<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Arrays of freestanding upright palladium nanotubes have been fabricated using a bottom-up method of electrodepositing into anodised alumina pores. Optical transmission measurements carried out with a range of post- fabrication treatment methods suggest that hydrogen diffuses into both the inner and outer surface areas of the tube structure. Furthermore, scanning electron microscopy of the same sample before and after cycling hydrogen exposure show that the structures appear undamaged by the repeated lattice expansion.</p></abstract>

Arrays of freestanding upright palladium nanotubes have been fabricated using a bottom-up method of electrodepositing into anodised alumina pores. Optical transmission measurements carried out with a range of post- fabrication treatment methods suggest that hydrogen diffuses into both the inner and outer surface areas of the tube structure. Furthermore, scanning electron microscopy of the same sample before and after cycling hydrogen exposure show that the structures appear undamaged by the repeated lattice expansion.

Palladium Nanotubes for Optical Hydrogen Sensing: The Fabrication and Characterisation of Arrays of Nanostructures

International Journal on Smart Sensing and Intelligent Systems

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Arrays of freestanding upright palladium nanotubes have been fabricated using a bottom-up method of electrodepositing into anodised alumina pores. Optical...

Palladium Nanotubes for Optical Hydrogen Sensing: The Fabrication and Characterisation of Arrays of Nanostructures

Data publikacji: 15 lut 2020

Zakres stron: 1 - 4

DOI: https://doi.org/10.21307/ijssis-2019-095

Słowa kluczowe
component, optical sensing, gas sensing, palladium, hydrogen, nanotubes

© 2019 Authors., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Palladium Nanotubes for Optical Hydrogen Sensing: The Fabrication and Characterisation of Arrays of Nanostructures

Data publikacji: 15 lut 2020

Zakres stron: 1 - 4

DOI: https://doi.org/10.21307/ijssis-2019-095

Słowa kluczowecomponent, optical sensing, gas sensing, palladium, hydrogen, nanotubes

© 2019 Authors., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
component, optical sensing, gas sensing, palladium, hydrogen, nanotubes