<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Increasing the accuracy of position measurement is an intensively addressed issue in engineering practice. Indirect methods provide satisfactory distance information. For more accurate identification of surface geometry or tilt, systems based on image processing are frequently employed, however, these are more expensive in contrast to devices operating on the basis of acoustic principle. This paper deals with the modelling of the impulse functions of ultrasonic sensors under known geometrical conditions of their distribution. The reflecting surface is a metallic surface. Based on the results, a statistically significant non-linear correlation between the complex integral of the impulse function and the front time of the transient characteristic is shown. The change from the parallel to the perpendicular case of the longitudinal axis of ultrasonic transducer distribution due to the change in the tilt angle of reflected surface is also included in the study. The interval of change in the tilt angle of reflecting surface was from 0° to 30°.</p>
</abstract>

Increasing the accuracy of position measurement is an intensively addressed issue in engineering practice. Indirect methods provide satisfactory distance information. For more accurate identification of surface geometry or tilt, systems based on image processing are frequently employed, however, these are more expensive in contrast to devices operating on the basis of acoustic principle. This paper deals with the modelling of the impulse functions of ultrasonic sensors under known geometrical conditions of their distribution. The reflecting surface is a metallic surface. Based on the results, a statistically significant non-linear correlation between the complex integral of the impulse function and the front time of the transient characteristic is shown. The change from the parallel to the perpendicular case of the longitudinal axis of ultrasonic transducer distribution due to the change in the tilt angle of reflected surface is also included in the study. The interval of change in the tilt angle of reflecting surface was from 0° to 30°.

Modelling of Impulse Functions of Ultrasonic Sensors When Tilt Angle of Reflecting Surface is Changed

Slovak University of Agriculture in Nitra, Faculty of Engineering

Koszalin University of Technology, Faculty of Electronics and Computer Science

Department of Computer Science and Management

Acta Technologica Agriculturae

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Increasing the accuracy of position measurement is an intensively addressed issue in engineering practice. Indirect methods provide satisfactory distance...

Modelling of Impulse Functions of Ultrasonic Sensors When Tilt Angle of Reflecting Surface is Changed

Data publikacji: 27 mar 2023

Zakres stron: 1 - 8

DOI: https://doi.org/10.2478/ata-2023-0001

Słowa kluczowe
impulse function, ultrasound echo, ultrasound reflection, Hilbert transformation, measurement of angle, ultrasound

© 2023 Vladimír Madola et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Modelling of Impulse Functions of Ultrasonic Sensors When Tilt Angle of Reflecting Surface is Changed

Data publikacji: 27 mar 2023

Zakres stron: 1 - 8

DOI: https://doi.org/10.2478/ata-2023-0001

Słowa kluczoweimpulse function, ultrasound echo, ultrasound reflection, Hilbert transformation, measurement of angle, ultrasound

© 2023 Vladimír Madola et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
impulse function, ultrasound echo, ultrasound reflection, Hilbert transformation, measurement of angle, ultrasound