Prediction of mud cake formation for shield tunneling based on cutterhead opening parameters

[1] Cui, J., Broere, W., & Lin, D. (2021). Underground space utilisation for urban renewal. Tunnelling and Underground Space Technology, 108, 103726. https://doi.org/10.1016/j.tust.2020.103726 Search in Google Scholar

[2] Qin, C., Shi, G., Tao, J., Yu, H., Jin, Y., Lei, J., & Liu, C. (2021). Precise cutterhead torque prediction for shield tunneling machines using a novel hybrid deep neural network. Mechanical Systems and Signal Processing, 151, 107386. https://doi.org/10.1016/j.ymssp.2020.107386 Search in Google Scholar

[3] Li, J., Zhang, Z., Liu, C., Su, K., & Guo, J. (2021). Numerical failure analysis and fatigue life prediction of shield machine cutterhead. Materials, 14. https://doi.org/10.3390/ma14174822 Search in Google Scholar

[4] Ning, B., Liu, H., Cui, J., Xia, Y., Lin, L., Zhao, S., & Fu, J. (2020). Failure analysis of center cutter mount in shield machine under tuff layer. Engineering Failure Analysis, 117. https://doi.org/10.1016/j.engfailanal.2020.104940 Search in Google Scholar

[5] Liu, F., Wang, Q., Ji, Z., & Lin, L. (2022). Performance assessment and structural design of the atmospheric cutterhead of slurry shield machine. Journal of Mechanical Science and Technology, 36, 5611–5624. https://doi.org/10.1007/s12206-022-1024-7 Search in Google Scholar

[6] Fu, J., Xia, Y., Lan, H., Wu, D., & Lin, L. (2021). A case study on TBM cutterhead temperature monitoring and mud cake formation discrimination method. Scientific Reports, 11. https://doi.org/10.1038/s41598-021-99439-x Search in Google Scholar

[7] Zhou, W., Wu, H., & Zhao, J. (2019). On driving strategy of the shield machine with atmospheric cutterhead in mudstone strata. Modern Tunnelling Technology, 56, 8–15. Search in Google Scholar

[8] Hollmann, F. S., & Thewes, M. (2013). Assessment method for clay clogging and disintegration of fines in mechanised tunnelling. Tunnelling and Underground Space Technology, 37, 96–106. https://doi.org/10.1016/j.tust.2013.03.010 Search in Google Scholar

[9] Feinendegen, M., Ziegler, M., Spagnoli, G., Fernandez-Steeger, T., & Stanjek, H. (2010). A new laboratory test to evaluate the problem of clogging in mechanical tunnel driving with EPB-shields. In ISRM International Symposium - EUROCK 2010, Lausanne, Switzerland, June 2010. Search in Google Scholar

[10] Spagnoli, G., Azzam, R., Feinendegen, M., Fernández-Steeger, T. M., & Stanjek, H. (2009). Modification of mechanical behaviour of clays for improving TBM tunnel driving. In Underground Space Seminar/Rock Engineering Seminar 2009. Search in Google Scholar

[11] Liu, P., Yang, Z., Ji, F., Chen, P., Hu, Q., & He, X. (2024). Study on mudcake disintegration in clayey strata during shield tunneling: Effects of dispersants and bentonite slurry. Heliyon, 10, e30663. https://doi.org/10.1016/j.heliyon.2024.e30663 Search in Google Scholar

[12] Ji, F., Liu, P., Yang, Z., Wen, B., & Hu, Q. (2024). Experimental study and mechanism analysis of high-pressure water jet for mud cake cutting during shield tunneling. Frontiers in Earth Science (Lausanne), 12. https://doi.org/10.3389/feart.2024.1371212 Search in Google Scholar

[13] Fang, Y., Yao, Y., Song, T., Wei, L., Liu, P., & Zhuo, B. (2022). Study on disintegrating characteristics and mechanism of cutterhead mud-caking in cohesive strata. Bulletin of Engineering Geology and the Environment, 81. https://doi.org/10.1007/s10064-022-03018-x Search in Google Scholar

[14] Zhao, S., Li, S., Wan, Z., & Wang, M. (2021). Dispersant for reducing mud cakes of slurry shield tunnel boring machine in sticky ground. Advances in Materials Science and Engineering, 2021, 1–10. Search in Google Scholar

[15] Mei, Y., Zhou, D., Gong, H., Ke, X., Xu, W., & Shi, W. (2022). Study on comprehensive technology of preventing mud cake of large diameter slurry shield in composite stratum. Buildings, 12. https://doi.org/10.3390/buildings12101555 Search in Google Scholar

[16] Ying, K., Pan, X., Lian, M., Zou, F., Xu, G., Zhou, K., & Fang, Y. (2023). Effect of soil-cutterhead interface temperature on the consolidation and hardening of mud cake under multi-factor conditions. Arabian Journal for Science and Engineering, 48, 12931–12943. https://doi.org/10.1007/s13369-023-07634-x Search in Google Scholar

[17] Qin, C. J., Wu, R. H., Huang, G. Q., Tao, J. F., & Liu, C. L. (2023). A novel LSTM-autoencoder and enhanced transformer-based detection method for shield machine cutterhead clogging. Science China Technological Sciences, 66, 512–527. https://doi.org/10.1007/s11431-022-2218-9 Search in Google Scholar

[18] Li, X., Yang, Y., Li, X., & Liu, H. (2022). Criteria for cutting head clogging occurrence during slurry shield tunneling. Applied Sciences, 12. https://doi.org/10.3390/app12031001 Search in Google Scholar

[19] Ding, X., Xie, A. Y., Yang, H., & Li, S. (2023). Quantifying multifactor effects on mud cake formation risk for a tunnel boring machine with the analytical hierarchy process. Buildings, 13. https://doi.org/10.3390/buildings13020355 Search in Google Scholar

[20] Wu, R., Qin, C., Huang, G., Tao, J., & Liu, C. (2024). Precise cutterhead clogging detection for shield tunneling machine based on deep residual networks. International Journal of Control, Automation and Systems, 22, 1090–1104. https://doi.org/10.1007/s12555-022-0576-8 Search in Google Scholar

[21] Zhou, C., Gao, Y., Chen, E. J., Ding, L., & Qin, W. (2023). Deep learning technologies for shield tunneling: Challenges and opportunities. Automation in Construction, 154, 104982. https://doi.org/10.1016/j.autcon.2023.104982 Search in Google Scholar

[22] Chung, J., Ahmad, R., Sun, W., Cai, W., & Mukerji, T. (2024). Prediction of effective elastic moduli of rocks using graph neural networks. Computer Methods in Applied Mechanics and Engineering, 421, 116780. https://doi.org/10.1016/j.cma.2024.116780 Search in Google Scholar

[23] Savvides, A.-A., Antoniou, A. A., Papadopoulos, L., Monia, A., & Kofina, K. (2023). An estimation of clayey-oriented rock mass material properties, sited in Koropi, Athens, Greece, through feed-forward neural networks. Geotechnics, 3, 975–988. https://doi.org/10.3390/geotechnics3040052 Search in Google Scholar

[24] Zhang, P., Yin, Z.-Y., & Sheil, B. (2023). Interpretable data-driven constitutive modelling of soils with sparse data. Computers and Geotechnics, 160, 105511. https://doi.org/10.1016/j.compgeo.2023.105511 Search in Google Scholar

[25] Savvides, A. A., & Papadopoulos, L. (2024). A neural network approach for the reliability analysis on failure of shallow foundations on cohesive soils. International Journal of Geo-Engineering, 15. https://doi.org/10.1186/s40703-024-00217-1 Search in Google Scholar

[26] Li, X. (2019). Tunneling construction technology of panel type cutterhead soil pressure shield in soft soil layer. Construction Technology, 48, 854–856. Search in Google Scholar

[27] Zhang, Y., & Yao, Z. (2018). On configuration and optimization of cutting tools for the supper-large shield passing through the upper-soft and lower-hard stratum. Modern Tunnelling Technology, 55, 180–188. Search in Google Scholar

[28] Pan, X. (2021). Cause analysis and prevention measures of mud cake on cutterhead of large diameter slurry shield in upper soft and lower hard stratum. Construction Technology, 50, 33–36. Search in Google Scholar

[29] Liu, H., & Yang, H. (2016). Construction technologies for EPB shield boring in hard-soft heterogeneous ground with high viscidity: A case study on a shallow-covered shield tunnel on Changsha-Zhuzhou-Xiangtan intercity railway. Tunnel Construction, 36, 221–227. Search in Google Scholar

[30] Zhang, B., Hu, P., Wen, F., Yang, H., & Li, Q. (2017). The optimization and modification technology of shield cutter heads on construction site. Construction Technology, 46, 113–117. Search in Google Scholar

[31] Li, C., He, S., & Liu, X. (2017). Study on main parameters control of tunneling through the Yellow River by a slurry balance shield in sandy gravel stratum with some large-size grains. China Civil Engineering Journal, 50, 147–152. Search in Google Scholar

[32] Yang, Z., Jiang, Y., & Zhang, J. (2018). Radial opening ratio of EPB TBM cutterheads. Chinese Journal of Geotechnical Engineering, 40, 2312–2317. Search in Google Scholar

[33] Cao, J. (2019). Discussion on the reconstruction of diameter limiting block of shield cutter head in water-rich sand pebble formation. Construction Mechanization, 10, 43–46. Search in Google Scholar

[34] Li, M. (2017). Comparative study on the modification of shield cutter-head and the excavation performance. Urban Mass Transit, 20, 44–47. Search in Google Scholar

[35] Chen, Y., Zhang, R., & Li, M. (2015). Prevention and cure of cutter-head mud cake of composite EPBM in compound stratum. Journal of Municipal Technology, 33, 165–169. Search in Google Scholar

[36] Huang, D. (2020). Discussion on the measures of super-diameter muddy water shield pressure knife plate to prevent mud pie. Construction Mechanization, 41, 30–32. Search in Google Scholar

[37] Tian, S. (2020). Analysis on prevention and control technology of mud-cake on cutterhead of slurry shield TBM. Construction Technology, 49, 75–78. Search in Google Scholar

[38] Huai, P., An, H., Bai, X., Qi, W., & Yang, Z. (2020). Type selection of shields in water-rich Kurkar stratum in Israel. Tunnel Construction, 40, 276–282. Search in Google Scholar

[39] Dai, H. (2015). Research on slurry TBM modification and high efficiency circulating slag in whole section of clay stratum. Railway Standard Design, 59, 103–108. Search in Google Scholar

[40] Wang, W. (2020). Overall design and construction of the large-diameter cross-river tunnel of Hangzhou Metro. Urban Rapid Rail Transit, 33, 91–98. Search in Google Scholar

[41] Wei, X. (2012). Construction technology of earth pressure balance shield long distance boring through sandy formation. Underground Engineering and Tunnels, 19–21. Search in Google Scholar

[42] Bai, Y. (2016). Construction technology research and application of large opening rate cutter head in water-rich silty fine sand stratum. Railway Construction Technology, 57–60. Search in Google Scholar

[43] Yang, Z. (2020). On shield machine selection for spring water drainage area in Jinan. Journal of Municipal Technology, 38, 171–176. Search in Google Scholar

[44] Zhou, Q. (2020). Selection of shield machines for complex strata of Tsinghuayuan Tunnel in Beijing-Zhangjiakou High-Speed Railway. Railway Investigation and Surveying, 46, 69–73. Search in Google Scholar

[45] Zhang, R. (2019). Cause and prevention of mud caking of shield machine in dry silty soils. Engineering and Technological Research, 4, 107–110. Search in Google Scholar

[46] Awad, M., & Khanna, R. (2015). Support vector machines for classification. In Efficient Learning Machines: Theories, Concepts, and Applications for Engineers and System Designers (pp. 39–66). Berkeley, CA: ISBN 978-1-4302-5990-9. Search in Google Scholar

[47] Gold, C., & Sollich, P. (2003). Model selection for support vector machine classification. Neurocomputing, 55, 221–249. Search in Google Scholar

[48] Omelina, L., Goga, J., Pavlovicova, J., Oravec, M., & Jansen, B. (2021). A survey of iris datasets. Image and Vision Computing, 108, 104109. https://doi.org/10.1016/j.imavis.2021.104109 Search in Google Scholar

[49] Huang, H., Chang, J., Zhang, D., Zhang, J., Wu, H., & Li, G. (2022). Machine learning-based automatic control of tunneling posture of shield machine. Journal of Rock Mechanics and Geotechnical Engineering, 14, 1153–1164. https://doi.org/10.1016/j.jrmge.2022.06.001 Search in Google Scholar

[50] Wang, X., Zhang, J., Song, W., Guo, F., & Yao, C. (2024). A segment flotation prediction model for shield tunnel construction based on a hybrid neural network. Geotechnical and Geological Engineering. https://doi.org/10.1007/s10706-024-02845-x Search in Google Scholar

[51] Huang, Z., Liao, M., Zhang, H., Zhang, J., Ma, S., & Zhu, Q. (2022). Predicting tunnel squeezing using the SVM-BP combination model. Geotechnical and Geological Engineering, 40, 1387–1405. https://doi.org/10.1007/s10706-021-01970-1 Search in Google Scholar

[52] Fang, Y., Wang, K., Tao, L., Liu, P., & Deng, Y. (2020). Experimental study on clogging of cutterhead for panel earth-pressure-balance shield tunneling in cohesive strata. Chinese Journal of Geotechnical Engineering, 42, 1651–1658. Search in Google Scholar

[53] Ning, Y. (2013). The technology of shield construction in 5-1 silty clay layer of Ningbo Rail Transit L2. China Municipal Engineering, 70–73. Search in Google Scholar