<abstract xmlns="http://www.w3.org/1999/xhtml">The objective of the present study was to develop a robust, simple, economical and sensitive HPLC-UV method using the “quality-by-design” approach for the estimation of irinotecan (IRI) in marketed formulations. RP-HPLC method was developed by applying Box-Behnken design with Hyper-Clone (Phenomenex®) C18 column (250 × 4.6 mm id, particle size 5 µm, ODS 130 Å) as a stationary phase. Acetonitrile and 20 mmol L−1 potassium phosphate buffer (pH 2.5) containing 0.1 % triethylamine in a ratio of 45:55 % (<italic>V/V</italic>) was used as a mobile phase. The sample was injected in a volume of 20 µL into the HPLC system. UV detector at 254 nm was used to estimate and quantify IRI. Isocratic elution was opted while the flow rate was maintained at 0.75 mL min−1. The retention time of IRI was found to be 4.09 min. The responses were found to be linear for concentration range of 0.5 to 18.0 µg mL−1 and the coefficient of determination value was found to be 0.9993. Percent relative standard deviation for intra- and inter-day precisions was found in the range of 0.1 to 0.4 %. <italic>LOD</italic> and <italic>LOQ</italic> values were found to be 4.87 and 14.75 ng mL−1, resp. Robustness studies confirmed that the developed method is robust with RSD of a maximum 0.1 %. The method is simple, precise, sensitive, robust and economical making it applicable to the estimation of IRI in an injectable formulation.</abstract>

The objective of the present study was to develop a robust, simple, economical and sensitive HPLC-UV method using the “quality-by-design” approach for the estimation of irinotecan (IRI) in marketed formulations. RP-HPLC method was developed by applying Box-Behnken design with Hyper-Clone (Phenomenex®) C18 column (250 × 4.6 mm id, particle size 5 µm, ODS 130 Å) as a stationary phase. Acetonitrile and 20 mmol L−1 potassium phosphate buffer (pH 2.5) containing 0.1 % triethylamine in a ratio of 45:55 % (V/V) was used as a mobile phase. The sample was injected in a volume of 20 µL into the HPLC system. UV detector at 254 nm was used to estimate and quantify IRI. Isocratic elution was opted while the flow rate was maintained at 0.75 mL min−1. The retention time of IRI was found to be 4.09 min. The responses were found to be linear for concentration range of 0.5 to 18.0 µg mL−1 and the coefficient of determination value was found to be 0.9993. Percent relative standard deviation for intra- and inter-day precisions was found in the range of 0.1 to 0.4 %. LOD and LOQ values were found to be 4.87 and 14.75 ng mL−1, resp. Robustness studies confirmed that the developed method is robust with RSD of a maximum 0.1 %. The method is simple, precise, sensitive, robust and economical making it applicable to the estimation of IRI in an injectable formulation.

An analytical “quality by design” approach in RP-HPLC method development and validation for reliable and rapid estimation of irinotecan in an injectable formulation

Department of Pharmaceutics Manipal College of Pharmaceutical Sciences

Acta Pharmaceutica

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

The objective of the present study was to develop a robust, simple, economical and sensitive HPLC-UV method using the “quality-by-design” approach for the...

An analytical “quality by design” approach in RP-HPLC method development and validation for reliable and rapid estimation of irinotecan in an injectable formulation

Data publikacji: 20 lip 2020

Zakres stron: 57 - 79

Przyjęty: 02 kwi 2020

DOI: https://doi.org/10.2478/acph-2021-0008

Słowa kluczowe
irinotecan, HPLC-UV, “quality by design”, full factorial design, Box-Behnken design

© 2021 Navya Ajitkumar Bhaskaran et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

An analytical “quality by design” approach in RP-HPLC method development and validation for reliable and rapid estimation of irinotecan in an injectable formulation

Data publikacji: 20 lip 2020

Zakres stron: 57 - 79

Przyjęty: 02 kwi 2020

DOI: https://doi.org/10.2478/acph-2021-0008

Słowa kluczoweirinotecan, HPLC-UV, “quality by design”, full factorial design, Box-Behnken design

© 2021 Navya Ajitkumar Bhaskaran et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.

Słowa kluczowe
irinotecan, HPLC-UV, “quality by design”, full factorial design, Box-Behnken design