Mechanism of grain refinement in FSW joints of 6063-T6 aluminum alloy under different rotational speeds

[1] Min, D. (2019). Ultrasonic semi-solid soldering 6061 aluminum alloys joint with sn-9zn solder reinforced with nano/nano + micron al2o3 particles. Ultrasonics sonochemistry(52-), 52. Search in Google Scholar

[2] Tang, Y., Takizawa, Y., Yumoto, M., Otagiri, Y., & Horita, Z. (2020). Achieving grain refinement of upsized al–3mg–0.2sc (mass%) round rods using multi-pass high-pressure sliding (mp-hps). MATERIALS TRANSACTIONS. Search in Google Scholar

[3] Wang, Lei, Wei, Yanhong, Zhao, & Wenyong, et al. (2018). Effects of welding parameters on microstructures and mechanical properties of disk laser beam welded 2a14-t6 aluminum alloy joint. Journal of Manufacturing Processes. Search in Google Scholar

[4] Ghiasvand, A., Yavari, M. M., Jacek Tomków, Guerrero, J. W. G., Kheradmandan, H., & Dorofeev, A., et al. (2021). Investigation of mechanical and microstructural properties of welded specimens of aa6061-t6 alloy with friction stir welding and parallel friction stir welding methods. Materials(20). Search in Google Scholar

[5] Zhang, P., Zhao, S., Zhang, C., Chen, Z., Zhang, J., & Fei, L., et al. (2022). Microstructure and mechanical properties of probeless friction stir extrusion joined joints of 6061-t6 aluminum alloy to q235 steel. The International Journal of Advanced Manufacturing Technology, 119(5), 3029-3043. Search in Google Scholar

[6] Li, Z., Yu, H., & Sun, D. (2021). The tribocorrosion mechanism of aluminum alloy 7075-t6 in the deep ocean. Corrosion Science, 183(3), 109306. Search in Google Scholar

[7] Abdollahzadeh, A.Shokuhfar, A.Cabrera, J. M.Zhilyaev, A. P.Omidvar, H. (2019). In-situ nanocomposite in friction stir welding of 6061-t6 aluminum alloy to az31 magnesium alloy. Journal of Materials Processing Technology, 263. Search in Google Scholar

[8] Wang, H. F., Zuo, D. W., Liu, S. R., Pu, J. F., & Song, W. W. (2020). Wear resistance analysis of a lightweight aluminum alloy sheet friction stir joint area. Strength of Materials, 52(4), 565-572. Search in Google Scholar

[9] Bingjie, Z., Yuting, L., Yang, D., Liqiang, W., & Weijie, L. (2018). The grain refinement mechanisms of various phases in shot-peened nickel-aluminum bronze (nab) alloy. Materials Characterization, 144, 77-85. Search in Google Scholar

[10] Lu, D., You, G., Luo, J., Ding, Y., & Tong, X. (2020). Effects of rotational speed on microstructure and mechanical properties of inertia friction-welded 7005–5083 aluminum alloy joints. Journal of Materials Science, 55(26). Search in Google Scholar

[11] Ji, F., Wang, Z., Wu, L., Luo, K., & Lu, J. (2022). Strain rate dependence of tensile properties and strengthening mechanism of ti6al4v alloy undergoing different coverage layers of laser shock peening. Surface & Coatings Technology. Search in Google Scholar

[12] Zhang, K., Hu, R., Li, J., Yang, J., & Gao, Z. (2020). Grain refinement of 1 at.% ta-containing cast tial-based alloy by cyclic air-cooling heat treatment. Materials Letters, 274, 127940. Search in Google Scholar

[13] Li, Y., Wang, Y., Chen, J., Chae, L. Y., & Feng, Z. (2024). Surface grain refinement of casting a380 aluminum alloy by ultrasonic-assisted surface mechanical grinding treatment. Materials Letters(Jan.1), 354. Search in Google Scholar

[14] Qiu, Y., Yang, X., Xu, J., Li, J., Xiang, S., & Chen, Z., et al. (2022). Enhanced mechanical property and corrosion resistance of alloy 5182 fsw joints by sc and zr alloying. Materials Characterization. Search in Google Scholar

[15] Silva, R. P., Soares, R., Neto, R., Reis, A., Paiva, R., & Madureira, R., et al. (2022). Grain refinement of inconel 718 superalloy-the effect of rotating magnetic field. Materials (Basel, Switzerland), 15(6). Search in Google Scholar

[16] Prasad, A., Mok, J., Lafortune, L., & Bichler, L. (2018). Grain refinement of b319 alloy using spark plasma sintered al–ti–c grain refiners. Transactions of the Indian Institute of Metals, 71(11), 2759-2763. Search in Google Scholar

[17] C, W. W. A. B., B, S. Y. A., B, K. Q. A., B, K. W. A., B, S. Z. A., & B, P. P. A., et al. (2021). Microstructure and nanomechanical behavior of friction stir welded joint of 7055 aluminum alloy. Journal of Manufacturing Processes, 61, 311-321. Search in Google Scholar

[18] Fu, L., Duan, H., Li, H., Lin, L., Wang, Q., & Yao, J., et al. (2020). Low-cycle fatigue behavior of 7075-t6 aluminum alloy at different strain amplitudes. Materials Express. Search in Google Scholar

[19] Liao, Z., Polyakov, M., Diaz, O. G., Axinte, D., & Hardy, M. (2019). Grain refinement mechanism of nickel-based superalloy by severe plastic deformation - mechanical machining case. Acta Materialia, 180. Search in Google Scholar

[20] Su, M. L., Qi, X. Y., Xu, L. Y., Feng, Q., Han, Y. D., & Zhao, L. (2022). Microstructural and mechanical analysis of 6063-t6 aluminum alloy joints bonded by friction stir welding. Journal of Materials Science, 57(31), 15078-15093. Search in Google Scholar

[21] Li, J. Z. F. (2018). Effect of rotation speed on friction behavior of rotary friction welding of aa6061-t6 aluminum alloy. Journal of neurosurgical sciences, 62(5). Search in Google Scholar

[22] Li, D., & Wang, X. (2021). The effect of plug rotation speed on micro-structure of nugget zone of friction plug repair welding joint for 6082 aluminum alloy. Materials (Basel, Switzerland), 14(18). Search in Google Scholar

[23] Senwei, W., Kunming, Z., Sihui, O., Chengao, D., Xiong, W., & Aitao, T., et al. (2023). Grain refinement and mechanical properties of az31 alloy processed by pre-die forging extrusion at different temperatures. Journal of Materials Engineering and Performance(23), 32. Search in Google Scholar

[24] Pu, J., Bondarev, S., Wang, H., Song, W., Liu, S., & Jiang, D. (2023). Analysis of microstructure and wear resistance of friction stir welded joints of 7075-t6 aluminum alloy. Ferroelectrics. Search in Google Scholar

[25] Wang, H., An, H., & Yang, S. (2021). Grain refinement mechanism of rapidly solidified nickel alloys. International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde). Search in Google Scholar

[26] Ozan, S. (2020). Effect of friction stir welding on the microstructure and mechanical properties of aa 6063-t6 aluminum alloy. Materialwissenschaft und Werkstofftechnik, 51(8). Search in Google Scholar