<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Cathodic protection system is commonly employed approach for the protection of the metallic infrastructure placed in electrolyte against corrosion. Adequate design of the cathodic protection system requires the determination of electrical potential and current density distribution on the protected object surface that meets the defined criteria. In this paper, the application of the direct boundary element method in conjunction with Newton-Raphson method was considered for the calculation of the electric potential and current density distribution on the surface of the cathodically protected underground object. The considered method was applied on the sacrificial anode cathodic protection system of the underground pipeline. The non-linear boundary conditions of the electrode surfaces of the cathodic protection system are taken into account. The method was used to determine the current density and electric potential distribution on the external wall of the protected pipeline.</p>
</abstract>

Cathodic protection system is commonly employed approach for the protection of the metallic infrastructure placed in electrolyte against corrosion. Adequate design of the cathodic protection system requires the determination of electrical potential and current density distribution on the protected object surface that meets the defined criteria. In this paper, the application of the direct boundary element method in conjunction with Newton-Raphson method was considered for the calculation of the electric potential and current density distribution on the surface of the cathodically protected underground object. The considered method was applied on the sacrificial anode cathodic protection system of the underground pipeline. The non-linear boundary conditions of the electrode surfaces of the cathodic protection system are taken into account. The method was used to determine the current density and electric potential distribution on the external wall of the protected pipeline.

Sacrificial Anode Cathodic Protection System Modelling Using Direct Boundary Element Method

B&H Electrical Engineering

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Cathodic protection system is commonly employed approach for the protection of the metallic infrastructure placed in electrolyte against corrosion. Adequate...

Sacrificial Anode Cathodic Protection System Modelling Using Direct Boundary Element Method

Data publikacji: 14 sty 2023

Zakres stron: 25 - 30

Otrzymano: 15 wrz 2022

Przyjęty: 14 gru 2022

DOI: https://doi.org/10.2478/bhee-2022-0010

Słowa kluczowe
Corrosion, Cathodic Protection System, Sacrificial Anode, Direct Boundary Element Method, Newton-Raphson Method

© 2022 Adnan Mujezinović et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Sacrificial Anode Cathodic Protection System Modelling Using Direct Boundary Element Method

Data publikacji: 14 sty 2023

Zakres stron: 25 - 30

Otrzymano: 15 wrz 2022

Przyjęty: 14 gru 2022

DOI: https://doi.org/10.2478/bhee-2022-0010

Słowa kluczoweCorrosion, Cathodic Protection System, Sacrificial Anode, Direct Boundary Element Method, Newton-Raphson Method

© 2022 Adnan Mujezinović et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
Corrosion, Cathodic Protection System, Sacrificial Anode, Direct Boundary Element Method, Newton-Raphson Method