[
BELOEV, H. – BIRHANU, M. – BEKANA, D. 2008. Research on rebuilding wear out agricultural and transport machinery parts which are exposed to abrasive wear. In Agricultural Machinery, vol. 44, no. 2, pp. 22–28.
]Search in Google Scholar
[
DECROZANT-TRIQUENAUX, J. – PELCASTRE, L. – COURBON, C. – PRAKASH, B. –HARDEL, J. 2021. High temperature tribological behaviour of PVD coated tool steel and aluminium under dry and lubricated conditions. In Friction, vol. 9, pp. 802–821.10.1007/s40544-020-0435-7
]Search in Google Scholar
[
DIMITROV, M. 2018. Investigation of metals due to wear in used engine oil containing various friction modifiers by atomic emission spectroscopy. In Journal of the Balkan Tribological Association, vol. 24, no. 4, pp. 674–678.
]Search in Google Scholar
[
DIMITROV, M. 2019. Development of Repaired Engines with Friction Modifiers. Yambol, Stara Zagora: Faculty of Engineering and Technology – Yambol at the Thracian University, 160 pp. ISBN 9786197340006. (In Bulgarian: Razrabotvane na remontirani dvigateli s modifikatori na trieneto).
]Search in Google Scholar
[
FÜRSTENZELLER, A. – TÓTH, F. – KADNÁR, M. – RUSNÁK, J. – BOŠANSKÝ, M. 2019. Comparison of PVD coatings Nacro and TIALN + DLC deposited on high contact ratio gearing interacting with conventional and ecological lubricants. In Acta Technologica Agriculturae, vol. 22, no. 2, pp. 48–55.10.2478/ata-2019-0009
]Search in Google Scholar
[
JABLONICKÝ, J. – SIMIKIĆ, M. – TULÍK, J. – TOMIĆ, M. – HUJO, Ľ. – KOSIBA, J. 2020. Monitoring of selected physical and chemical parameters of test oil in the wet disc brake system. In Acta Technologica Agriculturae, vol. 23, no. 1, pp. 46–52.10.2478/ata-2020-0008
]Search in Google Scholar
[
KUČERA, M. – ALEŠ, Z. – PEXA, M. 2016. Detection and characterization of wear particles of universal tractor oil using of particles size analyzer. In Agronomy Research, vol. 14, no. 4, pp. 1351–1360.
]Search in Google Scholar
[
KUČERA, M. – ALEŠ, Z. 2017. Morphology analysis of friction particles generated in tractor transmission oils. In Acta Technologica Agriculturae, vol. 20, no. 3, pp. 57–62.10.1515/ata-2017-0012
]Search in Google Scholar
[
NIKOLOV, M. – KANGALOV, P. 2014. Research methods for tribological properties of restorative and preventive coatings in different lubricating media at sliding friction. In Acta Technologica Agriculturae, vol. 17, no. 3, pp. 70–74.10.2478/ata-2014-0016
]Search in Google Scholar
[
NOSIAN, J. – HUJO, Ľ. – ZASTEMPOWSKI, M. – JANOUŠKOVÁ, R. 2021. Design of laboratory test equipment for testing the hydrostatic transducers. In Acta Technologica Agriculturae, vol. 24, no. 1, pp. 35–40.10.2478/ata-2021-0006
]Search in Google Scholar
[
STARODUBTSEVA, G. – PETROVNA, L. – ALIKOVICH, S. – GABRIYELYAN, SHALIKO, L. – IVANOVNA, S. – AFANACEV, M. 2018. Process control of pre-sowing seed treatment by pulsed electric field. In Acta Technologica Agriculturae, vol. 21, no. 1, pp. 28–32.10.2478/ata-2018-0006
]Search in Google Scholar
[
PING, O. – XIANMING, Z. – LING, C. – JIAXU, W. 2015. Tribological performance and antiwear mechanism of a quinazolin-4-ones derivative as an oil additive in liquid paraffin. In Journal of the Balkan Tribological Association, vol. 21, no. 4, pp. 1143–1152.
]Search in Google Scholar
[
TKÁČ, Z. – ČORŇÁK, Š. – CVIKLOVIČ, V. – KOSIBA, J. – GLOS, J. – JABLONICKÝ, J. – BERNÁT, R. 2017. Research of biodegradable fluid impacts on operation of tractor hydraulic system. In Acta Technologica Agriculturae, vol. 20, no. 2, pp. 42–45.10.1515/ata-2017-0008
]Search in Google Scholar
[
TODOROV, I. 2019. A research about wear process of details from belt conveyor. In Agricultural, Forest and Transport Machinery and Technologies, vol. 6, no. 1, pp. 5–10.
]Search in Google Scholar
[
TULÍK, J. – KOSIBA, J. – VARGA, F. – BUREŠ, Ľ. – ŠINSKÝ, V. 2013. Analysis of synthetic oil samples during an operating test. In Acta Technologica Agriculturae, vol. 16, no. 1, pp. 22–25.10.2478/ata-2013-0006
]Search in Google Scholar
[
STANEV, L. – STANEVA, G. – KOMITOV, G. 2005. Influence of oil additives on tribotechnical indicators in the process of treatment. In Mechanics of Machines, no. 60, pp. 23–28. (In Bulgarian: Vlijanie na maslenite dobavki vrhu tribotehnicheskite pokazateli v procesa na tretirane).
]Search in Google Scholar