<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>In this paper, a low cost fabrication of sub micron features size SAW device with conventional lithography and their application for toxic chemical vapor detection has been presented. The SAW devices with different interdigital transducer (IDT) electrodes line widths were designed and fabricated. The fabricated SAW devices features had an accuracy of ± 0.1 μm. Frequency response of the SAW devices was measured with vector network analyzer for design parameter confirmation. The fabricated devices have been configured in multisensory oscillator configuration and tested with chemical ware fare agents simulants at very low concentration (ppb).</p></abstract>

In this paper, a low cost fabrication of sub micron features size SAW device with conventional lithography and their application for toxic chemical vapor detection has been presented. The SAW devices with different interdigital transducer (IDT) electrodes line widths were designed and fabricated. The fabricated SAW devices features had an accuracy of ± 0.1 μm. Frequency response of the SAW devices was measured with vector network analyzer for design parameter confirmation. The fabricated devices have been configured in multisensory oscillator configuration and tested with chemical ware fare agents simulants at very low concentration (ppb).

Fabrication of High Frequency Surface Acoustic Wave (SAW) Devices for Real Time Detection of Highly Toxic Chemical Vapors

International Journal on Smart Sensing and Intelligent Systems

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

In this paper, a low cost fabrication of sub micron features size SAW device with conventional lithography and their application for toxic chemical vapor...

Fabrication of High Frequency Surface Acoustic Wave (SAW) Devices for Real Time Detection of Highly Toxic Chemical Vapors

Data publikacji: 01 wrz 2015

Zakres stron: 1601 - 1623

Otrzymano: 05 maj 2015

Przyjęty: 12 lip 2015

DOI: https://doi.org/10.21307/ijssis-2017-821

© 2015 Upendra Mittal et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.