<abstract xmlns="http://www.w3.org/1999/xhtml">

This paper collects data on the static sensitization emulsification process flow of Kings-type emulsion explosives, analyzes the collected data by combining the indicator factors and probability density functions in the time-domain analysis, and designs a safety monitor for the static sensitization process flow. In order to pursue more rigorous production safety, the static sensitization process optimization objective function was determined, and the function was constrained as well as quadratically linearized to construct a static sensitization process safety optimization model based on quadratic linear programming. After analysis, it is concluded that the safety factors affecting the static sensitization process are temperature, sensitizer, number of sensitizer stages and pressure. Other conditions are the same, the foaming density can finally reach 1.23<italic>g/cm</italic>3 when low-temperature static sensitization, but the time spent is longer 14<italic>h</italic>, and the foaming density decreases from 1.41<italic>g/cm</italic>3 to 1.09<italic>g/cm</italic>3 as the amount of sensitizer increases.
</abstract>

This paper collects data on the static sensitization emulsification process flow of Kings-type emulsion explosives, analyzes the collected data by combining the indicator factors and probability density functions in the time-domain analysis, and designs a safety monitor for the static sensitization process flow. In order to pursue more rigorous production safety, the static sensitization process optimization objective function was determined, and the function was constrained as well as quadratically linearized to construct a static sensitization process safety optimization model based on quadratic linear programming. After analysis, it is concluded that the safety factors affecting the static sensitization process are temperature, sensitizer, number of sensitizer stages and pressure. Other conditions are the same, the foaming density can finally reach 1.23g/cm3 when low-temperature static sensitization, but the time spent is longer 14h, and the foaming density decreases from 1.41g/cm3 to 1.09g/cm3 as the amount of sensitizer increases.

Safety considerations of static sensitization emulsification technology for Kings-type emulsion explosives based on quadratic linear programming algorithm

Applied Mathematics and Nonlinear Sciences

This work is licensed under the Creative Commons Attribution 4.0 International License.

This paper collects data on the static sensitization emulsification process flow of Kings-type emulsion explosives, analyzes the collected data by combining...

Safety considerations of static sensitization emulsification technology for Kings-type emulsion explosives based on quadratic linear programming algorithm

Data publikacji: 11 paź 2023

Zakres stron: -

Otrzymano: 29 lis 2022

Przyjęty: 21 kwi 2023

DOI: https://doi.org/10.2478/amns.2023.2.00610

Słowa kluczowe
Time domain analysis, Quadratic linear programming, Safety factor, Kings-type emulsified explosives, Static sensitized emulsification

© 2023 Xiuyong Tang et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Safety considerations of static sensitization emulsification technology for Kings-type emulsion explosives based on quadratic linear programming algorithm

Data publikacji: 11 paź 2023

Zakres stron: -

Otrzymano: 29 lis 2022

Przyjęty: 21 kwi 2023

DOI: https://doi.org/10.2478/amns.2023.2.00610

Słowa kluczoweTime domain analysis, Quadratic linear programming, Safety factor, Kings-type emulsified explosives, Static sensitized emulsification

© 2023 Xiuyong Tang et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Słowa kluczowe
Time domain analysis, Quadratic linear programming, Safety factor, Kings-type emulsified explosives, Static sensitized emulsification