<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>This paper reviews some of the recent applications of optical tomography as a measurement tool for process parameters measurement such as flow concentration profiles, velocity profiles, and mass flow rate. The attentions that have been received by the optical tomography system for the applications of industrial parameters measurement are mainly because of the radiation safe emission of light sources to human or environment, fast response time, non-intrusive technique, and established models of light propagation through media or medium of interest thus making the solutions of forward and inverse problems to be relatively simpler to accomplish. The reports of the experimental result in this paper are mainly based on the previous works done by researchers in the area of optical tomography application where the main aspects are discussed. As a whole, the optical tomography can be applied to measure the velocity of beads in flow rig, measuring bubbles flow, flame imaging for combustion rate estimation, and flow concentration profile. Most of the applications as mentioned are discussed in this paper. In the final parts of this paper, independent component analysis (ICA) is suggested to measure the turbidity of liquid with the air-bubble flow in a vertical pipe column.</p></abstract>

This paper reviews some of the recent applications of optical tomography as a measurement tool for process parameters measurement such as flow concentration profiles, velocity profiles, and mass flow rate. The attentions that have been received by the optical tomography system for the applications of industrial parameters measurement are mainly because of the radiation safe emission of light sources to human or environment, fast response time, non-intrusive technique, and established models of light propagation through media or medium of interest thus making the solutions of forward and inverse problems to be relatively simpler to accomplish. The reports of the experimental result in this paper are mainly based on the previous works done by researchers in the area of optical tomography application where the main aspects are discussed. As a whole, the optical tomography can be applied to measure the velocity of beads in flow rig, measuring bubbles flow, flame imaging for combustion rate estimation, and flow concentration profile. Most of the applications as mentioned are discussed in this paper. In the final parts of this paper, independent component analysis (ICA) is suggested to measure the turbidity of liquid with the air-bubble flow in a vertical pipe column.

A Review on Applications of Optical Tomography in Industrial Process

Faculty of Electrical Engineering Universiti Teknologi Malaysia

International Journal on Smart Sensing and Intelligent Systems

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"A Review on Applications of Optical Tomography in Industrial Process"}

This paper reviews some of the recent applications of optical tomography as a measurement tool for process parameters measurement such as flow concentration...

A Review on Applications of Optical Tomography in Industrial Process

Data publikacji: 01 gru 2012

Zakres stron: 767 - 798

Otrzymano: 07 paź 2012

Przyjęty: 23 lis 2012

DOI: https://doi.org/10.21307/ijssis-2017-506

© 2012 M. T. M. Khairi et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.