<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>Acoustic sensing is a viable approach for solving issues related to many applications, namely, biomedical, distance measurements, mechanical, health infrastructure monitoring, etc. It is generally sustainable and of no negative impact on the object under test. The use of acoustic sensing under beamforming technique is an important asset to be exploited, especially for the aforementioned applications. This paper illustrates a generalized approach of modeling and designing a full beamfomer using two specific classes: LCMP (Linear Constrained Minimum Power) beamformers that are used to overcome robustness limitations and MVDR (Minimum Variance Distortionless Response) beamformers. Any aspect of modeling and designing is always related to the DOA (Direction of Arrival). The obtained results are based on assumptions extracted from an actual case of constructed system.</p>
</abstract>

Acoustic sensing is a viable approach for solving issues related to many applications, namely, biomedical, distance measurements, mechanical, health infrastructure monitoring, etc. It is generally sustainable and of no negative impact on the object under test. The use of acoustic sensing under beamforming technique is an important asset to be exploited, especially for the aforementioned applications. This paper illustrates a generalized approach of modeling and designing a full beamfomer using two specific classes: LCMP (Linear Constrained Minimum Power) beamformers that are used to overcome robustness limitations and MVDR (Minimum Variance Distortionless Response) beamformers. Any aspect of modeling and designing is always related to the DOA (Direction of Arrival). The obtained results are based on assumptions extracted from an actual case of constructed system.

MODELING AND DESIGNING A FULL BEAMFORMER FOR ACOUSTIC SENSING AND MEASUREMENT

International Journal on Smart Sensing and Intelligent Systems

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

{"article-title":"MODELING AND DESIGNING A FULL BEAMFORMER FOR ACOUSTIC SENSING AND MEASUREMENT"}

Acoustic sensing is a viable approach for solving issues related to many applications, namely, biomedical, distance measurements, mechanical, health...

MODELING AND DESIGNING A FULL BEAMFORMER FOR ACOUSTIC SENSING AND MEASUREMENT

Data publikacji: 01 mar 2017

Zakres stron: 1 - 17

Otrzymano: 21 cze 2017

Przyjęty: 21 lip 2017

DOI: https://doi.org/10.21307/ijssis-2017-231

Słowa kluczowe
Acoustic sensing, Beamforming, Ultrasonic shape detection, DOA, Distance measurement, array of sensors, interference-to-noise ratio (INR), signal-to-noise ratio (SNR)

© 2017 A. Lay-Ekuakille et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

MODELING AND DESIGNING A FULL BEAMFORMER FOR ACOUSTIC SENSING AND MEASUREMENT

Data publikacji: 01 mar 2017

Zakres stron: 1 - 17

Otrzymano: 21 cze 2017

Przyjęty: 21 lip 2017

DOI: https://doi.org/10.21307/ijssis-2017-231

Słowa kluczoweAcoustic sensing, Beamforming, Ultrasonic shape detection, DOA, Distance measurement, array of sensors, interference-to-noise ratio (INR), signal-to-noise ratio (SNR)

© 2017 A. Lay-Ekuakille et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
Acoustic sensing, Beamforming, Ultrasonic shape detection, DOA, Distance measurement, array of sensors, interference-to-noise ratio (INR), signal-to-noise ratio (SNR)