Fem Analysis Of Corrugated Web Girders Reinforced With Tensioned Diagonal Braces

[1]Abaqus software adjustment to estimate resistance of corrugated web girders reinforced with tension diagonal braces. This research was supported in part by PL-GRID infrastructure, and also by the WIND grant Search in Google Scholar

[2]Basiński W., Kowal Z.: Investigations into the resistance of SIN girders reinforced with tensioned diagonal braces. Architecture Civil Engineering Environment ACEE. In review Search in Google Scholar

[3]Basiński W., Kowal Z.; Model rotational stiffness of semirigid end joints girders with corrugated web. LII Scientific conference KILIW PAN and KNPZITB, Krynica 2006 (in Polish) Search in Google Scholar

[4]Basiński W., Kowal Z.; The shear resistance of girders with corrugated web. Inżynieria i Budownictwo, No.4, 2008; pp.197-200 (in Polish) Search in Google Scholar

[5]Basiński W., Kowal Z.; The influence of the stiffness of end stiffeners on shear critical resistance of corrugated web of girders. Konstrukcje Stalowe No.3, 2013; p.50-54 (in Polish) Search in Google Scholar

[6]Basiński W., Kowal Z.; The impact of corrugated web stiffness on SIN girder deflections in the light of experimental research. Proceedings of the 10^th International Conference on New Trends in Statics and Dynamics of Buildings, October 3-5, 2012 Bratislava Search in Google Scholar

[7]Górecki M., Łagoda. G, Łagoda. M.; Bridge girders with the corrugated web in the light of experimental studies. Scientific Papers Rzeszow University of Technology, No. 283 Construction and Environmental Engineering Rzeszow 59^th 2012 (in Polish) Search in Google Scholar

[8]Easley J. T.; Buckling formulas for corrugated metal shear diaphragms. Journal of the Structural Division, ASCE, ST7, 101, 197510.1061/JSDEAG.0004095 Search in Google Scholar

[9]Eldib M.E.A.-H.; Shear buckling strength and design of curved corrugated steel webs for bridges. Journal of Constructional Steel Research, 65, 200910.1016/j.jcsr.2009.07.002 Search in Google Scholar

[10]Elgaaly M., Hamilton R.W., Seshadri A.; Shear strength of beams with corrugated webs. Journal of Structural Engineering, 122(4), 199610.1061/(ASCE)0733-9445(1996)122:4(390) Search in Google Scholar

[11]Kowal Z.; Sheet Metal Girders with vertical and diagonal ribs. Scientific Papers of the Wrocław University of Technology. Construction XXI, Wrocław 1964 (in Polish) Search in Google Scholar

[12]B. A. Memon; Arc-length technique for nonlinear finite element analysis. Journal of Zhejiang University SCIENCE, 5 (5) 618-628, 200410.1631/jzus.2004.0618 Search in Google Scholar

[13]Mendera Z., Kuchta K.: Analysis of the behaviour of steel beams with corrugated web in the light of experimental studies. XLIX Scientific conference KILiW PAN and KN PZITB, Krynica 2003 (in Polish) Search in Google Scholar

[14]Novak R., Machacek J.: Design resistance of undulating webs under patch loading. Proceedings of the Third International Conference on Coupled Instabilities in Metal Structures VIMS 2000, Lisbon, Portugal 200010.1142/9781848160095_0042 Search in Google Scholar

[15]Pasternak H. Brańka P.; Tragverhalten von Wellstegtragern unter lokaler Lasteinleitung, (Resistance of beams with corrugated web under locally applied load), Bauingenieur 5/1999 (in German) Search in Google Scholar

[16]Seydel E.; Beitrag zur Frage des Ausbeulens von versteiften Platten bei Schubbeanspruchung, 195. Bericht der Deutschen Versuchsanstalt für Luftfahrt, E.V., (Contribution to the question of buckling of strengthened plates at shearing stress, 195^th Report of German Research Institute for Aeronautics, registered association), Berlin-Adlershof, 1930, pp. 235-254 (in German) Search in Google Scholar

[17]The research project N N506 072538 titled: Shaping frameworks girder on the corrugated web joined by end plates. Silesian University of Technology 2013 (in Polish) Search in Google Scholar

[18]Profiles of corrugated web of SIN girders. Principles of dimensioning. Cracow University of Technology. Cracow 2002 (in Polish) Search in Google Scholar

[19]Eurocode 3, Design of steel structures. Part 1-5: Plated structural elements, EN 1993-1-5, 2008 Search in Google Scholar

[20]EN 10002-1:2001. Metallic materials – Tensile testing – Part 1: Method of test at ambient temperature Search in Google Scholar