<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>A Blast loading history can be represented by the peak pressure value and the impulse. Combinations of pressure and impulse of various blast loading scenarios can be collected to draw a pressure-impulse (P-I) curve that corresponds to a level of damage of a blast-resistant structural component. The P-I curve is typically used for a preliminary design or assessment of blast resistance structural components. Generating a P I curve for a given structural component and level of protection requires repeatedly ru nning a single degree of freedom system (SDOF) model, which can be tedious for early design stages. Hence, a simplified approach (i.e., the normalization approach) was utilized to promptly generate the P- I curve for insulated precast concrete wall panels, which relies on shifting a control P I curve using normalization factors. The generated P-I curves using the normalization approach are validated with the traditional SDOF approach curves; 95% of the examined insulted panel configurations have an error between +/-7%. As a result of the reached low error percentages, a spreadsheet- design tool was developed using this approach. The tool can further enable rapid evaluation of the performance of insulated precast concrete panels under blast loading during the preliminary design phase.</p>
</abstract>

A Blast loading history can be represented by the peak pressure value and the impulse. Combinations of pressure and impulse of various blast loading scenarios can be collected to draw a pressure-impulse (P-I) curve that corresponds to a level of damage of a blast-resistant structural component. The P-I curve is typically used for a preliminary design or assessment of blast resistance structural components. Generating a P I curve for a given structural component and level of protection requires repeatedly ru nning a single degree of freedom system (SDOF) model, which can be tedious for early design stages. Hence, a simplified approach (i.e., the normalization approach) was utilized to promptly generate the P- I curve for insulated precast concrete wall panels, which relies on shifting a control P I curve using normalization factors. The generated P-I curves using the normalization approach are validated with the traditional SDOF approach curves; 95% of the examined insulted panel configurations have an error between +/-7%. As a result of the reached low error percentages, a spreadsheet- design tool was developed using this approach. The tool can further enable rapid evaluation of the performance of insulated precast concrete panels under blast loading during the preliminary design phase.

Assessment of a Simplified Methodology for Preliminary Blast-Resistant Design of Insulated Precast Concrete Wall Panels

Department of Civil Engineering, College of Engineering

Civil and Environmental Engineering

This work is licensed under the Creative Commons Attribution 4.0 International License.

A Blast loading history can be represented by the peak pressure value and the impulse. Combinations of pressure and impulse of various blast loading scenarios...

Assessment of a Simplified Methodology for Preliminary Blast-Resistant Design of Insulated Precast Concrete Wall Panels

Data publikacji: 26 cze 2024

Zakres stron: 41 - 53

DOI: https://doi.org/10.2478/cee-2024-0004

Słowa kluczowe
Precast concrete, Insulated panels, Blast design, P-I curves, Design tool

© 2024 Omar M. Alawad, published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Assessment of a Simplified Methodology for Preliminary Blast-Resistant Design of Insulated Precast Concrete Wall Panels

Data publikacji: 26 cze 2024

Zakres stron: 41 - 53

DOI: https://doi.org/10.2478/cee-2024-0004

Słowa kluczowePrecast concrete, Insulated panels, Blast design, P-I curves, Design tool

© 2024 Omar M. Alawad, published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Słowa kluczowe
Precast concrete, Insulated panels, Blast design, P-I curves, Design tool