<abstract xmlns="http://www.w3.org/1999/xhtml">

<italic>Objective:</italic> To compare the shear bond strengths (SBS) of stainless steel brackets bonded to artificially-aged composite restorations after different surface treatments.
<italic>Methods:</italic> Forty-five premolar teeth were restored with a nano-hybrid composite (Tetric EvoCeram), stored in deionised water for one week and randomly divided into three equal groups: Group I, the restorations were exposed to 5 per cent hydrofluoric acid for 60 seconds; Group II, the restorations were abraded with a micro-etcher (50 μm alumina particles); Group III, the restorations were roughened with a coarse diamond bur. Similar premolar brackets were bonded to each restoration using the same resin adhesive and the specimens were then cycled in deionised water between 5 °C and 55 °C (500 cycles). The shear bond strengths were determined with a universal testing machine at a crosshead speed of 1 mm/min. The teeth and brackets were examined under a stereomicroscope and the adhesive remnants on the teeth scored with the adhesive remnant index (ARI).
<italic>Results:</italic> Specimens treated with the diamond bur had a significantly higher SBS (Mean: 18.45 ± 3.82 MPa) than the group treated with hydrofluoric acid (Mean: 12.85 ± 5.20 MPa). The mean SBS difference between the air-abrasion (Mean: 15.36 ± 4.92 MPa) and hydrofluoric acid groups was not significant. High ARI scores occurred following abrasion with a diamond bur (100 per cent) and micro-etcher (80 per cent). In approximately two thirds of the teeth no adhesive was left on the restoration after surface treatment with hydofluoric acid.
<italic>Conclusion:</italic> Surface treatment with a diamond bur resulted in a high bond strength between stainless steel brackets and artificially-aged composite restorations and was considered to be a safe and effective method of surface treatment. Most of the adhesive remained on the tooth following surface treatment with either the micro-etcher or the diamond bur.
</abstract>

Objective: To compare the shear bond strengths (SBS) of stainless steel brackets bonded to artificially-aged composite restorations after different surface treatments.
Methods: Forty-five premolar teeth were restored with a nano-hybrid composite (Tetric EvoCeram), stored in deionised water for one week and randomly divided into three equal groups: Group I, the restorations were exposed to 5 per cent hydrofluoric acid for 60 seconds; Group II, the restorations were abraded with a micro-etcher (50 μm alumina particles); Group III, the restorations were roughened with a coarse diamond bur. Similar premolar brackets were bonded to each restoration using the same resin adhesive and the specimens were then cycled in deionised water between 5 °C and 55 °C (500 cycles). The shear bond strengths were determined with a universal testing machine at a crosshead speed of 1 mm/min. The teeth and brackets were examined under a stereomicroscope and the adhesive remnants on the teeth scored with the adhesive remnant index (ARI).
Results: Specimens treated with the diamond bur had a significantly higher SBS (Mean: 18.45 ± 3.82 MPa) than the group treated with hydrofluoric acid (Mean: 12.85 ± 5.20 MPa). The mean SBS difference between the air-abrasion (Mean: 15.36 ± 4.92 MPa) and hydrofluoric acid groups was not significant. High ARI scores occurred following abrasion with a diamond bur (100 per cent) and micro-etcher (80 per cent). In approximately two thirds of the teeth no adhesive was left on the restoration after surface treatment with hydofluoric acid.
Conclusion: Surface treatment with a diamond bur resulted in a high bond strength between stainless steel brackets and artificially-aged composite restorations and was considered to be a safe and effective method of surface treatment. Most of the adhesive remained on the tooth following surface treatment with either the micro-etcher or the diamond bur.

The effects of various surface treatments on the shear bond strengths of stainless steel brackets to artificially-aged composite restorations

Department of Orthodontics and Dental Research Center, School of Dentistry

Shahid Beheshti University of Medical Sciences

Department of Operative Dentistry and Dental Research Center

Australasian Orthodontic Journal

This work is licensed under the Creative Commons Attribution 4.0 International License.

Objective: To compare the shear bond strengths (SBS) of stainless steel brackets bonded to artificially-aged composite restorations after different surface...

The effects of various surface treatments on the shear bond strengths of stainless steel brackets to artificially-aged composite restorations

Data publikacji: 01 sie 2023

Zakres stron: 28 - 32

Otrzymano: 01 lip 2010

Przyjęty: 01 gru 2010

DOI: https://doi.org/10.2478/aoj-2011-0006

© 2011 Ladan Eslamian et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.