<abstract xmlns="http://www.w3.org/1999/xhtml">Working with subsurface engineering problems in Hydrocarbon exploration as regard rock elastic and petrophysical properties necessitate accurate determination of in-situ physical properties. Several techniques have been adopted in correlating log-derived parameters with petrophysical and mechanical behavior of the rocks. However, limited field applications show there are no particular parameters and correlations that are generally acceptable due to the regional variation in geologic features (i.e., degree of mineralogy, texture, etc.). This study presents a method that assesses the disparity in petrophysical properties of oil and gas reservoir rocks in relation to their elastic/mechanical properties from 10 well-logs and 3D migrated seismic data. Two distinct facies were identified from seismic data after computing attributes. Reflection strength attribute of 2.5 and above depicts Bright spots within the central section of the field as clearly revealed by Variance and Chaos attributes. Formation properties calculated from logs were conformally gridded in consonance with the reflection patterns from the seismic data. The average Brittleness index (BI) of 0.52 corresponds to Young’s modulus (E) values of between 8 and 16 for the dense portion. This portion is the laminated, reasonably parallel, and undeformed part, flanked by the unlaminated and chaotic zones. From cross plots, the distinguished lower portion on the plot is the segment with higher sand of more than 50 %. This segment corresponds to the reservoir in this study as confirmed from the genetic algorithm neural network Acoustic impedance inversion process result. Similarly, the plot of Compressional velocity (<italic>Vp</italic>) and Poisson’s ratio (<italic>ν</italic>), reveals the laminated sand value of not less than 0.32 of <italic>ν</italic>, and <italic>Vp </italic>of about 4.2 km/s. The average porosity is about 16 %, average water saturation is about 16 %, and average permeability is approximately 25 md. Rock properties trends in a unique pattern and showing fluctuation that confirms the compressive nature of the structure with corresponding petrophysical properties. This trend is sustained in permeability computed and suggests a significant gravity-assisted compaction trend and fluid movement. It gives a reasonable idea of the fluid movement interplay and mechanical property variation within the sequence and across the dome. This part probably has been subjected to fair compressional deformational forces initiated from outside the survey.</abstract>

Working with subsurface engineering problems in Hydrocarbon exploration as regard rock elastic and petrophysical properties necessitate accurate determination of in-situ physical properties. Several techniques have been adopted in correlating log-derived parameters with petrophysical and mechanical behavior of the rocks. However, limited field applications show there are no particular parameters and correlations that are generally acceptable due to the regional variation in geologic features (i.e., degree of mineralogy, texture, etc.). This study presents a method that assesses the disparity in petrophysical properties of oil and gas reservoir rocks in relation to their elastic/mechanical properties from 10 well-logs and 3D migrated seismic data. Two distinct facies were identified from seismic data after computing attributes. Reflection strength attribute of 2.5 and above depicts Bright spots within the central section of the field as clearly revealed by Variance and Chaos attributes. Formation properties calculated from logs were conformally gridded in consonance with the reflection patterns from the seismic data. The average Brittleness index (BI) of 0.52 corresponds to Young’s modulus (E) values of between 8 and 16 for the dense portion. This portion is the laminated, reasonably parallel, and undeformed part, flanked by the unlaminated and chaotic zones. From cross plots, the distinguished lower portion on the plot is the segment with higher sand of more than 50 %. This segment corresponds to the reservoir in this study as confirmed from the genetic algorithm neural network Acoustic impedance inversion process result. Similarly, the plot of Compressional velocity (Vp) and Poisson’s ratio (ν), reveals the laminated sand value of not less than 0.32 of ν, and Vp of about 4.2 km/s. The average porosity is about 16 %, average water saturation is about 16 %, and average permeability is approximately 25 md. Rock properties trends in a unique pattern and showing fluctuation that confirms the compressive nature of the structure with corresponding petrophysical properties. This trend is sustained in permeability computed and suggests a significant gravity-assisted compaction trend and fluid movement. It gives a reasonable idea of the fluid movement interplay and mechanical property variation within the sequence and across the dome. This part probably has been subjected to fair compressional deformational forces initiated from outside the survey.

Comparative Characterization of Petrophysical and Mechanical Properties of Siliciclastic Reservoir Rocks within a compressional structure of the Teapot Dome Oilfield, Wyoming, USA

Petroleum Reservoir and Production Technology Research Group (PRPTRG), Petroleum Engineering Department

Annals of Science and Technology

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Working with subsurface engineering problems in Hydrocarbon exploration as regard rock elastic and petrophysical properties necessitate accurate determination...

Comparative Characterization of Petrophysical and Mechanical Properties of Siliciclastic Reservoir Rocks within a compressional structure of the Teapot Dome Oilfield, Wyoming, USA

Data publikacji: 24 lis 2020

Zakres stron: 1 - 12

Otrzymano: 19 maj 2020

Przyjęty: 22 lip 2020

DOI: https://doi.org/10.2478/ast-2020-0009

Słowa kluczowe
Seismic attributes, seismic inversion, Permeability, Bright spots, Brittleness index, Acoustic impedance

© 2020 Rotimi Oluwatosin John et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Comparative Characterization of Petrophysical and Mechanical Properties of Siliciclastic Reservoir Rocks within a compressional structure of the Teapot Dome Oilfield, Wyoming, USA

Data publikacji: 24 lis 2020

Zakres stron: 1 - 12

Otrzymano: 19 maj 2020

Przyjęty: 22 lip 2020

DOI: https://doi.org/10.2478/ast-2020-0009

Słowa kluczoweSeismic attributes, seismic inversion, Permeability, Bright spots, Brittleness index, Acoustic impedance

© 2020 Rotimi Oluwatosin John et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
Seismic attributes, seismic inversion, Permeability, Bright spots, Brittleness index, Acoustic impedance