in a clear resin. After polymerization of the resin, the composite rod was sawed into appropriate lengths and cleaned in an ultrasonic bath. Microscopic examination of the finished tubes showed that each capillary was a clean, smooth-walled tube with a sharp entrance and exit. Calculation of the Reynolds number for the composite capillary gave a value of 314, which is well within the Iaminar flow region. The agreement between measured pressure drops of these standards and those calculated using Poiseuille's Iaw with an entry and exit correction is excellent. Daily measurements of the pressure drop of these standard tubes for a period of a month were conducted, and the random variability was found to be 1 % or Iess. Measurements of the pressure drop of these tubes at various pressures and temperatures covering the range of normaI laboratory conditions also demonstrated a lack of significant variability. Fouling of the tubes from atmospheric dust was not found to be a significant factor</p></abstract>

This paper describes a simple device, consisting of a collection of glass capillary tubes, which can be used as a stable, pressure insensitive standard for calibrating pressure drop machines. For air flowing through a single capillary tube of the proper dimensions to give a pressure drop similar to that of a filter rod, the Reynolds number is about 2000, the boundary between laminar and turbulent flow. Since turbulent flow gives pressure drops which vary with atmospheric pressure, it is desirable to reduce this quantity to a level where laminar flow is always present. This can be accomplished by distributing the flow among 10 parallel capillaries of very small diameter. The capillaries were formed by drawing pyrex tubing on a Hupe glass drawing machine to a finished internaI diameter of .44 mm. Ten Iengths of this capillary were mounted in 8 mm tubing and were encased in a clear resin. After polymerization of the resin, the composite rod was sawed into appropriate lengths and cleaned in an ultrasonic bath. Microscopic examination of the finished tubes showed that each capillary was a clean, smooth-walled tube with a sharp entrance and exit. Calculation of the Reynolds number for the composite capillary gave a value of 314, which is well within the Iaminar flow region. The agreement between measured pressure drops of these standards and those calculated using Poiseuille's Iaw with an entry and exit correction is excellent. Daily measurements of the pressure drop of these standard tubes for a period of a month were conducted, and the random variability was found to be 1 % or Iess. Measurements of the pressure drop of these tubes at various pressures and temperatures covering the range of normaI laboratory conditions also demonstrated a lack of significant variability. Fouling of the tubes from atmospheric dust was not found to be a significant factor

Multiple Capillary Pressure Drop Standards

Celanese Fibers Company, Charlotte, North Carolina, USA

Contributions to Tobacco & Nicotine Research

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

{"article-title":"Multiple Capillary Pressure Drop Standards"}

This paper describes a simple device, consisting of a collection of glass capillary tubes, which can be used as a stable, pressure insensitive standard for...

Multiple Capillary Pressure Drop Standards

Data publikacji: 14 sie 2014

Zakres stron: 60 - 64

DOI: https://doi.org/10.2478/cttr-2013-0356

© Beiträge zur Tabakforschung International

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.