The effect of third molars on maxillary molar distalisation using a miniscrew-supported 3D® maxillary bimetric distalising arch
oraz
29 wrz 2022
O artykule
Data publikacji: 29 wrz 2022
Zakres stron: 319 - 328
Otrzymano: 01 maj 2022
Przyjęty: 01 wrz 2022
DOI: https://doi.org/10.2478/aoj-2022-033
Słowa kluczowe
© 2022 Nilüfer İrem Tunçer et al., published by Sciendo
This work is licensed under the Creative Commons Attribution 4.0 International License.
Figure 1.

Figure 2.

Figure 3.

Figure 4.

Demographic characteristics of patients in the treatment groups_
Group 1 (Third molars extracted) ( |
Group 2 (Third molars present) ( |
||||
---|---|---|---|---|---|
Mean (min-max) or |
SD | Mean (min-max) or n | SD | ||
Age (years) | 15.7 | 2.8 | 15.7 | 1.7 | 0.567 |
(13.4-21.2) | (13.7-18.9) | ||||
Sex | |||||
Female | 9 | 10 | 0.876 | ||
Male | 2 | 2 | |||
Anteroposterior discrepancy | |||||
1 / 4-cusp | 0 | 0 | 0.789 | ||
1 /2-cusp | 6 | 7 | |||
3/4-cusp | 2 | 3 | |||
full-cusp | 3 | 2 |
Comparison of cephalometric and model measurements at the beginning of distalization (T0) and changes achieved with distalization (T1-T0)_
Group 1 (Third molars extracted) | Group 2 (Third molars present) | |||||||
---|---|---|---|---|---|---|---|---|
T0 | Changes | T0 | Changes | Between groups | ||||
Mean ± SD | Mean ± SD | Mean ± SD | Mean ± SD | Comparison at T0 |
Comparison of changes |
|||
Skeletal | ||||||||
SNA (°) | 80.7 ± 2.6 | -1.1 ± 2.3 | 0.214 | 81.8 ± 2.9 | -1.3 ± 2.8 | 0.292 | 0.391 | 0.066 |
SNB (°) | 74.9 ± 2.6 | 1.1 ± 1.5 | 0.396 | 75.8 ± 3.4 | 0.9 ± 1.5 | 0.721 | 0.369 | 0.437 |
ANB (°) | 5.8 ± 1.9 | -0.5 ± 1.6 | 0.678 | 6 ± 3 | 0.9 ± 1.5 | 0.357 | 0.806 | 0.413 |
GoGn . SN (°) | 30.1 ± 4.1 | -1.2 ± 1.5 | 0.678 | 33.3 ± 6.7 | -0.8 ± 1.2 | 0.541 | 0.307 | 0.967 |
Dental - Model | ||||||||
U5 - rugae line (mm) | 6.1 ± 2.9 | 3.2 ± 2.1 | 8.2 ± 2.7 | 3.6 ± 1.9 | 0.142 | 0.514 | ||
U6 - rugae line (mm) | 15.3 ± 3 | 4.5 ± 1.8 | 17.3 ± 2.6 | 3.9 ± 1.7 | 0.102 | 0.191 | ||
U7 - rugae line (mm) | 25.7 ± 3.3 | 4.8 ± 1.9 | 28.3 ± 2.5 | 3.6 ± 2.3 | ||||
U5 - U5 (mm) | 43.1 ± 3.6 | 1.8 ± 2.1 | 43.9 ± 4.3 | 2.1 ± 3.9 | 0.288 | 0.514 | ||
U6 - U6 (mm) | 41.8 ± 4.1 | -0.2 ± 1.6 | 0.859 | 42.8 ± 2.7 | 0.6 ± 1.6 | 0.333 | 0.327 | 0.369 |
U7 - U7 (mm) | 47.2 ± 3.1 | 1.9 ± 3.7 | 48.6 ± 3.6 | 7.2 ± 4.9 | 0.369 | |||
U5 . U5 (°) | 137.9 ± 11.4 | 10.5 ± 6 | 135.8 ± 10.3 | 6.7 ± 6.9 | 0.935 | 0.051 | ||
U6 . U6 (°) | 119 ± 9.3 | -2.5 ± 7.5 | 0.314 | 121.9 ± 10 | -2.7 ± 5.1 | 0.169 | 0.462 | 0.838 |
U7 . U7 (°) | 120 ± 6.4 | 3.7 ± 4.7 | 119.6 ± 11.9 | -6.2 ± 8.7 | 0.241 | 0.935 | ||
Dental - Cephalometric | ||||||||
U6M - VRP (mm) | 41.2 ± 4.1 | -3.9 ± 2.3 | 39.3 ± 3 | -3.4 ± 2.4 | 0.414 | 0.178 | ||
U6trifurc. - VRP (mm) | 37.6 ± 3.8 | -4.5 ± 5.6 | 36 ± 3.3 | -3.5 ± 3.2 | 0.514 | |||
U6root - VRP (mm) | 40.3 ± 3.7 | -5.5 ± 4.3 | 38.7 ± 3.7 | -3.8 ± 5.4 | 0.624 | |||
U5 . HRP (°) | 96.2 ± 3.6 | 7.6 ± 3.7 | 96.8 ± 4.8 | 8.6 ± 3.1 | 0.902 | 0.683 | ||
U6 . HRP (°) | 98 ± 3.5 | -7.7 ± 3.2 | 100.9 ± 3.6 | -3.9 ± 2.7 | 0.102 | |||
U7 . HRP (°) | 108.4 ± 7.7 | -4.1 ± 4.6 | 113 ± 4.6 | -1.1 ± 2.2 | 0.139 | 0.142 | ||
U6 MB - HRP (mm) | 64.2 ± 5.3 | -1.9 ± 1.1 | 59.9 ± 3.8 | -1.1 ± 0.9 | 0.079 | |||
Occ Plane . SN (°) | 18.3 ± 5 | 4.9 ± 3.7 | 16.9 ± 4.2 | 2.2 ± 3.2 | 0.462 | |||
U1i - VRP (mm) | 66.2 ± 7.8 | -1.2 ± 1.6 | 65.5 ± 4.6 | -0.5 ± 2.7 | 0.775 | 0.066 | ||
U1 . HRP (°) | 108.9 ± 11 | -2.1 ± 2.8 | 108.5 ± 8.2 | -3 ± 2.2 | 0.568 | 0.221 | ||
L1 . HRP (°) | 62.7 ± 5.8 | 0.9 ± 1.2 | 0.579 | 64.1 ± 4.3 | 0.7 ± 0.9 | 0.668 | 0.229 | 0.765 |
Overjet (mm) | 5.8 ± 2.8 | -1.4 ± 1.9 | 0.261 | 5.2 ± 1.9 | -1.1 ± 1.9 | 0.553 | 0.624 | 0.178 |
Overbite (mm) | 3.7 ± 1.7 | -0.9 ± 1.2 | 0.859 | 3.2 ± 1.5 | -1.5 ± 1.9 | 0.059 | 0.624 | 0.102 |