<abstract xmlns="http://www.w3.org/1999/xhtml">

<p>The modern basic civil engineering concept is to design simplistic structures, by using innovative brand new manufacturing and assemblage concepts. As a result of this concept, arch type steel plates are used like the corrugated coatings. The main purpose of this work is to describe the Roll Form Machine (RFM) technology as used for the structures, especially for the roofs. Cold formed arch type steel structures may be fast and simple. These types of structures were used for temporary buildings in the US Army. Nowadays, this technology becomes popular and gets in consideration for civil life. However, the design concept of this technology does not have a theoretical model, and the calculations are evaluated according to the United States Standards. The uniaxial compressive behaviors of corrugated arch type steel members are observed, experimentally within this work.</p>
</abstract>

The modern basic civil engineering concept is to design simplistic structures, by using innovative brand new manufacturing and assemblage concepts. As a result of this concept, arch type steel plates are used like the corrugated coatings. The main purpose of this work is to describe the Roll Form Machine (RFM) technology as used for the structures, especially for the roofs. Cold formed arch type steel structures may be fast and simple. These types of structures were used for temporary buildings in the US Army. Nowadays, this technology becomes popular and gets in consideration for civil life. However, the design concept of this technology does not have a theoretical model, and the calculations are evaluated according to the United States Standards. The uniaxial compressive behaviors of corrugated arch type steel members are observed, experimentally within this work.

THE PRELIMINARY UNIAXIAL COMPRESSION BEHAVIOR OF CORRUGATED COLD FORMED STEEL MEMBERS

Architecture, Civil Engineering, Environment

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

The modern basic civil engineering concept is to design simplistic structures, by using innovative brand new manufacturing and assemblage concepts. As a result...

THE PRELIMINARY UNIAXIAL COMPRESSION BEHAVIOR OF CORRUGATED COLD FORMED STEEL MEMBERS

Article Category: review

Data publikacji: 06 sie 2019

Zakres stron: 105 - 116

Otrzymano: 31 maj 2018

Przyjęty: 18 lut 2019

DOI: https://doi.org/10.21307/acee-2019-027

Słowa kluczowe
Cold formed steel, Corrugated arch, Shell type steel section, Uniaxial load.

© 2019 Mahmut KILIÇ et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

THE PRELIMINARY UNIAXIAL COMPRESSION BEHAVIOR OF CORRUGATED COLD FORMED STEEL MEMBERS

Article Category: review

Data publikacji: 06 sie 2019

Zakres stron: 105 - 116

Otrzymano: 31 maj 2018

Przyjęty: 18 lut 2019

DOI: https://doi.org/10.21307/acee-2019-027

Słowa kluczoweCold formed steel, Corrugated arch, Shell type steel section, Uniaxial load.

© 2019 Mahmut KILIÇ et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Słowa kluczowe
Cold formed steel, Corrugated arch, Shell type steel section, Uniaxial load.