<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Following the previous analytical studies performed with ATENA software for a series of RC moment resisting frame models, it were used in the pre-processing stage the stress-strain relation laws for concrete and steel reinforcement. These mathematical and graphical relations represent a necessity in the current conditions of numerical analysis and imply a correct knowledge of the deformation mode of the „reinforced concrete” which is a composite material. Thus, it is desired through this research paper the theoretical exposition of: equivalent uniaxial law for concrete, biaxial compressive failure and tensile failure consideration laws for concrete, bilinear with hardening law for steel reinforcement, cycling steel reinforcement model and steel reinforcement bond model. Finally, it will be possible to validate the correctness of the analytical RC frame systems through the experimental results of the optimal RC frame model after seismic platform testing.</p>
</abstract>

Following the previous analytical studies performed with ATENA software for a series of RC moment resisting frame models, it were used in the pre-processing stage the stress-strain relation laws for concrete and steel reinforcement. These mathematical and graphical relations represent a necessity in the current conditions of numerical analysis and imply a correct knowledge of the deformation mode of the „reinforced concrete” which is a composite material. Thus, it is desired through this research paper the theoretical exposition of: equivalent uniaxial law for concrete, biaxial compressive failure and tensile failure consideration laws for concrete, bilinear with hardening law for steel reinforcement, cycling steel reinforcement model and steel reinforcement bond model. Finally, it will be possible to validate the correctness of the analytical RC frame systems through the experimental results of the optimal RC frame model after seismic platform testing.

Stress-Strain Relation Laws for Concrete and Steel Reinforcement Used in Non-Linear Static Analytical Studies of the Moment Resisting Reinforced Concrete (RC) Frame Models

„Gheorghe Asachi” Technical University of Iasi

Bulletin of the Polytechnic Institute of Iași. Construction. Architecture Section

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Following the previous analytical studies performed with ATENA software for a series of RC moment resisting frame models, it were used in the pre-processing...

Stress-Strain Relation Laws for Concrete and Steel Reinforcement Used in Non-Linear Static Analytical Studies of the Moment Resisting Reinforced Concrete (RC) Frame Models

Data publikacji: 18 lut 2022

Zakres stron: 17 - 29

Otrzymano: 14 gru 2020

Przyjęty: 21 sty 2021

DOI: https://doi.org/10.2478/bipca-2021-0002

Słowa kluczowe
Stress-strain laws, concrete, steel reinforcement, ATENA software, RC frame system

© 2021 Ion Sococol et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Stress-Strain Relation Laws for Concrete and Steel Reinforcement Used in Non-Linear Static Analytical Studies of the Moment Resisting Reinforced Concrete (RC) Frame Models

Data publikacji: 18 lut 2022

Zakres stron: 17 - 29

Otrzymano: 14 gru 2020

Przyjęty: 21 sty 2021

DOI: https://doi.org/10.2478/bipca-2021-0002

Słowa kluczoweStress-strain laws, concrete, steel reinforcement, ATENA software, RC frame system

© 2021 Ion Sococol et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
Stress-strain laws, concrete, steel reinforcement, ATENA software, RC frame system