This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.
Bigaj M., Boczkal S., Żelechowski J., Gawlik M., Mitka M.: Heat treated AZ61 magnesium alloy obtained by direct extrusion and continuous rotary extrusion process. Arch. Metall. Mater. 2016, 61, 1, 405–410.Search in Google Scholar
Kumar, P., Ghosh, S. K., Barma, J. D., Saravanan, S., Kumar, J.: The joining of magnesium and aluminium alloys by inclined arrangement of explosive welding. Mater. Today Proc. 2023, 76, 536-541.Search in Google Scholar
Förster W., Binotsch, C., Awiszus, B.: Process Chain for the Production of a Bimetal Component from Mg with a Complete Al Cladding. Metals. 2018, 8(2), 97.Search in Google Scholar
Osakada, K., Limb, M., Mellor, P.B.: Hydrostatic extrusion of composite rods with hard cores. Int. J. Mech. Sci. 1973, 15, 291–307.Search in Google Scholar
Story, J.M., Avitzur, B., Hahn, W.C.: The effect of receiver pressure on the observed flow pattern in the hydrostatic extrusion of bimetal rods. ASME J. Eng. Ind. 1976, 98, 909–913.Search in Google Scholar
Avitzur, B., Wu, R., Talbert, S., Chou, Y.T.: An analytical approach to the problem of core fracture during extrusion of bimetal rods. ASME J. Eng. Ind. 1985, 107, 247–253.Search in Google Scholar
Kleiner, M., Schomäcker, M., Schikorra, M., Klaus, A.: Manufacture of extruded and continuously reinforced aluminum profiles for ultra-lightweight constructions. Mater. Werkst. 2004, 35, 431–439.Search in Google Scholar
Jang, D.H., Hwang, B.B.: Deformation Analysis of Co-Extrusion Process of Aluminum Alloy and Copper Alloy. Key Eng. Mater. 2007, 340, 645–648.Search in Google Scholar
Wang W., Politis N., Wang Y., Zhou X., Balint D., Jiang J.: Solid-state hot forge bonding of aluminium-steel bimetallic gears: Deformation mechanisms, microstructure and mechanical properties. Int. J. Mach. Tools Manuf. 2022, 180, 103930.Search in Google Scholar
Politis D.J., Lin J., Dean T.A.: Investigation of Material Flow in Forging Bi-metal Components. Steel Res. Inter. 2012, 231-234.Search in Google Scholar
Engelhardt, M., Grittner, N., Haverkamp, H., Reimche, W., Bormann, D., Bach, F.-W.: Extrusion of hybrid sheet metals. J. Mater. Process. Technol. 2012, 212, 1030–1038.Search in Google Scholar
Mondal M., Basak S., Das H., Hong S-T., Choi H., Park J-W, Han H.N.: Manufacturing of magnesium/aluminum bimetallic ring components by friction stir assisted simultaneous forging and solid-state joining. Int. J. Precis. Eng. Manuf. - Green Technol. 2021, 8, 1429–1438.Search in Google Scholar
Szota P., Mroz S., Gontarz A., Stefanik A.: Theoretical and Experimental Analysis of Mg/Al Bimetallic Handle Forging Process. Arch. Metall. Mater. 2019, 64.Search in Google Scholar
Feuerhack, A., Binotsch, C., Awiszus, A.: Formability of hybrid aluminum-magnesium compounds. Key Eng. Mater. 2013, 554, 21–28.Search in Google Scholar
Barati F., Barat E.: Determining of Flow Curve of Magnesium AZ61 Alloy Using Ring Test. Int. J. Mech. Prod.Eng. 2015, 5(3), 40-43.Search in Google Scholar
Negendank M., Mueller S., Reimers W.: Coextrusion of Mg–Al macro composites. J. Mater. Process. Technol. 2012, 212, 1954–1962.Search in Google Scholar
Priel E., Ungarish Z., Navi N.U.: Co-extrusion of a Mg/Al composite billet: A computational study validated by experiments. J. Mater. Process. Technol. 2016, 236, 103–113.Search in Google Scholar
Paramsothy M., Srikanth N., Gupta M.: Solidification processed Mg/Al bimetal macrocomposite: Microstructure and mechanical properties. J. Alloys Compd. 2008, 461, 200–208.Search in Google Scholar
Kong T.F., Chan L.C., Lee T.C.: Experimental Study of Effects of Process Parameters in Forge-Welding Bimetallic Materials: AISI 316L Stainless Steel and 6063 Aluminium Alloy. Strain. 45, 4, 2009.Search in Google Scholar
Skubisz P., Sinczak J., Bednarek S.: Forgeability of Mg–Al–Zn magnesium alloys in hot and warm closed die forging. J. Mater. Process. Technol. 177, 2006, 210–213.Search in Google Scholar
Bajor T., Krakowiak M., Szota P.: Numerical Analysis of AZ61 Magnesium Alloy Extrusion Process by Modified Equal Channel Angular Extrusion (Ecae) Method, Metalurgija 53(4), 485-488, 2014.Search in Google Scholar
Bressan J.D., Martins M.M., Button S.T.: Aluminium Extrusion Analysis By The Finite Volume Method, XII International Conference on Computational Plasticity. Fundamentals and Applications (COMPLAS 2013), Barcelona, 3-5 September, 2013.Search in Google Scholar
Feuerhack A., Binotsch C., Awiszus B., Wolff A., Brämer C., Stockmann M.: Materialeigenschaften und Formänderungsvermögen von stranggepressten Al-Mg-Verbunden in Abhängigkeit der Temperatur. Materwiss Werksttech. 43, 2012, 601-608Search in Google Scholar
Politis D.J., Lin J., Dean T.A., Balint D.S.: An investigation into the forging of Bi-metal gears, J. Mater. Proc. Technol. 2014, 214, 2248-2260Search in Google Scholar
Kittner K.: Integrativer Modellansatz bei der Co-Extrusion von Aluminium-Magnesium Verbunden, PhD thesis, TU Chemnitz, Germany, 2012.Search in Google Scholar
Hu C., Wang K., Liu Q.: Study on a new technological scheme for cold forging of spur gears. J. Mater. Proc. Technol. 2007, 187, 600–603.Search in Google Scholar
Osakada K., Wang X., Hanami S.: Precision forging of spline by flashless die forging with axially driven die. CIRP Ann. - Manuf. Technol. 1997, 46(1), 209–212.Search in Google Scholar