<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This paper reports experimental research of torques during paperboard cutting in the die cutting press with the screw–nut transmission in the drive mechanism of the movable pressure plate. The purpose of the study is to substantiate the practical implementation of the pressure plate drive mechanism with the use of screw–nut transmission for the production of cartons of paperboard blanks. The manufactured experimental bench for the research of paperboard blanks provides the possibility of getting dependencies of loads on different parameters of the die cutting process. The developed method of the experimental research envisages the use of the strain gauge method and the wireless module for data measurement and software for its processing that allow getting trustworthy results with minimum faults. As a result of experimental research studies, the impact of paperboard thickness and cutting velocity on torque values has been established. Results of experimental research allow getting trustworthy and systematised information about torque values depending on the thickness of the paperboard, the paperboard fibre direction and pressure plate displacement velocity. It is established that torque values on drive shaft during die cutting of paperboard blanks made of folding boxboard with thickness that lay in range of 0.3–0.7 mm. Experimental research studies show the impact of rotation speed of a drive shaft of the pressure plate drive mechanism on the torque value. The article shows the workability of the designed device with screw–nut transmission in the drive mechanism of a movable pressure plate.</p>
</abstract>

This paper reports experimental research of torques during paperboard cutting in the die cutting press with the screw–nut transmission in the drive mechanism of the movable pressure plate. The purpose of the study is to substantiate the practical implementation of the pressure plate drive mechanism with the use of screw–nut transmission for the production of cartons of paperboard blanks. The manufactured experimental bench for the research of paperboard blanks provides the possibility of getting dependencies of loads on different parameters of the die cutting process. The developed method of the experimental research envisages the use of the strain gauge method and the wireless module for data measurement and software for its processing that allow getting trustworthy results with minimum faults. As a result of experimental research studies, the impact of paperboard thickness and cutting velocity on torque values has been established. Results of experimental research allow getting trustworthy and systematised information about torque values depending on the thickness of the paperboard, the paperboard fibre direction and pressure plate displacement velocity. It is established that torque values on drive shaft during die cutting of paperboard blanks made of folding boxboard with thickness that lay in range of 0.3–0.7 mm. Experimental research studies show the impact of rotation speed of a drive shaft of the pressure plate drive mechanism on the torque value. The article shows the workability of the designed device with screw–nut transmission in the drive mechanism of a movable pressure plate.

Experimental Research of Paperboard Cutting in Die Cutting Press with the Screw–Nut Transmission of Drive Mechanism of a Movable Pressure Plate

Faculty of Computer Printing Engineering, Department of Computerized Complexes of Printing and Packaging Industries

Acta Mechanica et Automatica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

This paper reports experimental research of torques during paperboard cutting in the die cutting press with the screw–nut transmission in the drive mechanism...

Experimental Research of Paperboard Cutting in Die Cutting Press with the Screw–Nut Transmission of Drive Mechanism of a Movable Pressure Plate

Data publikacji: 27 wrz 2021

Zakres stron: 122 - 131

Otrzymano: 14 lut 2021

Przyjęty: 25 cze 2021

DOI: https://doi.org/10.2478/ama-2021-0017

Słowa kluczowe
die cutting press, pressure plate, screw–nut transmission, leadscrew, ball screw, cutting knife, die cutting forme, paperboard blank, torque

© 2021 Serhii Ternytskyi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Experimental Research of Paperboard Cutting in Die Cutting Press with the Screw–Nut Transmission of Drive Mechanism of a Movable Pressure Plate

Data publikacji: 27 wrz 2021

Zakres stron: 122 - 131

Otrzymano: 14 lut 2021

Przyjęty: 25 cze 2021

DOI: https://doi.org/10.2478/ama-2021-0017

Słowa kluczowedie cutting press, pressure plate, screw–nut transmission, leadscrew, ball screw, cutting knife, die cutting forme, paperboard blank, torque

© 2021 Serhii Ternytskyi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
die cutting press, pressure plate, screw–nut transmission, leadscrew, ball screw, cutting knife, die cutting forme, paperboard blank, torque