<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The hollow structural elements occupy a great deal of researchers’ interest due to the possibility of losing their weights and maintaining or developing their resistances especially when increasing both compressive and tensile strength of modern materials. The flexural strength based on the forces balance and stain compatibility was derived. Nine beams of Ultra High Performance concrete (UHPC) and conventional reinforced steel bars were casted. Several parameters were taken which are the thickness of the concrete top flange, thickness of the concrete bottom flange, depth of the longitudinal hollow and the ratio of the longitudinal reinforcing steel. By comp aring the practical and theoretical results, the proposed flexural strength provided a safety factor of one-fifth against the experimental collected data. The ultimate flexural force developed up 260 % when increasing the reinforced steel area 4.6 times and 230 % comparing with the solid beam. Many aspect ratios were also mentioned that keep the strength in developing.</p>
</abstract>

The hollow structural elements occupy a great deal of researchers’ interest due to the possibility of losing their weights and maintaining or developing their resistances especially when increasing both compressive and tensile strength of modern materials. The flexural strength based on the forces balance and stain compatibility was derived. Nine beams of Ultra High Performance concrete (UHPC) and conventional reinforced steel bars were casted. Several parameters were taken which are the thickness of the concrete top flange, thickness of the concrete bottom flange, depth of the longitudinal hollow and the ratio of the longitudinal reinforcing steel. By comp aring the practical and theoretical results, the proposed flexural strength provided a safety factor of one-fifth against the experimental collected data. The ultimate flexural force developed up 260 % when increasing the reinforced steel area 4.6 times and 230 % comparing with the solid beam. Many aspect ratios were also mentioned that keep the strength in developing.

Flexural Strength Estimation for Hollow Cross-Section Simply Supported UHPC Beams

Civil and Environmental Engineering

This work is licensed under the Creative Commons Attribution 4.0 International License.

The hollow structural elements occupy a great deal of researchers’ interest due to the possibility of losing their weights and maintaining or developing their...

Flexural Strength Estimation for Hollow Cross-Section Simply Supported UHPC Beams

Data publikacji: 09 gru 2021

Zakres stron: 476 - 484

DOI: https://doi.org/10.2478/cee-2021-0050

Słowa kluczowe
Hollow cross-section, Flexural strength, Strain compatibility, Concrete flange, UHPC

© 2021 Nasser Hakeem Tu’ma et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Flexural Strength Estimation for Hollow Cross-Section Simply Supported UHPC Beams

Data publikacji: 09 gru 2021

Zakres stron: 476 - 484

DOI: https://doi.org/10.2478/cee-2021-0050

Słowa kluczoweHollow cross-section, Flexural strength, Strain compatibility, Concrete flange, UHPC

© 2021 Nasser Hakeem Tu’ma et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Słowa kluczowe
Hollow cross-section, Flexural strength, Strain compatibility, Concrete flange, UHPC