<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This paper offers a finite element method (FEM) to simulate the behavior of steel fiber reinforced concrete (SFRC) beams with corrosion of the longitudinal reinforcement using the ABAQUS package. This work was undertaken with the concrete damaged plasticity model (CDP). The expansion of corrosion product was utilized to represent the steel-concrete boundary to study the behavior of SFRC beams. Three beams with three volume fractions of steel fiber (0.8 %, 1.2 %, and 1.8 %) and three reinforced concrete (RC) beams with and without stirrups were created and tested under four-point loading to assess the shear capacity of beams. Corrosion of rebars at one of the RC beams that does not contain shear reinforcements will be studied. The crack patterns and load deflections of these beams were compared with experimental results found by the authors. The conclusions of this analysis will be valuable in considering the structural behavior of SFRC structures with uniform steel bar corrosion using FEM. Analytical results showed that the suggested model is qualified in better simulation and in accuracy of numerical and experimental results. The differences between analytical and experimental results were less than 8 % for load carrying capacity and 14 % for deflection; these differences are also satisfactory within the limits of the engineering conclusion.</p>
</abstract>

This paper offers a finite element method (FEM) to simulate the behavior of steel fiber reinforced concrete (SFRC) beams with corrosion of the longitudinal reinforcement using the ABAQUS package. This work was undertaken with the concrete damaged plasticity model (CDP). The expansion of corrosion product was utilized to represent the steel-concrete boundary to study the behavior of SFRC beams. Three beams with three volume fractions of steel fiber (0.8 %, 1.2 %, and 1.8 %) and three reinforced concrete (RC) beams with and without stirrups were created and tested under four-point loading to assess the shear capacity of beams. Corrosion of rebars at one of the RC beams that does not contain shear reinforcements will be studied. The crack patterns and load deflections of these beams were compared with experimental results found by the authors. The conclusions of this analysis will be valuable in considering the structural behavior of SFRC structures with uniform steel bar corrosion using FEM. Analytical results showed that the suggested model is qualified in better simulation and in accuracy of numerical and experimental results. The differences between analytical and experimental results were less than 8 % for load carrying capacity and 14 % for deflection; these differences are also satisfactory within the limits of the engineering conclusion.

Numerical Analysis of Corrosion Reinforcements in Fibrous Concrete Beams

Civil and Environmental Engineering

This work is licensed under the Creative Commons Attribution 4.0 International License.

{"article-title":"Numerical Analysis of Corrosion Reinforcements in Fibrous Concrete Beams"}

This paper offers a finite element method (FEM) to simulate the behavior of steel fiber reinforced concrete (SFRC) beams with corrosion of the longitudinal...

Numerical Analysis of Corrosion Reinforcements in Fibrous Concrete Beams

Data publikacji: 22 cze 2021

Zakres stron: 259 - 269

DOI: https://doi.org/10.2478/cee-2021-0027

Słowa kluczowe
Corrosion, Steel fiber, SFRC, Beam, Finite element

© 2021 Faten Y. Taqi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Numerical Analysis of Corrosion Reinforcements in Fibrous Concrete Beams

Data publikacji: 22 cze 2021

Zakres stron: 259 - 269

DOI: https://doi.org/10.2478/cee-2021-0027

Słowa kluczoweCorrosion, Steel fiber, SFRC, Beam, Finite element

© 2021 Faten Y. Taqi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Słowa kluczowe
Corrosion, Steel fiber, SFRC, Beam, Finite element