Research of Dynamic Processes in an Anvil During a Collision with a Sample
Yuriy Pyr’yev
Faculty of Mechanical and Industrial Engineering, Institute of Mechanics and Printing, Department of Printing Technologies, Warsaw University of TechnologyWarsaw, Poland
Profil OrcidWyszukaj tego autora
, Andrzej Penkul
Faculty of Mechanical and Industrial Engineering, Institute of Mechanics and Printing, Department of Mechanics and Weaponry Technology, Warsaw University of TechnologyWarsaw, Poland
Profil OrcidWyszukaj tego autora
oraz Leszek Cybula
Faculty of Mechanical and Industrial Engineering, Institute of Mechanics and Printing, Department of Mechanics and Weaponry Technology, Warsaw University of TechnologyWarsaw, Poland
Profil OrcidWyszukaj tego autora
15 lut 2023
O artykule
Data publikacji: 15 lut 2023
Zakres stron: 104 - 111
Otrzymano: 03 paź 2022
Przyjęty: 18 gru 2022
DOI: https://doi.org/10.2478/ama-2023-0012
Słowa kluczowe
© 2023 Yuriy Pyr’yev et al., published by Sciendo
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.
The paper concerns modelling the dynamics of the contact system of the tested sample with an elastic half-space (anvil) during their collision. The original elements in the paper include the proposed general approach to solving the problem of contact dynamics. The presented approach consists in determining the force of impact on the sample during the collision and the joint solution of the problem for the tested sample and the problem for an elastic semi-space under the conditions of the assumptions of Hertz’s theory. The resulting interaction forces allow the determination of displacements and stresses.