<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The existing control strategies for subway construction struggle to address the challenges posed by the impact of large-diameter shield-driven underpass subway tunnels on soil settlement. In this paper, based on the mechanism of ground settlement of the shield tunnel under the KNX method, the influence of the underpass tunnel on the existing tunnel and its surrounding soil stress-strain characteristics is calculated by the Peck superposition method. The KNX method is optimized by optimizing the ratio of KNX slurry and the grouting pressure to control the existing tunnel and the ground settlement. The geotechnical general finite element analysis software is being introduced to conduct numerical simulation and engineering application experiments to verify its effectiveness. The results show that when the bonding force of the grouting material is 350Pa-s, the maximum value of the variation is 3.91mm, and the mobility is more suitable, which can effectively fill the void of the shield machine and reduce the settlement of the foundation. When the grouting pressure is 280kN/m<sup>2</sup>, the maximum contraction of the tunnel is 6.25mm, which can ensure the safety of the existing tunnel on the basis of the tunnel so that the actual settlement of the soil in the tunnel is minimized. Comprehensively, the optimization of the ratio of the KNP method in the control of the deformation characteristics of the soil and structures under the shield tunnel has effectiveness and can effectively provide theoretical and technical guidance for the construction of subway tunnels under the large-diameter shield under the subway.</p>
</abstract>

The existing control strategies for subway construction struggle to address the challenges posed by the impact of large-diameter shield-driven underpass subway tunnels on soil settlement. In this paper, based on the mechanism of ground settlement of the shield tunnel under the KNX method, the influence of the underpass tunnel on the existing tunnel and its surrounding soil stress-strain characteristics is calculated by the Peck superposition method. The KNX method is optimized by optimizing the ratio of KNX slurry and the grouting pressure to control the existing tunnel and the ground settlement. The geotechnical general finite element analysis software is being introduced to conduct numerical simulation and engineering application experiments to verify its effectiveness. The results show that when the bonding force of the grouting material is 350Pa-s, the maximum value of the variation is 3.91mm, and the mobility is more suitable, which can effectively fill the void of the shield machine and reduce the settlement of the foundation. When the grouting pressure is 280kN/m2, the maximum contraction of the tunnel is 6.25mm, which can ensure the safety of the existing tunnel on the basis of the tunnel so that the actual settlement of the soil in the tunnel is minimized. Comprehensively, the optimization of the ratio of the KNP method in the control of the deformation characteristics of the soil and structures under the shield tunnel has effectiveness and can effectively provide theoretical and technical guidance for the construction of subway tunnels under the large-diameter shield under the subway.

Modeling of the accurate application of the Kernel Efficiency Method in the proportioning process of shield tunnel construction

Applied Mathematics and Nonlinear Sciences

This work is licensed under the Creative Commons Attribution 4.0 International License.

The existing control strategies for subway construction struggle to address the challenges posed by the impact of large-diameter shield-driven underpass subway...

Modeling of the accurate application of the Kernel Efficiency Method in the proportioning process of shield tunnel construction

Data publikacji: 03 cze 2024

Zakres stron: -

Otrzymano: 08 lut 2024

Przyjęty: 19 kwi 2024

DOI: https://doi.org/10.2478/amns-2024-1337

Słowa kluczowe
Soil settlement, Peck’s superposition method, Kernel effect method, Shield tunnel, Stress-strain characteristics

© 2024 Yangxin Wang, et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Modeling of the accurate application of the Kernel Efficiency Method in the proportioning process of shield tunnel construction

Data publikacji: 03 cze 2024

Zakres stron: -

Otrzymano: 08 lut 2024

Przyjęty: 19 kwi 2024

DOI: https://doi.org/10.2478/amns-2024-1337

Słowa kluczoweSoil settlement, Peck’s superposition method, Kernel effect method, Shield tunnel, Stress-strain characteristics

© 2024 Yangxin Wang, et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 International License.

Słowa kluczowe
Soil settlement, Peck’s superposition method, Kernel effect method, Shield tunnel, Stress-strain characteristics