<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Cellulose fibres are known for their good mechanical properties, therefore they are used as fillers in structural composite materials, including as nanofibrils in nanomaterials. Also, they are biocompatible, non-toxic and biodegradable, reason for their use in the food industry as packaging materials or in obtaining medical materials. One source of cheap, easy- to- extract cellulose is the algal mass of <italic>Ulva lactuca</italic>, one of the most frequent species found in the Black Sea. In this study, cellulose extraction from <italic>Ulva lactuca</italic> was achieved by a simple low cost physical-chemical treatment. Freshly harvested seaweed was dried at 45 °C for 48 hours, transformed into a fine powder in order to increase the contact surface between the solvents and the alga. Extraction of lipids and chlorophyll took place in Soxhlet apparatus with ethanol. Successive steps of chemical treatment, having in view removal of hydrosoluble ulvans, pigments and hemicellulose lead to a yield of 15.36% in dry matter (DM) of cellulose-rich insoluble fraction proving that <italic>Ulva Lactuca</italic> species is a viable alternative resource in cellulose production.</p>
</abstract>

Cellulose fibres are known for their good mechanical properties, therefore they are used as fillers in structural composite materials, including as nanofibrils in nanomaterials. Also, they are biocompatible, non-toxic and biodegradable, reason for their use in the food industry as packaging materials or in obtaining medical materials. One source of cheap, easy- to- extract cellulose is the algal mass of Ulva lactuca, one of the most frequent species found in the Black Sea. In this study, cellulose extraction from Ulva lactuca was achieved by a simple low cost physical-chemical treatment. Freshly harvested seaweed was dried at 45 °C for 48 hours, transformed into a fine powder in order to increase the contact surface between the solvents and the alga. Extraction of lipids and chlorophyll took place in Soxhlet apparatus with ethanol. Successive steps of chemical treatment, having in view removal of hydrosoluble ulvans, pigments and hemicellulose lead to a yield of 15.36% in dry matter (DM) of cellulose-rich insoluble fraction proving that Ulva Lactuca species is a viable alternative resource in cellulose production.

Cellulose fibers extraction from <italic>Ulva lactuca</italic> from the Black Sea

University “Politehnica” of Bucharest

Chemical and Biochemical Engineering Department

Ovidius University Annals of Chemistry

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Cellulose fibers extraction from  from the Black Sea

Cellulose fibres are known for their good mechanical properties, therefore they are used as fillers in structural composite materials, including as nanofibrils...

Cellulose fibers extraction from Ulva lactuca from the Black Sea

Data publikacji: 21 gru 2020

Zakres stron: 158 - 162

Otrzymano: 12 paź 2020

Przyjęty: 10 gru 2020

DOI: https://doi.org/10.2478/auoc-2020-0025

Słowa kluczowe
cellulose extraction, ulvan

© 2020 Doiniţa-Roxana Cioroiu Tirpan et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Cellulose fibers extraction from Ulva lactuca from the Black Sea

Data publikacji: 21 gru 2020

Zakres stron: 158 - 162

Otrzymano: 12 paź 2020

Przyjęty: 10 gru 2020

DOI: https://doi.org/10.2478/auoc-2020-0025

Słowa kluczowecellulose extraction, ulvan

© 2020 Doiniţa-Roxana Cioroiu Tirpan et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
cellulose extraction, ulvan