<abstract xmlns="http://www.w3.org/1999/xhtml"> The paper presents the study results on chemical composition of the coarse primary M7C3 carbides occurring in the soft annealed NC11LV/D2 tool steel consisting of: 1.53% C; 11.65% Cr; 0.01% W; 0.81% Mo; 0.068% V; (balance iron plus admixtures), used for cold operation. The microanalyzer of type SEMPROBE Su-30, French made by CAMECA Co., equipped with two WDS X-ray spectrometers and an EDS VOYAGER 3 100, NORAN Instruments Co., made in USA. It was found that out of the three alloying elements occurring in the big carbides of the annealed NC11LV/D2 steel, i.e. Cr, Mo, and V, the chromium appears to be the most uniformly distributed. The big carbides vary concerning C, Cr, Mo, V; the greatest differentiation degree of the contents of Mo and Cr, and the least - of vanadium. The average chemical composition of the big/coarse carbides is as follows: C = 9.42±1.28%; Cr = 44.17±2.95%; Mo = 4.48±3.52%; V = 4.53±0.31%; balance Fe.</abstract>

The paper presents the study results on chemical composition of the coarse primary M7C3 carbides occurring in the soft annealed NC11LV/D2 tool steel consisting of: 1.53% C; 11.65% Cr; 0.01% W; 0.81% Mo; 0.068% V; (balance iron plus admixtures), used for cold operation. The microanalyzer of type SEMPROBE Su-30, French made by CAMECA Co., equipped with two WDS X-ray spectrometers and an EDS VOYAGER 3 100, NORAN Instruments Co., made in USA. It was found that out of the three alloying elements occurring in the big carbides of the annealed NC11LV/D2 steel, i.e. Cr, Mo, and V, the chromium appears to be the most uniformly distributed. The big carbides vary concerning C, Cr, Mo, V; the greatest differentiation degree of the contents of Mo and Cr, and the least - of vanadium. The average chemical composition of the big/coarse carbides is as follows: C = 9.42±1.28%; Cr = 44.17±2.95%; Mo = 4.48±3.52%; V = 4.53±0.31%; balance Fe.

Fluctuations in Chemical Composition of M7C3 Carbides in the Soft Annealed Nc11lv/D2 Steel

Koszalin University of Technology, Faculty of Mechanical Engineering, Racławicka 15-17 75-620 Koszalin, Poland

Advances in Materials Science

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Fluctuations in Chemical Composition of MC Carbides in the Soft Annealed Nc11lv/D2 Steel

The paper presents the study results on chemical composition of the coarse primary M7C3 carbides occurring in the soft annealed NC11LV/D2 tool steel consisting...

Fluctuations in Chemical Composition of M₇C₃ Carbides in the Soft Annealed Nc11lv/D2 Steel

Data publikacji: 25 kwi 2014

Zakres stron: 24 - 30

DOI: https://doi.org/10.2478/adms-2014-0003

Słowa kluczowe
D2 tool steel, primary carbides M7C3, carbides distribution, chemical composition, chromium distribution

© by T. Hryniewicz

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Fluctuations in Chemical Composition of M7C3 Carbides in the Soft Annealed Nc11lv/D2 Steel

Data publikacji: 25 kwi 2014

Zakres stron: 24 - 30

DOI: https://doi.org/10.2478/adms-2014-0003

Słowa kluczoweD2 tool steel, primary carbides M7C3, carbides distribution, chemical composition, chromium distribution

© by T. Hryniewicz

This article is distributed under the terms of the Creative Commons Attribution Non-Commercial License, which permits unrestricted non-commercial use, distribution, and reproduction in any medium, provided the original work is properly cited.

Fluctuations in Chemical Composition of M₇C₃ Carbides in the Soft Annealed Nc11lv/D2 Steel

Słowa kluczowe
D2 tool steel, primary carbides M7C3, carbides distribution, chemical composition, chromium distribution