[
1. Bajpaj P., Kahraman A., Anderson N.E. (2004), A surface wear prediction methodology for parallel-axis gear pairs, Journal of Tribology, 126, 597–605.10.1115/1.1691433
]Search in Google Scholar
[
2. Bobach L., Beilicke R., Bartel D., Deters L. (2012), Thermal elastohydrodynamic simulation of involute spur gears incorporating mixed friction, Tribology International, 48, 191–206.10.1016/j.triboint.2011.11.025
]Search in Google Scholar
[
3. Bongaerts J. H. H., Day J. P. R., Marriott C.,. Pudney P. D. A, Williamson A.-M. (2018), In situ confocal Raman spectroscopy of lubricants in a soft elastohydrodynamic tribological contact, Journal of applied physics, 104, 014913.10.1063/1.2952054
]Search in Google Scholar
[
4. Brandão J.A., Seabra J.H.O., Castro J.D., Martins R. (2014), On the simulation of simultaneous fatigue and mild wear during a micro-pitting gear test, International Gear Conference: 26th–28th August 2014, Lyon, P. 523–531.
]Search in Google Scholar
[
5. Brauer J., Andersson S. (2003), Simulation of wear in gears with flank interference – a mixed FE and analytical approach, Wear, 254, 1216–1232.10.1016/S0043-1648(03)00338-7
]Search in Google Scholar
[
6. Bravo A., Koffi D., Toubal L., Erchiqui F. (2015), Life and damage mode modeling applied to plastic gears, Engineering Failure Analysis, 58, 1, 113–133.10.1016/j.engfailanal.2015.08.040
]Search in Google Scholar
[
7. Brethee K, Zhenc D., Gua F., Ball A (2017), Helical gear wear monitoring: Modelling and experimental validation, Mechanism and Machine Theory, 117, 210–229.10.1016/j.mechmachtheory.2017.07.012
]Search in Google Scholar
[
8. Cherepova T., Dmitrieva G., Tisov O., Dukhota O., Kindrachuk M. (2018), Research on the properties of Co-Tic and Ni-TiC hip-sintered alloys, Acta mechanica et automatica, 13, 1, 57–67.10.2478/ama-2019-0009
]Search in Google Scholar
[
9. Chernets M. (2019a), A method for predicting contact strength and life of archimedes and involute worm gears, considering the effect of wear and teeth correction, Tribology in Industry, 41, 1, 134–141.10.24874/ti.2019.41.01.15
]Search in Google Scholar
[
10. Chernets M. (2019b), Method of calculation of tribotechnical characteristics of the metal-polymer gear, reinforced with glass fiber, taking into account the correction of tooth, Eksploatacja i Niezawodnosc – Maintenance and Reliability, 21, 4, 546–552.10.17531/ein.2019.4.2
]Search in Google Scholar
[
11. Chernets M., Chernets Ju. (2017) The simulation of influence of engagement conditions and technological teeth correction on contact strength, wear and durability of cylindrical spur gear of electric locomotive, Proc. JMechE. Part J: Journal of Engineering Tribology, 231, 1, 57 – 62.
]Search in Google Scholar
[
12. Chernets M.V., Kelbinski J., Jarema R.Ja. (2011), Generalized method for the evaluation of cylindrical involute gears, Materials Science, 1, 45–51.10.1007/s11003-011-9366-9
]Search in Google Scholar
[
13. Chernets’ M.V., Lenik K. (1997), On estimation of materials durability, Materials science, 33, 834–840.10.1007/BF02355563
]Search in Google Scholar
[
14. Drozdov Ju. N. (1969), The calculation of gear trains wear resistance [In Russian], Mashinovedenie, 2, 84–88.
]Search in Google Scholar
[
15. Drozdov Ju. N. (1975), Development of wear calculation method and friction simulation [In Russian], Wear resistance, Science, Moscow, 120–135.
]Search in Google Scholar
[
16. Drozdov Ju.N., Nazhestkin B.P. (1990), The development of methods to calculate weaer of toothed wheels [In Russian], Engineering Gerald, 11, 15–17.
]Search in Google Scholar
[
17. Feng K., Borghesani P., Smith W. A., Randall R.B., Peng Z. (2019), Vibration-based updating of wear prediction for spur gears, Wear, 426–427, part B, 1410–1415.10.1016/j.wear.2019.01.017
]Search in Google Scholar
[
18. Flodin A. (2000) Wear of spur and helical gears. Dissertations and Theses, UMJ Dissertations Publishing.
]Search in Google Scholar
[
19. Flodin A., Andersson S. (1997), Simulation of mild wear in spur gears, Wear, 207, 1–2, 16–23.10.1016/S0043-1648(96)07467-4
]Search in Google Scholar
[
20. Flodin A., Andersson S. (1999), Wear simulation of spur gears, Lubrication science, 5(3), 225–250.10.1002/tt.3020050303
]Search in Google Scholar
[
21. Flodin A., Andersson S. (2000), Simulation of mild wear in helical gears, Wear, 241(2), 123–128.10.1016/S0043-1648(00)00384-7
]Search in Google Scholar
[
22. Flodin A., Andersson S. A (2000), Simplified model for wear prediction in helical gears, Wear, 249 (3–4), 285–292.10.1016/S0043-1648(01)00556-7
]Search in Google Scholar
[
23. Gębura A., Kłysz S., Tokarski T. (2019), Monitoring wear of gear wheel of helicopter transmission using the FAM-C and FDM-A methods, Procedia Structural Integrity, 16, 184–191.10.1016/j.prostr.2019.07.039
]Search in Google Scholar
[
24. Gorokh G., M.I.Pashechko M., Borc J., Lozovenko A., Kashko I., Latos A. (2018), Matrix coatings based on anodic alumina with carbon nanostructures in the pores, Applied surface science, 433, 1, 829–835.10.1016/j.apsusc.2017.10.117
]Search in Google Scholar
[
25. Greco A.C., Erck R., Ajayi O., Fenske G. (2011), Effect of reinforcement morphology on high-speed sliding friction and wear of PEEK polymers, Wear, 271, 9–10, 2222–2229.10.1016/j.wear.2011.01.065
]Search in Google Scholar
[
26. Grib V.V. (1982), Solwing of tribotechnical problems by numerical methods [In Russian], Science, Noscow.
]Search in Google Scholar
[
27. Guilbault R., Lalonde S. (2019), A stochastic prediction of roughness evolution in dynamic contact modelling applied to gear mild wear and contact fatigue, Tribology International, 140, 10585410.1016/j.triboint.2019.105854
]Search in Google Scholar
[
28. Hegadekatte V., Hilgert J., Kraft O., Huber N. (2010), Multi time scale simulations for wear prediction in micro-gears, Wear, 268, 316–32410.1016/j.wear.2009.08.017
]Search in Google Scholar
[
29. Kahraman A., Bajpaj P., Anderson N.E. (2005), Influence of tooth profile deviations on helical gear wear, Journal of mechanical design, 127, 4, 656–663.10.1115/1.1899688
]Search in Google Scholar
[
30. Kindrachuk M., Volchenko A,. Volchenko D, Volchenko N., Poliakov P., Tisov O., Kornienko A. (2019b) Polymeres with enhanced energy capacity modified by semiconductor materials, Functional materials, 26, 3, 629–634.10.15407/fm26.03.629
]Search in Google Scholar
[
31. Kindrachuk M.V., Volchenko O.I., Volchenko D.O., Volchenko N.O., Polyakov P.A., Kornienko A.O., Yurchuk A.O. (2019a), Polymeric Materials Modified by Semiconductor Substances in Friction Units of Braking Devices, Journal on nano- and electronic physics, 11, 3, 03014.10.21272/jnep.11(3).03014
]Search in Google Scholar
[
32. Kindrachuk V., Galanov B. (2014), An efficient approach for numerical treatment of some inequalities in solid mechanics on examples of Kuhn–Tucker and Signorini–Fichera conditions, Journal of the Mechanics and Physics of Solids, 63, 432–450.10.1016/j.jmps.2013.08.008
]Search in Google Scholar
[
33. Kolivand M., Kahraman A. (2010), An ease-off based method for loaded tooth contact analysis of hypoid gears having local and global surface deviations, Journal of mechanical design, 132, 7, 071004.10.1115/1.4001722
]Search in Google Scholar
[
34. Kurdi A, Hongjian Wang H, Chang L. (2018), Effect of nano-sized TiO2 addition on tribological behaviour of poly ether ether ketone composite, Tribology International, 117, 225–235.10.1016/j.triboint.2017.09.002
]Search in Google Scholar
[
35. Liu H., Liu H., Zhu C., Tang J. (2020), Study on gear contact fatigue failure competition mechanism considering tooth wear evolution, Tribology International, 147, 106277 (Journal pre-proof).10.1016/j.triboint.2020.106277
]Search in Google Scholar
[
36. Liu, X., Yang, Y., Zhang, J. (2016), Investigation on coupling effects between surface wear and dynamics in a spur gear system, Tribology International, 101, 383–394.10.1016/j.triboint.2016.05.006
]Search in Google Scholar
[
37. Mao K. (2007), Gear tooth contact analysis and its application in the redaction of fatigue wear, Wear, 262, 11/12, 1281–1288.10.1016/j.wear.2006.06.019
]Search in Google Scholar
[
38. Pashechko M., Krzysztof Dziedzic K., Mendyk E., Jerzy Jozwik J. (2018), Chemical and phase composition of the friction surfaces Fe– Mn–C–B–Si–Ni–Cr hardfacing coatings, Journal of tribology, 140(2), 021302.10.1115/1.4037953
]Search in Google Scholar
[
39. Pasta A., Mariotti Virzi G. (2007), Finite element method analysis of a spur gear with a corrected profile, Journal of strain analysis, 42, 281–292.10.1243/03093247JSA284
]Search in Google Scholar
[
40. Pronikov A. S. (1978), Reliability of machines [In Russian], Machine engineering, Moscow.
]Search in Google Scholar
[
41. Raadnui S. (2019) Spur gear wear analysis as applied for tribological based predictive maintenance diagnostics, Wear, 268, 316–324.10.1016/j.wear.2018.12.088
]Search in Google Scholar
[
42. Wang H., Zhou C., Leia Y., Liu Z. (2019), An adhesive wear model for helical gears in line-contact mixed elastohydrodynamic lubrication, Wear, 426–427, part A, 896–909.10.1016/j.wear.2019.01.104
]Search in Google Scholar
[
43. Wang, Y., Wang, Q. J. (2013), Stribeck Curves. Encyclopedia of Tribology, 3365–33150.10.1007/978-0-387-92897-5_148
]Search in Google Scholar
[
44. Wei J., Niu R., Dong Q., Zhang S. (2020), Fretting-slipping fatigue failure mode in planetary gear system, International Journal of Fatigue, 136, 105632.10.1016/j.ijfatigue.2020.105632
]Search in Google Scholar
[
45. Wu S., Cheng H.S. (1993), Sliding wear calculation in spur gears, Journal of Tribology, 115, 493–500.10.1115/1.2921665
]Search in Google Scholar
[
46. Zorkoa D, Kulovec S, Duhovnika J, Tavcar J. (2019), Durability and design parameters of a Steel/PEEK gear pair, Mechanisms and machine theory, 140, 825–846.10.1016/j.mechmachtheory.2019.07.001
]Search in Google Scholar
