<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The piping system in the mechanical hydraulic system occupies a large proportion, and the working environment of the whole piping system is relatively complex. This paper is based on the digital model of the mechanical hydraulic system and the optimization of the piping system in the mechanical, hydraulic system. Through the Newton method, we establish a mechanical, hydraulic piping model by studying the two ends of the solid support of a simple straight single pipe so as to optimize the mechanical, hydraulic piping system. Using ANSYS Workbench software, the optimized fluid and solid states are solved using the fluid-solid coupling method to analyze the fluid-solid coupling modes of the pipeline. In the first four orders of the pipeline system, the intrinsic frequency decreases with the increase of the flow velocity, and the inherent frequency tends to 0. As the axial force increases, the first four orders of the intrinsic frequency increase slowly. As fluid pressure increases, there is a small decrease in the inherent frequency of the first four orders. The simulation results are compared with experimental data, and the relative errors of the simulation results obtained by the fluid-solid coupling method do not exceed 2% under typical pressure conditions. The simulation calculation results are virtually identical to the test data, indicating that the simulation results are genuine and reliable.</p>
</abstract>

The piping system in the mechanical hydraulic system occupies a large proportion, and the working environment of the whole piping system is relatively complex. This paper is based on the digital model of the mechanical hydraulic system and the optimization of the piping system in the mechanical, hydraulic system. Through the Newton method, we establish a mechanical, hydraulic piping model by studying the two ends of the solid support of a simple straight single pipe so as to optimize the mechanical, hydraulic piping system. Using ANSYS Workbench software, the optimized fluid and solid states are solved using the fluid-solid coupling method to analyze the fluid-solid coupling modes of the pipeline. In the first four orders of the pipeline system, the intrinsic frequency decreases with the increase of the flow velocity, and the inherent frequency tends to 0. As the axial force increases, the first four orders of the intrinsic frequency increase slowly. As fluid pressure increases, there is a small decrease in the inherent frequency of the first four orders. The simulation results are compared with experimental data, and the relative errors of the simulation results obtained by the fluid-solid coupling method do not exceed 2% under typical pressure conditions. The simulation calculation results are virtually identical to the test data, indicating that the simulation results are genuine and reliable.

Design and Optimization Analysis of Mechanical Hydraulic System Based on ANSYS Workbench

Zhejiang Guangsha Vocational and Technical University of Construction

Applied Mathematics and Nonlinear Sciences

This work is licensed under the Creative Commons Attribution 4.0 International License.

The piping system in the mechanical hydraulic system occupies a large proportion, and the working environment of the whole piping system is relatively complex....

Design and Optimization Analysis of Mechanical Hydraulic System Based on ANSYS Workbench

Data publikacji: 05 lip 2024

Zakres stron: -

Otrzymano: 22 lut 2024

Przyjęty: 17 maj 2024

DOI: https://doi.org/10.2478/amns-2024-1670

Słowa kluczowe
ANSYS Workbench, Piping system, Fluid-solid coupling method, Mechanical-hydraulic system

© 2024 Yiyue Zhang., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Design and Optimization Analysis of Mechanical Hydraulic System Based on ANSYS Workbench

Data publikacji: 05 lip 2024

Zakres stron: -

Otrzymano: 22 lut 2024

Przyjęty: 17 maj 2024

DOI: https://doi.org/10.2478/amns-2024-1670

Słowa kluczoweANSYS Workbench, Piping system, Fluid-solid coupling method, Mechanical-hydraulic system

© 2024 Yiyue Zhang., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Słowa kluczowe
ANSYS Workbench, Piping system, Fluid-solid coupling method, Mechanical-hydraulic system