<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The present paper proposes a method for an almost uniform pressure distribution between the rolling elements, based on the modification of the roller’s initial straight profile and accounting for material parameters related to the operating temperature. The optimization process is analyzed by including the possible misalignment and/or tilting angles of the roller due to operating conditions. A computer program was developed in the Borland C++ programming language. The contact pressure distribution is evaluated by using a three-dimensional contact analysis model based on the Boussinesq force-displacement relations for a half-space combined with the flexibility approach. For a fast analysis, the algorithm uses a Conjugate Gradient Method in deriving the contact pressures and the real contact area.</p>
</abstract>

The present paper proposes a method for an almost uniform pressure distribution between the rolling elements, based on the modification of the roller’s initial straight profile and accounting for material parameters related to the operating temperature. The optimization process is analyzed by including the possible misalignment and/or tilting angles of the roller due to operating conditions. A computer program was developed in the Borland C++ programming language. The contact pressure distribution is evaluated by using a three-dimensional contact analysis model based on the Boussinesq force-displacement relations for a half-space combined with the flexibility approach. For a fast analysis, the algorithm uses a Conjugate Gradient Method in deriving the contact pressures and the real contact area.

Cylindrical Roller Bearings with Optimized Profile Taking into Account the Material Structure and Operating Temperature

“Gheorghe Asachi” Technical University of Iaşi

Faculty of Mechanical Engineering, Department of Machine Design and Mechatronics

Bulletin of the Polytechnic Institute of Iași. Machine constructions Section

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The present paper proposes a method for an almost uniform pressure distribution between the rolling elements, based on the modification of the roller’s initial...

Cylindrical Roller Bearings with Optimized Profile Taking into Account the Material Structure and Operating Temperature

Data publikacji: 09 maj 2022

Zakres stron: 109 - 123

Otrzymano: 24 mar 2022

Przyjęty: 31 mar 2022

DOI: https://doi.org/10.2478/bipcm-2022-0009

Słowa kluczowe
profile optimization, material structure, skew, misalignment, temperature influence

© 2022 Andrei Popescu et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Cylindrical Roller Bearings with Optimized Profile Taking into Account the Material Structure and Operating Temperature

Data publikacji: 09 maj 2022

Zakres stron: 109 - 123

Otrzymano: 24 mar 2022

Przyjęty: 31 mar 2022

DOI: https://doi.org/10.2478/bipcm-2022-0009

Słowa kluczoweprofile optimization, material structure, skew, misalignment, temperature influence

© 2022 Andrei Popescu et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
profile optimization, material structure, skew, misalignment, temperature influence