<abstract xmlns="http://www.w3.org/1999/xhtml"><p>The relevance and nature of a new technology for measurement of vibrational displacement of a material point through normal toward the object plane are stated in the article. This technology provides registration and processing of images of a round mark or a matrix of round marks, which are applied to the surface of a control object. A measuring signal here is the module of radius increment of the round mark image at vibrational blurring of this image. The method for calculation of the given error of measurements, as a function of a number of pixels of the round mark image, has been developed and proven in the present research. The results of pilot studies are given. Linearity of transformation of the measured size into a measuring signal has been proven. The conditions of a technical compromise between the field of view area of a recording device during distribution measurement of vibrational displacements along the surface of a control object, and the accuracy of this measurement are determined. The results are illustrated with numerical examples of calculations of the given error of measurements in the set field of view and the one at the given maximum set error of measurements.</p></abstract>

The relevance and nature of a new technology for measurement of vibrational displacement of a material point through normal toward the object plane are stated in the article. This technology provides registration and processing of images of a round mark or a matrix of round marks, which are applied to the surface of a control object. A measuring signal here is the module of radius increment of the round mark image at vibrational blurring of this image. The method for calculation of the given error of measurements, as a function of a number of pixels of the round mark image, has been developed and proven in the present research. The results of pilot studies are given. Linearity of transformation of the measured size into a measuring signal has been proven. The conditions of a technical compromise between the field of view area of a recording device during distribution measurement of vibrational displacements along the surface of a control object, and the accuracy of this measurement are determined. The results are illustrated with numerical examples of calculations of the given error of measurements in the set field of view and the one at the given maximum set error of measurements.

Determination of Vibrational Displacement Measurement Error Based on the Blurring Analysis of a Round Mark Image

Penza State University of Architecture and Construction

Applied Computer Systems

This work is licensed under the Creative Commons Attribution 4.0 Public License.

The relevance and nature of a new technology for measurement of vibrational displacement of a material point through normal toward the object plane are stated...

Determination of Vibrational Displacement Measurement Error Based on the Blurring Analysis of a Round Mark Image

Data publikacji: 31 gru 2018

Zakres stron: 150 - 160

DOI: https://doi.org/10.2478/acss-2018-0019

Słowa kluczowe
Accuracy, blurring, displacement, error, image, raster unit, measurement, vibration

© 2018 Alexey Grigorev et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 Public License.

Determination of Vibrational Displacement Measurement Error Based on the Blurring Analysis of a Round Mark Image

Data publikacji: 31 gru 2018

Zakres stron: 150 - 160

DOI: https://doi.org/10.2478/acss-2018-0019

Słowa kluczoweAccuracy, blurring, displacement, error, image, raster unit, measurement, vibration

© 2018 Alexey Grigorev et al., published by Sciendo

This work is licensed under the Creative Commons Attribution 4.0 Public License.

Słowa kluczowe
Accuracy, blurring, displacement, error, image, raster unit, measurement, vibration