[Beune, A., Kuerten, J.G.M., van Heumen, M.P.C., 2012. CFD analysis with fluid–structure interaction of opening high-pressure safety valves, Computers & Fluids 64, 108-116, DOI:10.1016/j.compfluid.2012.05.010.10.1016/j.compfluid.2012.05.010]Open DOISearch in Google Scholar
[Bjerre, M., Eriksen, J.G.I., Andreasen, A., Stegelmann, C., Mando, M., 2017. Analysis of Pressure Safety Valves for fire protection on offshore oil and gas installations, Process Safety and Env. Protection 105, 60-68, DOI: 10.1016/j.psep.2016.10.008.10.1016/j.psep.2016.10.008]Open DOISearch in Google Scholar
[Dempster, W., Alshaikh, M., 2015. An Investigation of the Two Phase Flow and Force Characteristics of a Safety Valve, Procedia Engineering 130, 77-86, DOI: 10.1016/j.proeng.2015.12.177.10.1016/j.proeng.2015.12.177]Open DOISearch in Google Scholar
[Dossena, V., Franchina, N., Savini, M., Marinoni, F., Cecchi, F., Bassi, F., 2017. Reynolds number effects on the performance of safety valves operating with incompressible flows, Journal of Loss Prevention in the Process Industries 49, 525-535, DOI: 10.1016/j.jlp.2017.05.020.10.1016/j.jlp.2017.05.020]Open DOISearch in Google Scholar
[Dossena, V., Marinoni, F., Bassi, F., Franchina, N., Savini, M., 2013. Numerical and experimental investigation on the performance of safety valves operating with different gases, International Journal of Pressure Vessels and Piping 104, 21-29, DOI: 10.1016/j.ijpvp.2013.01.002.10.1016/j.ijpvp.2013.01.002]Open DOISearch in Google Scholar
[Gadek-Moszczak, A., Radek, N., Wronski, S., Tarasiuk, J., 2014. Application the 3D image analysis techniques for assessment the quality of material surface layer before and after laser treatment. Adv. Mat. Res. Switz., 874, 133-138. DOI: 10.4028/www.scientific.net/AMR.874.13310.4028/www.scientific.net/AMR.874.133]Open DOISearch in Google Scholar
[Galbally, D., Garcia, G., Hernando, J., de Dios Sanchez, J., 2015. Analysis of pressure oscillations and safety relief valve vibrations in the main steam system of a Boiling Water Reactor, Nuclear Engineering and Design 293, 258–271, DOI: 10.1016/j.nucengdes.2015.08.005.10.1016/j.nucengdes.2015.08.005]Open DOISearch in Google Scholar
[Karpisz, D., Kielbus, A., 2019. The Revitalization of Radar System as a Case of Functional and Information Security Problems. System Safety: Human - Technical Facility – Environment, 1, 692-699. DOI: 10.2478/czoto-2019-008810.2478/czoto-2019-0088]Open DOISearch in Google Scholar
[Kozien, E., 2017. Identification of stage phase growth in the checklist method using different statistical parameters. 20th Int. Sci. Conf. Economic and Social Development, Prague, Varazdin, 538-545.]Search in Google Scholar
[Kozien, E., Kozien, A., 2017. Commercialization of scientific research results and transfer knowledge and technologies to economy as determinants of development of universities and enterprises in Poland - legal and economic perspective. 26th Int. Sci. Conf. Economic and Social Development, Zagreb, Varazdin, 326-335.]Search in Google Scholar
[Krawczyk, J., Sobczyk, A., Stryczek, J., Walczak, P., 2018. Tests of New Methods of Manufacturing Elements for Water Hydraulics. Materials Research Proceedings, 5, 200-205. DOI: 10.21741/9781945291814-3510.21741/9781945291814-35]Open DOISearch in Google Scholar
[Lisowski E., Filo G., 2016. CFD analysis of the characteristics of a proportional flow control valve with an innovative opening shape, Energy Conversion and Management 123, 15-28, doi:10.1016/j.enconman.2016.06.025.10.1016/j.enconman.2016.06.025]Open DOISearch in Google Scholar
[Lisowski, E., Filo, G., 2017. Analysis of a proportional control valve flow coefficient with the usage of a CFD method, Flow Measurement and Instrumentation 53, 269–278, DOI: 10.1016/j.flowmeasinst.2016.12.009.10.1016/j.flowmeasinst.2016.12.009]Open DOISearch in Google Scholar
[Manimaran, A., Hiremath, S.S., Shekhar, P., 2016. Dynamic Simulation and Validation of a Vent and Safety Valve for Cryogenic Flight Tanks, Procedia Technology 25, 1320-1334, DOI:10.1016/j.protcy.2016.08.232.10.1016/j.protcy.2016.08.232]Open DOISearch in Google Scholar
[Miller, C., Bredemyer, L., 2007. Innovative safety valve selection techniques and data, Journal of Hazardous Materials 142, 685-688, doi: 10.1016/j.jhazmat.2006.06.072.10.1016/j.jhazmat.2006.06.07217011117]Open DOISearch in Google Scholar
[Moncalvo, D., Friedel, L., 2010. A viscosity correction factor for shear-thinning liquid flows in safety valves, Journal of Loss Prevention in the Process Industries 23, 289-293, DOI: 10.1016/j.jlp.2009.10.008.10.1016/j.jlp.2009.10.008]Open DOISearch in Google Scholar
[Osocha, P., 2018. Calculation of Residual Life for P91 Material Based on Creep Rate and Time to Rupture. Materials Research Proceedings, 5, 177-182. DOI: 10.21741/9781945291814-3110.21741/9781945291814-31]Open DOISearch in Google Scholar
[Pietraszek, J., Kolomycki, M., Szczotok, A., Dwornicka, R., 2016. The fuzzy approach to assessment of ANOVA results. ICCCI 2016: Conf. Comp. Collective Intell. Springer, 260-268. DOI: 10.1007/978-3-319-45243-2_2410.1007/978-3-319-45243-2_24]Open DOISearch in Google Scholar
[Pliszka, I., Radek, N., Gadek-Moszczak, A., Fabian, P., Paraska, O., 2018. Surface Improvement by WC-Cu Electro-Spark Coatings with Laser Modification. Materials Research Proceedings, 5, 237-242. DOI: 10.21741/9781945291814-4210.21741/9781945291814-42]Open DOISearch in Google Scholar
[Radek, N., Pasieczynski, L., Makrenek, M., Dudek, A., 2018. Mechanical Properties of Anti-Graffiti Coating Systems used in the Railway Industry. Materials Research Proceedings, 5, 243-247. DOI: 10.21741/9781945291814-4310.21741/9781945291814-43]Open DOISearch in Google Scholar
[Scuro, N.L., Angelo, E., Angelo, G., Andrade, D.A., 2018. A CFD analysis of the flow dynamics of a directly-operated safety relief valve, Nuclear Engineering and Design 328, 321-332, DOI: 10.1016/j.nucengdes.2018.01.024.10.1016/j.nucengdes.2018.01.024]Open DOISearch in Google Scholar
[Skrzypczak-Pietraszek, E., Reiss, K., Zmudzki, P., Pietraszek, J., 2018. Enhanced accumulation of harpagide and 8-O-acetyl-harpagide in Melittis melissophyllum L. agitated shoot cultures analyzed by UPLC-MS/MS. PLoS ONE 2018, 13, art. e0202556. DOI: 10.1371/journal.pone.020255610.1371/journal.pone.020255610.1371/journal.pone.0202556]Search in Google Scholar
[Song, X.G., Wang, L.T., Park, Y.C., Sun, W., 2015. A Fluid-Structure Interaction Analysis of the Spring-Loaded Pressure Safety Valve during Popping Off, Procedia Engineering 130, 87-94, DOI: 10.1016/j.proeng.2015.12.178.10.1016/j.proeng.2015.12.178]Open DOISearch in Google Scholar
[Szczotok, A., Radek, N., Dwornicka, R., 2018. Effect of the induction hardening on microstructures of the selected steels. METAL 2018: 27th Int. Conf. Metallurgy and Materials. Ostrava, Tanger, 1264-1269.]Search in Google Scholar
[Ulewicz, R., Selejdak, R., 2018. Impact of Laser Machining on the Structure and Properties of Tool Steels. Materials Research Proceeding, 5, 37-40. DOI: DOI: 10.21741/9781945291814-710.21741/9781945291814-7]Open DOISearch in Google Scholar