This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.
İ. Özkul, M. A. Kurgun, E. Kalay, C. A. Canbay, and K. Aldaş, “Shape memory alloys phenomena: classification of the shape memory alloys production techniques and application fields,” Eur. Phys. J. Plus, vol. 134, no. 12, p. 585, 2019.Search in Google Scholar
K. Tanaka, S. Kobayashi, and Y. Sato, “Thermomechanics of transformation pseudoelasticity and shape memory effect in alloys,” Int. J. Plast., vol. 2, no. 1, pp. 59–72, 1986.Search in Google Scholar
V. Pushin, N. Kuranova, E. Marchenkova, and A. Pushin, “Design and development of Ti–Ni, Ni– Mn–Ga and Cu–Al–Ni-based alloys with high and low temperature shape memory effects,” Materials, vol. 12, no. 16, p. 2616, 2019.Search in Google Scholar
C. Velmurugan, V. Senthilkumar, S. Dinesh, and D. Arulkirubakaran, “Machining of NiTi-shape memory alloys-A review,” Mach. Sci. Technol., vol. 22, no. 3, pp. 355–401, May 2018, doi: 10.1080/10910344.2017.1365894.Search in Google Scholar
M. Kaftaranova, V. Hodorenko, S. Anikeev, N. Artyukhova, A. V. Shabalina, and V. Gunther, “Investigation of the effect of copper addition on physical and mechanical properties of TiNi-Cu porous alloy,” Metals, vol. 12, no. 10, p. 1696, 2022.Search in Google Scholar
S. U. Rehman et al., “Influence of Cu addition on transformation temperatures and thermal stability of TiNiPd high temperature shape memory alloys,” Proc. Inst. Mech. Eng. Part J. Mater. Des. Appl., vol. 233, no. 5, pp. 800–808, May 2019, doi: 10.1177/1464420717702679.Search in Google Scholar
M. Khan, H. Y. Kim, T. Nam, and S. Miyazaki, “Effect of Cu addition on the high temperature shape memory properties of Ti50Ni25Pd25 alloy,” J. Alloys Compd., vol. 577, pp. S383–S387, 2013.Search in Google Scholar
M. I. Khan, H. Y. Kim, and S. Miyazaki, “A Review of TiNiPdCu Alloy System for High Temperature Shape Memory Applications,” Shape Mem. Superelasticity, vol. 1, no. 2, pp. 85–106, 2015, doi: 10.1007/s40830-015-0019-y.Search in Google Scholar
M. I. Khan, H. Y. Kim, Y. Namigata, T. Nam, and S. Miyazaki, “Combined effects of work hardening and precipitation strengthening on the cyclic stability of TiNiPdCu-based high-temperature shape memory alloys,” Acta Mater., vol. 61, no. 13, pp. 4797–4810, 2013.Search in Google Scholar
S. ur Rehman, M. Khan, A. N. Khan, L. Ali, S. I. H. Jaffery, and M. Khurram, “Quaternary alloying of copper with Ti50Ni25Pd25 high temperature shape memory alloys,” Mater. Sci. Eng. A, vol. 763, p. 138148, 2019.Search in Google Scholar
R. Radhamani and M. Balakrishnan, “The effect of copper on phase transformation, microstructure and mechanical characterization of Ni50-x Ti50 Cux shape-memory alloy,” Proc. Inst. Mech. Eng. Part J. Mater. Des. Appl., vol. 237, no. 5, pp. 1137–1145, 2023, doi: 10.1177/14644207221137257.Search in Google Scholar
D. Kim, C. Park, J. Lee, K. Hong, Y. Park, and W. Lee, “Microstructure, shape memory behavior and mechanical properties of hot rolled Fe-17Mn-5Si-5Cr-4Ni-0.3 C-1Ti shape memory alloy,” Eng. Struct., vol. 239, p. 112300, 2021.Search in Google Scholar
J. Bhagyaraj, K. V. Ramaiah, C. N. Saikrishna, and S. K. Bhaumik, “Behavior and effect of Ti2Ni phase during processing of NiTi shape memory alloy wire from cast ingot,” J. Alloys Compd., vol. 581, pp. 344–351, 2013.Search in Google Scholar
G. Tadayyon et al., “Effect of different stages of deformation on the microstructure evolution of Ti-rich NiTi shape memory alloy,” Mater. Charact., vol. 125, pp. 51–66, 2017.Search in Google Scholar
H. Z. Lu et al., “Simultaneous enhancement of mechanical and shape memory properties by heat-treatment homogenization of Ti2Ni precipitates in TiNi shape memory alloy fabricated by selective laser melting,” J. Mater. Sci. Technol., vol. 101, pp. 205–216, 2022.Search in Google Scholar
Y. Chen, C. Ortiz Rios, B. McLain, J. W. Newkirk, and F. Liou, “TiNi-based Bi-metallic shape-memory alloy by laser-directed energy deposition,” Materials, vol. 15, no. 11, p. 3945, 2022.Search in Google Scholar
S. Ahmad et al., “Innovations in Additive Manufacturing of Shape Memory Alloys: Alloys, Microstructures, Treatments, Applications,” J. Mater. Res. Technol., vol. 32, pp. 4136-4197, 2024, https://www.sciencedirect.com/science/article/pii/S2238785424020052Search in Google Scholar
S. M. R. Varukuti, K. N. Chaithanya Kumar, and K. S. Suresh, “Effect of rolling temperature and annealing on grain refinement in TiNiCu shape memory alloys,” J. Mater. Eng. Perform., pp. 1–13, 2023.Search in Google Scholar
Y.-T. Hsu, C.-T. Wu, and C.-H. Chen, “Nanoscale-precipitate-strengthened (Ni, Cu)-rich TiNiCu shape memory alloy with stable superelasticity and elastocaloric performance,” J. Alloys Compd., vol. 997, p. 174937, 2024.Search in Google Scholar
M. Ebrahimi, S. Attarilar, C. Gode, S. R. Kandavalli, M. Shamsborhan, and Q. Wang, “Conceptual analysis on severe plastic deformation processes of shape memory alloys: mechanical properties and microstructure characterization,” Metals, vol. 13, no. 3, p. 447, 2023.Search in Google Scholar
S. ur Rehman, M. Khan, A. N. Khan, M. I. Khan, L. Ali, and S. H. I. Jaffery, “Effect of precipitation hardening and thermomechanical training on microstructure and shape memory properties of Ti50Ni15Pd25Cu10 high temperature shape memory alloys,” J. Alloys Compd., vol. 616, pp. 275–283, 2014.Search in Google Scholar
M. I. Khan, H. Y. Kim, T. Nam, and S. Miyazaki, “Formation of nanoscaled precipitates and their effects on the high-temperature shape-memory characteristics of a Ti50Ni15Pd25Cu10 alloy,” Acta Mater., vol. 60, no. 16, pp. 5900–5913, 2012.Search in Google Scholar
T. H. Nam, T. Saburi, and K. Shimizu, “Cu-content dependence of shape memory characteristics in Ti–Ni–Cu alloys,” Mater. Trans. JIM, vol. 31, no. 11, pp. 959–967, 1990.Search in Google Scholar
S. ur Rehman et al., “Transformation behavior and shape memory properties of Ti50Ni15Pd25Cu10 high temperature shape memory alloy at various aging temperatures,” Mater. Sci. Eng. A, vol. 619, pp. 171–179, 2014.Search in Google Scholar
