<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The aim of the paper consists in the study of three Romanian types of marble (Ruschita, Albesti, Carrara) with different compositions in different temperature conditions, for different periods of time. The three samples were exposed to two different types of treatments: 25 cycles of freeze-thaw (according to SR EN 12371) and 3 cycles of exposure to high temperatures (400 °C for 1 hour). Following the freeze-thaw cycles, small differences in chromatic parameters could be observed (∆E = 2.2 for Carrara Italia marble and ∆E = 7.2 for Rușchița pink marble). The freezing coefficient for all samples is low (0.016% - 0.029%). Following exposure to high temperature treatment, the samples show large differences in chromatic parameters (∆E = 43.47 for Albesti marble) and significant changes in gloss. The surface of the samples showed cracks and microcracks. Based on the results of this study, the following conclusions can be drawn: Thermal cycles can cause the mechanical disintegration of the outer part of the marble, starting from the discontinuities contained in the rock and between the faces between the different minerals that form the stone. Exposure to high temperatures will result in a loss of adhesion between the surface grains on the sample surface. The degradation processes have been investigated.</p>
</abstract>

The aim of the paper consists in the study of three Romanian types of marble (Ruschita, Albesti, Carrara) with different compositions in different temperature conditions, for different periods of time. The three samples were exposed to two different types of treatments: 25 cycles of freeze-thaw (according to SR EN 12371) and 3 cycles of exposure to high temperatures (400 °C for 1 hour). Following the freeze-thaw cycles, small differences in chromatic parameters could be observed (∆E = 2.2 for Carrara Italia marble and ∆E = 7.2 for Rușchița pink marble). The freezing coefficient for all samples is low (0.016% - 0.029%). Following exposure to high temperature treatment, the samples show large differences in chromatic parameters (∆E = 43.47 for Albesti marble) and significant changes in gloss. The surface of the samples showed cracks and microcracks. Based on the results of this study, the following conclusions can be drawn: Thermal cycles can cause the mechanical disintegration of the outer part of the marble, starting from the discontinuities contained in the rock and between the faces between the different minerals that form the stone. Exposure to high temperatures will result in a loss of adhesion between the surface grains on the sample surface. The degradation processes have been investigated.

Evaluation of Marble Alteration Processes

Scientific Bulletin of Valahia University - Materials and Mechanics

This work is licensed under the Creative Commons Attribution 4.0 International License.

{"article-title":"Evaluation of Marble Alteration Processes"}

The aim of the paper consists in the study of three Romanian types of marble (Ruschita, Albesti, Carrara) with different compositions in different temperature...

Evaluation of Marble Alteration Processes

Data publikacji: 01 lis 2022

Zakres stron: 29 - 32

DOI: https://doi.org/10.2478/bsmm-2022-0015

Słowa kluczowe
Double substituted carbonated hydroxyapatites, wood treatments, artifacts conservation

© 2022 Ionut Octavian Zăuleț et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Evaluation of Marble Alteration Processes

Data publikacji: 01 lis 2022

Zakres stron: 29 - 32

DOI: https://doi.org/10.2478/bsmm-2022-0015

Słowa kluczoweDouble substituted carbonated hydroxyapatites, wood treatments, artifacts conservation

© 2022 Ionut Octavian Zăuleț et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Słowa kluczowe
Double substituted carbonated hydroxyapatites, wood treatments, artifacts conservation