<abstract xmlns="http://www.w3.org/1999/xhtml">

This study investigated the impact of two different heating rates (10 and 20 °C/min) on the thermal characteristics of three specific polymers: high-density polyethylene (HDPE), polypropylene (PP) and polyvinylchloride (PVC). A twin-screw extruder was employed to prepare the samples. In order to examine the influence of heating rate, differential scanning calorimetry (DSC) was used. The results of the differential scanning calorimetry (DSC) analysis, including the glass transition temperature (Tg), melting temperature (Tm), enthalpy change (ΔHm) and crystallization temperature (Tc), indicate that the melting temperature and enthalpy drops for polyethylene (PE), polypropylene (PP) and polyvinyl chloride (PVC) when the heating rate increases. Furthermore, there is a minor alteration in the Tc. These studies are also of significant importance for the future of construction, which increasingly emphasizes ecological and sustainable solutions.
</abstract>

This study investigated the impact of two different heating rates (10 and 20 °C/min) on the thermal characteristics of three specific polymers: high-density polyethylene (HDPE), polypropylene (PP) and polyvinylchloride (PVC). A twin-screw extruder was employed to prepare the samples. In order to examine the influence of heating rate, differential scanning calorimetry (DSC) was used. The results of the differential scanning calorimetry (DSC) analysis, including the glass transition temperature (Tg), melting temperature (Tm), enthalpy change (ΔHm) and crystallization temperature (Tc), indicate that the melting temperature and enthalpy drops for polyethylene (PE), polypropylene (PP) and polyvinyl chloride (PVC) when the heating rate increases. Furthermore, there is a minor alteration in the Tc. These studies are also of significant importance for the future of construction, which increasingly emphasizes ecological and sustainable solutions.

Heating rate effect on the thermal properties of thermoplastic polyolefins

Construction of Optimized Energy Potential

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

{"article-title":"Heating rate effect on the thermal properties of thermoplastic polyolefins"}

This study investigated the impact of two different heating rates (10 and 20 °C/min) on the thermal characteristics of three specific polymers: high-density...

Heating rate effect on the thermal properties of thermoplastic polyolefins

Data publikacji: 22 cze 2024

Zakres stron: 71 - 77

DOI: https://doi.org/10.17512/bozpe.2024.13.08

Słowa kluczowe
HDPE, PP, PVC, heating rate, DSC, construction, ecology and sustainable development

© 2024 Ohood Hmaizah Sabr et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Heating rate effect on the thermal properties of thermoplastic polyolefins

Data publikacji: 22 cze 2024

Zakres stron: 71 - 77

DOI: https://doi.org/10.17512/bozpe.2024.13.08

Słowa kluczoweHDPE, PP, PVC, heating rate, DSC, construction, ecology and sustainable development

© 2024 Ohood Hmaizah Sabr et al., published by Sciendo

This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License.

Słowa kluczowe
HDPE, PP, PVC, heating rate, DSC, construction, ecology and sustainable development