<abstract xmlns="http://www.w3.org/1999/xhtml">

The Pb(Mg1/3Nb2/3)O3-based ceramic system was obtained by using a modified variant of the conventional ceramic method in order to get pyrochlore-free compositions. Solid solutions obtained from Pb(Mg1/3Nb2/3)O3 and Ln(Mg1/2Ti1/2)O3 with Ln = Y3+, La3+, Pr3+, Nd3+ and Sm3+, were synthesized using a 3-step columbite precursor method and appropriate milling and sintering conditions. The structural phases of all sintered compositions were investigated in detail. The X-ray diffraction results demonstrate that all the samples possess a perovskite structure. The influence of dopant on the incorporation degree in the solid solutions was studied. The dielectric constants at three frequencies were measured and the influence of the dopant on these values was discussed.
</abstract>

The Pb(Mg1/3Nb2/3)O3-based ceramic system was obtained by using a modified variant of the conventional ceramic method in order to get pyrochlore-free compositions. Solid solutions obtained from Pb(Mg1/3Nb2/3)O3 and Ln(Mg1/2Ti1/2)O3 with Ln = Y3+, La3+, Pr3+, Nd3+ and Sm3+, were synthesized using a 3-step columbite precursor method and appropriate milling and sintering conditions. The structural phases of all sintered compositions were investigated in detail. The X-ray diffraction results demonstrate that all the samples possess a perovskite structure. The influence of dopant on the incorporation degree in the solid solutions was studied. The dielectric constants at three frequencies were measured and the influence of the dopant on these values was discussed.

Obtaining and Characterizing the Pb(Mg1/3Nb2/3)O3–Ln(Mg1/2Ti1/2)O3 Doped System

Acta Marisiensis. Seria Technologica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Obtaining and Characterizing the Pb(MgNb)O–Ln(MgTi)O Doped System

The Pb(Mg1/3Nb2/3)O3-based ceramic system was obtained by using a modified variant of the conventional ceramic method in order to get pyrochlore-free...

Obtaining and Characterizing the Pb(Mg_1/3Nb_2/3)O₃–Ln(Mg_1/2Ti_1/2)O₃ Doped System

Data publikacji: 19 maj 2022

Zakres stron: 13 - 16

DOI: https://doi.org/10.2478/amset-2022-0003

Słowa kluczowe
piezoceramics, ferroelectric relaxors, mixed oxide, perovskit structure

© 2022 Alina Iulia Dumitru, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Obtaining and Characterizing the Pb(Mg1/3Nb2/3)O3–Ln(Mg1/2Ti1/2)O3 Doped System

Data publikacji: 19 maj 2022

Zakres stron: 13 - 16

DOI: https://doi.org/10.2478/amset-2022-0003

Słowa kluczowepiezoceramics, ferroelectric relaxors, mixed oxide, perovskit structure

© 2022 Alina Iulia Dumitru, published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Obtaining and Characterizing the Pb(Mg_1/3Nb_2/3)O₃–Ln(Mg_1/2Ti_1/2)O₃ Doped System

Słowa kluczowe
piezoceramics, ferroelectric relaxors, mixed oxide, perovskit structure