<abstract xmlns="http://www.w3.org/1999/xhtml"><p>This work aimed to determine the effect of packing density on the sublimation rate in a laboratory freeze dryer. Total amount of sublimed water was determined by gravimetric method while a total of seven experiments were performed under the same conditions (pressure, temperature, and drying time), at different configuration of the vials. The experiments confirmed that the higher the packing density, the lower the drying rate, and vice versa, the lower the packing density, the higher the drying rate. The effect of vials packing density was confirmed by experiments using a plastic rack, while the vials were separated and thus the packing density was lower. In this case, the drying rate was more homogeneous, which contributes to the higher quality of the final product.</p></abstract>

This work aimed to determine the effect of packing density on the sublimation rate in a laboratory freeze dryer. Total amount of sublimed water was determined by gravimetric method while a total of seven experiments were performed under the same conditions (pressure, temperature, and drying time), at different configuration of the vials. The experiments confirmed that the higher the packing density, the lower the drying rate, and vice versa, the lower the packing density, the higher the drying rate. The effect of vials packing density was confirmed by experiments using a plastic rack, while the vials were separated and thus the packing density was lower. In this case, the drying rate was more homogeneous, which contributes to the higher quality of the final product.

Impact of packing density on primary drying rate

Department of Chemical and Biochemical Engineering, Institute of Chemical and Environmental Engineering, Faculty of Chemical and Food Technology

Slovak University of Technology in Bratislava

Acta Chimica Slovaca

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"Impact of packing density on primary drying rate"}

This work aimed to determine the effect of packing density on the sublimation rate in a laboratory freeze dryer. Total amount of sublimed water was determined...

Impact of packing density on primary drying rate

Data publikacji: 18 lis 2020

Zakres stron: 30 - 37

DOI: https://doi.org/10.2478/acs-2020-0021

Słowa kluczowe
freeze-drying, gravimetric studies, lyophilization, packing density

© 2020 Anna Matejčíková et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Impact of packing density on primary drying rate

Data publikacji: 18 lis 2020

Zakres stron: 30 - 37

DOI: https://doi.org/10.2478/acs-2020-0021

Słowa kluczowefreeze-drying, gravimetric studies, lyophilization, packing density

© 2020 Anna Matejčíková et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
freeze-drying, gravimetric studies, lyophilization, packing density