<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The paper is focused on steel surface processing to ensure an improved adhesion of applied powder layer. Mechanical pre-treatment, chemical pre-treatment and their combination were used to compare their results with each other and to find out the pre-treatment that affected the final outcome the most. The final score was determined by the grid method. The outcome displayed a huge mutual dependency between the result and a kind of various surface treatments. The method with no pre-treatment was by far the worst, followed by the mechanical pre-treatment only, followed by the chemical pre-treatment only, and finally by their combination. The time of blasting affects the final outcome. Through the grid method, coating thickness, and aesthetic test it was confirmed that an optimal blasting time of 5 min provides the best outcome.</p>
</abstract>

The paper is focused on steel surface processing to ensure an improved adhesion of applied powder layer. Mechanical pre-treatment, chemical pre-treatment and their combination were used to compare their results with each other and to find out the pre-treatment that affected the final outcome the most. The final score was determined by the grid method. The outcome displayed a huge mutual dependency between the result and a kind of various surface treatments. The method with no pre-treatment was by far the worst, followed by the mechanical pre-treatment only, followed by the chemical pre-treatment only, and finally by their combination. The time of blasting affects the final outcome. Through the grid method, coating thickness, and aesthetic test it was confirmed that an optimal blasting time of 5 min provides the best outcome.

Determining the Suitability of Various Surface Treatment Methods with the Control of Blasting Time with Respect to the Quality of Powder Coating

Acta Technologica Agriculturae

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The paper is focused on steel surface processing to ensure an improved adhesion of applied powder layer. Mechanical pre-treatment, chemical pre-treatment and...

Determining the Suitability of Various Surface Treatment Methods with the Control of Blasting Time with Respect to the Quality of Powder Coating

Data publikacji: 23 maj 2023

Zakres stron: 92 - 98

DOI: https://doi.org/10.2478/ata-2023-0013

Słowa kluczowe
mechanical pre-treatment, chemical pre-treatment, surface, blasting, curing, grid method

© 2023 Michal Neškudla et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Determining the Suitability of Various Surface Treatment Methods with the Control of Blasting Time with Respect to the Quality of Powder Coating

Data publikacji: 23 maj 2023

Zakres stron: 92 - 98

DOI: https://doi.org/10.2478/ata-2023-0013

Słowa kluczowemechanical pre-treatment, chemical pre-treatment, surface, blasting, curing, grid method

© 2023 Michal Neškudla et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
mechanical pre-treatment, chemical pre-treatment, surface, blasting, curing, grid method