[1. Bilmes P. D., Solari M., Llorente C.L.: Characteristics and effects of austenite resulting from tempering of 13Cr-NiMo martensitic steel weld metals. Materials Characterization 46 (2001) 285–296.10.1016/S1044-5803(00)00099-1]Search in Google Scholar
[2. Antony K.C.: Aging Reactions in Precipitation Hardenable Stainless Steel. Metall. J. 15 (1963) 1595-1605.10.1007/BF03397271]Search in Google Scholar
[3. Murayama M., Katayama Y., Hono K.: Microstructural evolution in a 17-4 PH stainless steel after aging at 400 °C. Metallurgical and Material Transations A 30/2 (1999) 345–353.10.1007/s11661-999-0323-2]Search in Google Scholar
[4. http://www.aksteel.com/pdf/markets_products/stainless/precipitation/17-4_ph_data_sheet.pdf, 11.06.2015.]Search in Google Scholar
[5. Ziewiec A., Zielińska–Lipiec A., Tasak E.: Microstructure of welded joints of X5CrNiCuNb16-4 (17-4 PH) martensitic stainless steel after heat treatment. Archives of Metallurgy and Materials 59/3 (2014) 965–970.10.2478/amm-2014-0162]Search in Google Scholar
[6. Song Y., Li X., Rong L. and Li Y.: Anomalous phase transformation from martensite to austenite in Fe-13%Cr-4%Ni-Mo martensitic stainless steel. Journal of Materials Science and Technology 26/9 (2010) 823-826.10.1016/S1005-0302(10)60131-4]Search in Google Scholar
[7. Schönbauer B. M., Yanase K., Endo M.: The influence of various types of small defects on the fatigue limit of precipitation-hardened 17-4PH stainless steel. Theoretical and Applied Fracture Mechanics 87 (2017) 35-49.10.1016/j.tafmec.2016.10.003]Search in Google Scholar
[8. Tavares S. S. M., Machado C. L. C., Oliveira I. G., Martins, T. R. B. Masoumi M.: Damage associated with the interaction between hydrogen and microstructure in a high sulfur 17-4PH steel for studs. Engineering Failure Analysis, 82 (2017) 642-647.10.1016/j.engfailanal.2017.05.004]Search in Google Scholar
[9. Daoxin D. L., Xiaohua L., Chengsong Z., Ao L. N.: Surface nanocrystallization of 17-4 precipitation-hardening stainless steel subjected to ultrasonic surface rolling process. Materials Science and Engineering A 726 (2018) 69-81.10.1016/j.msea.2018.04.033]Search in Google Scholar
[10. Bhadeshia H. K. D. H. and Edmonds D. V.: The Distribution of retained austenite in martensite and the influence of inter-lath crystallography, Proc. 3rd Int. Conf. On Martensitic Transformation, Cambridge, Massachusetts, U.S.A., 1979, 28-33.]Search in Google Scholar
[11. Sha W., Cerezo and Smith G. D. W.: Phase chemistry and precipitation reactions in maraging steels: Part I. Introduction and study of Co-containing C-300 steel, Metallurgical and Material Transations A 24 (1993) 1221-1232.10.1007/BF02668190]Search in Google Scholar
[12. Leem D.S., Lee Y.D., Jun J.H. and Choi C. S.: Amount of retained austenite at room temperature after reverse transformation of martensite to austenite in an Fe–13% Cr–7% Ni–3% Si martensitic stainless steel. Scripta Materialia 45 (2001) 772.10.1016/S1359-6462(01)01093-4]Search in Google Scholar
[13. Rao V.N. and Thomas G.: Proc. 3rd Int. Conf. On Martensitic Transformation, Cambridge, Massachusetts, U.S.A., 1979, 12-13.]Search in Google Scholar
[14. Kowalska J., Ratuszek W., Witkowska M., Zielińska–Lipiec A., Development of microstructure and texture in Fe-26Mn-3Si-3Al alloy during cold-rolling and annealing. Journal of Alloys and Compounds 615 (2014) 583–586.10.1016/j.jallcom.2013.12.059]Search in Google Scholar
[15. Kowalska J., Ratuszek W., Chruściel K.: Crystallographic relations between deformation and annealing texture in austenitic steels. Archives of Metallurgy and Materials 53/1 (2008) 131–137.]Search in Google Scholar
[16. Witkowska M., Zielińska-Lipiec A., Kowalska J., W. Ratuszek, Microstructural Changes in a High-Manganese Austenitic Fe-Mn-Al-C Steel, Archives of Metallurgy and Materials 59 (2014) 971–975.10.2478/amm-2014-0163]Search in Google Scholar
[17. Das C. R. et al: Weldability of 17-4PH stainless steel in overaged heat treated condition. Science and Technology of Welding and Joining 11 (2006) 502-508.10.1179/174329306X148147]Search in Google Scholar
[18. Tuz L.: Evaluation of Microstructure and Selected Mechanical Properties of Laser Beam Welded S690QL High-Strength Steel. Advances in Materials Science, 3/18 (2018) 34-42, https://doi.org/10.1515/adms-2017-0039.10.1515/adms-2017-0039]Search in Google Scholar
[19. Pańcikiewicz K.: Structure and Properties of Welded Joints of 7CrMoVTiB10-10 (T24) Steel. Advances in Materials Science, 1/18 (2018) 37-47, https://doi.org/10.1515/adms-2017-0026.10.1515/adms-2017-0026]Search in Google Scholar
[20. Tavakoli Shoushtari M. R., Moayed M. H. and Davoodi A.: Post-weld heat treatment influence on galvanic corrosion of GTAW of 17-4PH stainless steel in 3·5%NaCl Corrosion Engineering Science Technology 46 (2011) 415-424.10.1179/174327809X409259]Search in Google Scholar
[21. Sun Y., Hebert R. J., Aindow M.: Effect of heat treatments on microstructural evolution of additively manufactured and wrought 17-4PH stainless steel, Materials and Design, 156 (2018) 429-440.10.1016/j.matdes.2018.07.015]Search in Google Scholar
[22. Mudali Kamachi U., Bhaduri A. K., Gnanamoorthy J. B.: Localised corrosion behaviour of 17–4 PH stainless steel. Materials Science and Technology 6 (1990) 475-481.10.1179/mst.1990.6.5.475]Search in Google Scholar
[23. Jui-Hung W., Chih-Kuang L.: Effect of strain rate on high-temperature low-cycle fatigue of 17-4 PH stainless steels Materials Science and Engineering A 390 (2005) 291–298.10.1016/j.msea.2004.08.063]Search in Google Scholar
[24. Viswanathan U. K., Banerjee S., Krishnan R.: Effects of aging on the microstructure of 17-4 PH stainless steel. Materials Science and Engineering A 104 (1988) 181-189.10.1016/0025-5416(88)90420-X]Search in Google Scholar
[25. Chung C.-Y., Tzeng Y. C.: Effects of aging treatment on the precipitation behavior of ε-Cu phase and mechanical properties of metal injection molding 17-4PH stainless steel. Materials Letters 237 (2019), 228-231.10.1016/j.matlet.2018.11.107]Search in Google Scholar
[26. Matlack K. H., Bradley H. A., Thiele S., Kim J. Y., Wall J. J., Hee Joon Jung, Jianmin Qu, Laurence J. Jacobs. Nonlinear ultrasonic characterization of precipitation in 17-4PH stainless steel. NDT&E International 71, April (2015), 8-15.10.1016/j.ndteint.2014.11.001]Search in Google Scholar
[27. Yeli G., Auger M. A., Wilford K., Smith G. D.W., Bagot P. A.J., Moody M. P., Sequential nucleation of phases in a 17-4PH steel: Microstructural characterization and mechanical properties. Acta Materialia 125 (2017) 38-49.10.1016/j.actamat.2016.11.052]Search in Google Scholar
[28. McWilliams B., Pramanik B., Kudzal A., Taggart-Scarff J., High strain rate compressive deformation behavior of an additively manufactured stainless steel, Additive Manufacturing 24 (2018) 432-439.10.1016/j.addma.2018.09.016]Search in Google Scholar
[29. Ziewiec A., Tasak E., Czech J.: Cracking of welded joints of the 17-4PH stainless martensitic steel precipitation hardened with copper, Archives of Metallurgy and Materials 50 (2012) 1055-1061.10.2478/v10172-012-0117-1]Search in Google Scholar
[30. Trzepieciński T., Pieja T., Malinowski T., Smusz R., Motyka M.: Investigation of 17-4PH steel microstructure and conditions of elevated temperature forming of turbine engine strut. Journal of Materials Processing Technology 252 (2018) 191-200.10.1016/j.jmatprotec.2017.09.026]Search in Google Scholar
[31. Hu Z., Zhu H., Zhang H., Zeng X.: Experimental investigation on selective laser melting of 17-4PH stainless steel. Optics and Laser Technology, 87 (2017) 17-2510.1016/j.optlastec.2016.07.012]Search in Google Scholar
[32. Lo C. H., Shek K. H., Lai J. K. L: Recent developments in stainless steels. Materials Science and Engineering R 65 (2009) 39–104.10.1016/j.mser.2009.03.001]Search in Google Scholar
[33. Ridley N., Stuart H., Zwell L.: Lattice parameter of Fe–C austenites at room temperature. Transactions of the Metallurgical Society of AIME, 245 (1969) 1834–1836.]Search in Google Scholar
[34. Ruhl R., Cohen M.: Splat quenching of iron–carbon alloys. Transactions of the Metallurgical Society of AIME 245 (1969) 241–251.]Search in Google Scholar